journal article·2005-04Open access

Some engineering properties of natural building cut stones of Cyprus

Özgür Eren, Mustafa Bahali

Abstract

Abstract Natural building cut (NBC) stones are being used in Cyprus for ages to build masonry structures because of being abundant, relatively easy to cut and shape and good performance in many applications. Almost all of the historical buildings in Cyprus are made of these NBC stones. Although these stones are low cost construction materials, they are not widely used in these days. This is due to lack of knowledge causing incorrect construction methods and highly skilled labour requirement. For this study two quarries are selected and samples obtained were tested for some physical and mechanical properties. Traditional names of these NBC stones are Melusa Stone and Karpaz Stone (or Bouri Stone). The physical properties such as bulk density, water absorption, specific gravity and porosity were measured. The mechanical properties such as compressive strength, flexural strength, direct tensile strength, splitting tensile strength, point load strength, fire resistance, abrasion resistance and freeze-thaw resistance were measured. From the results obtained it can be said that Melusa stone behaved better than Karpaz stone. A regression analysis also provided a polynomial relation between compressive strength and burning temperature and flexural strength and burning temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Rock Mechanics and Modeling · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Tarimcioglu T, Technical report on a study for natural building (Bouri) stones of Cyprus (in Turkish). Higher Technological Institute, Department of Civil Engineering; 1985
2. Masonry walls: materials and construction10.1016/S0950-0618(01)00019-8 ↗
3. Dreghorn · 1978
4. Bahali M, MS Thesis, physical and mechanical properties of natural building cut stones of Cyprus. Department of Civil Engineering, Eastern Mediterranean University; 2002
5. Hakyemez · 2000
6. Gass IG. The geology and mineral resources of the Dhali area. Mem. Geological Survey Department of Cyprus 1960
7. Bates · 1987
8. Gökçen · 1982
9. Hendry · 2001
10. McNally GH, Soil and Rock Construction Materials. E FN Spon; 1988
11. Flexural strength and notch sensitivity in natural building stones: Carrara and Dionysos marble10.1016/S0950-0618(99)00035-5 ↗