Utilisation of imploded glass in structural concrete
Source abstract
Abstract
Abstract Land-filling waste has become a problem and a waste in itself. A lot of material that is being land-filled can be reused with minimal processing reducing demand on natural resources and landfills. Concrete is an ideal material for the reuse of glass and other waste materials. Crushed glass has been used as aggregate replacement resulting in a poor bond and concrete exhibiting alkali–silica reaction (ASR). Reduction to finer particles and use as cement replacement produced good quality concrete that did not exhibit ASR. The implosion technology results in waste glass that is easier to handle and of a much better quality to reuse and is thus an improvement over glass crushing. The aim of this study was to compare concretes using waste glass that had been either crushed or imploded replacing the cement in 10–50% proportions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Nuclear materials and radiation effects · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Use of fine glass as ASR inhibitor in glass aggregate mortars10.1016/j.conbuildmat.2009.12.030 ↗
2. Properties of concrete contains mixed colour waste recycled glass as sand and cement replacement10.1016/j.conbuildmat.2007.01.019 ↗
3. International standards organization, ISO 2007, The ISPO survey of certifications, business plan; 2005.
4. .
5. .
6. Waste glass as coarse aggregate for concrete10.1520/JTE10117J ↗
7. Potential for using waste glass in Portland cement concrete10.1061/(ASCE)0899-1561(1998)10:4(210) ↗
8. Samarin A. Use of fine crushed bottle glass sand and partial cement replacement in concrete. UNICIV report no. R-193 (1980) University of South Wales.
9. Reuse of ground waste glass as aggregate for mortars10.1016/j.wasman.2004.12.009 ↗
10. Characteristics and pozzolanic reactivity of glass powders10.1016/j.cemconres.2004.05.015 ↗
11. Studies on concrete containing ground waste glass10.1016/S0008-8846(99)00213-6 ↗
12. Waste glass as concrete aggregate and pozzolan
13. A suggested screening test for ASR in cement-bound composites containing aggregate based on autoclaving10.1016/j.cemconcomp.2003.03.001 ↗
14. Chemical reactions of glass cullet used as cement component10.1061/(ASCE)0899-1561(2001)13:6(412) ↗
15. Value-added utilization of waste glass in concrete10.1016/S0008-8846(03)00251-5 ↗
16. British standard institution, BS EN 933-1 (1997). Tests for geometrical properties of aggregates; part 1: determination of particle size distribution – sieving method.
17. British standard institution, BS EN 1097-6 (2000). Tests for mechanical and physical properties of aggregates; part 6: determination of particle density and water absorption.
18. British standard institution, BS EN 1097-5 (1999). Tests for mechanical and physical properties of aggregates; part 5: determination of water content by drying in a ventilated oven.
19. British standard institution, BS 812-111 (1990). Testing aggregates; part 111: methods for determination of ten per cent fines value (TFV).
20. British standard institution, BS 812-112 (1990). Testing aggregates; part 112: methods for determination of aggregate impact value (AIV).
21. British standard institution, BS EN 196-6 (1992). Methods of testing cement; part 6: determination of fineness.
22. Teychenne DC, Franklin RE, Erntroy HC. Design of normal concrete mixes, department of the environment building research establishment transport and road research laboratory; 1975.
23. British standard institution, BS EN 12350-2 (2000). Testing fresh concrete; slump test.
24. .
25. British standard institution, BS EN 12350-6 (2000). Testing fresh concrete; density.
26. British standard institution, BS EN 12390-2 (2000). Testing hardened concrete; making and curing specimens for strength tests.
27. British standard institution, BS EN 12390-3 (2002). Testing hardened concrete; compressive strength of test specimens.
28. British standard institution, BS EN 12390-5 (2002). Testing hardened concrete; flexural strength of test specimens.
29. British standard institution, BS 12390-7 (2000). Testing hardened concrete. Density of hardened concrete.
30. British standard institution, BS 1881-203 (1986). Testing concrete. Recommendations for measurement of velocity of ultrasonic pulses in concrete.
31. American standards for testing materials, ASTM C1202 (2009). Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration.
32. .