journal article·2015-05Open access

Impact of aggregate grading and air-entrainment on the properties of fresh and hardened mortars

Roberto Cesar de Oliveira Romano, Danilo dos Reis Torres, Rafael Giuliano Pileggi

Abstract

The great variance in the properties of mortars in the fresh and hardened state or during performance in use may be associated with a lack of control over materials and admixtures. Thus, the main purpose of this work is to evaluate the impacts that aggregates size distribution, the proportion of entrained air and the type of air-entraining admixtures have on the fresh and hardened properties of mortars. Mortar mixing behavior and air-entrainment were monitored to understand the changes in the fresh properties while the hardened properties were quantified by the porosity, mechanical strength, modulus of elasticity, adhesion and air-permeability. The results show that variations in the aggregates size distribution cause considerable impact during the mixing stage but these impacts are lessened by the use of air-entraining admixtures. Contrarily, in the hardened state, only the air-permeability was influenced by the size distribution, although, the other properties were impacted by the air-entrainment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Antunes RPN. Influence of rheology and impact energy on adhesion of rendering mortar. 2006. Thesis (PhD). Universidade de São Paulo. São Paulo; 2006 [in Portuguese].
2. Impact of the mixer and time of mixing on the properties of industrialized mortar
3. Permeability optimization of hot aerosol filters prepared from foaming of ceramic suspensions10.1590/S0366-69132009000100009 ↗
4. Improving performance and robustness of SCC by adding supplementary cementitious materials10.1016/j.conbuildmat.2010.04.030 ↗
5. Measuring static stability and robustness of self-consolidating concrete using modified Segregation Probe10.1016/j.conbuildmat.2014.07.112 ↗
6. Bonin LC, Feuerharmel C, Carneiro AMP. Study of influence of sand granulometric distribution on workability of mortar. In: Simpósio Brasileiro de Tecnologia das Argamassas. Vitória; 1999. p. 371–8 [in Portuguese].
7. Carneiro AMP. Contribution to the study of influence of aggregate on the properties of mortars composed from different particle size distribution curves. Thesis (PhD). Escola Politécnica da Universidade de São Paulo; 1999. 170p. [in Portuguese].
8. Thoughts on particle size distribution and its correlation with the rheology of refractory concrete
9. Pileggi RG. Tools for development of refractory concretes. Thesis (PhD). Universidade Federal de São Carlos. Ciência e Engenharia de Materiais; 2001 [in Portuguese].
10. Rheology and granulometric distribution of pumpable refractory concrete
11. Salvador GAB. Optimization of aggregates granulometric distribution for use in rendering mortar in Sant’ana do Livramento – RS. Thesis (MSc); 2005 [in Portuguese].
12. Selmo SMS. Finer aggregates to rendering mortars. In: Simpósio Nacional de Materiais de Construção: Agregados, São Paulo; 1986. p. 27–43 [in Portuguese].
13. Romano RCO. Air incorporation in cementitious materials applied in civil construction. Thesis (PhD). Escola Politécnica da Universidade de São Paulo. Departamento de Engenharia de Construção Civil; 2013. 200p. [in Portuguese].
14. A two-chamber vacuum cell for measuring the coefficient of permeability to air of the concrete cover on site10.1007/BF02472595 ↗
15. Torrent RJ. Frenzer, G. Methods for measuring and assessing the characteristics of concrete cover on site. Report # 516. Office Fedéral des Routes. Zürich; 1995.
16. Permeability optimization and performance evaluation of hot aerosol filters made using foam incorporated alumina suspension10.1016/j.jhazmat.2008.05.025 ↗
17. The packing of particles10.1111/j.1151-2916.1930.tb16222.x ↗
18. Mechanisms of air entrainment in concrete10.1016/j.cemconres.2004.07.026 ↗
19. Romano RCO, Takahashi MM, Liberato CC, Pileggi RG. Fresh and hardened characterization of air-entrained cement pastes. In: XIII ICCC international congress on the chemistry of cement, Madrid – Spain; 2011.
20. Takahashi MM, Romano RCO, Pileggi RG, John VM. Foaming capacity of air-entrained admixture in presence of Portland cement solubilized ion. Revista de Iniciação Científica (USP). vol. II; 2010. p. 11–24 [in Portuguese].
21. Neto · 2002
22. Powers · 1968
23. Gonçalves SR, Bauer E. Study of case of the variation of mortar adhesion in the wall. VI SBTA – VI Simpósio Brasileiro da Tecnologia das Argamassas. Florianópolis. In: Simpósio Brasileiro de Tecnologia das Argamassas, São Paulo; 2005. p. 562–567 [in Portuguese].