Evaluation of building materials recycling on HMA permanent deformation
Source abstract
Abstract
Abstract Reclaimed building materials (RBM) for recycling are examined on hot mix asphalt (HMA) permanent deformation performance. Four types of aggregates used for mixtures are: (a) 100% river crush stone (CS); (b) 100% RBM; (c) 50% coarse and fine RBM plus 50% coarse and fine CS (50% RBM plus 50% CS); and (d) coarse RBM plus fine CS (C-RBM plus F-CS). Two types of asphalt cement AC-10 and AC-20 are used as a binder for mixtures. The test results indicate 50% RBM plus 50% CS mixed with AC-10 or AC-20 has the lowest wheel path deformation at 25 °C, but the highest permanent deformation at 60 °C. Concerning the permanent deformation, 100% RBM and C-RBM plus F-CS mixed are better than 100% river crush stone mixtures. The analysis of variance of permanent deformation shows that the types of aggregate have a significant effect, no matter what test temperatures and binders are used. The asphalt cement either AC-10 or AC-20 does not significantly affect the permanent deformation performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Ministry of Interior. Ministry of the Interior statistic data report. Taiwan, 2001
2. Buck D. Recycle concrete as a source of aggregate. ACI Materials Journal. No. 74-22, Michigan, 1977; pp. 212–21910.14359/11004 ↗
3. Mukai T, Kikuchi M, Koizumi H. Fundamental study on bond properties between recycled aggregate concrete and steel bar. Cement Association of Japan, 32nd review, Japan, 1978
4. Hasen TC. Recycling of demolished concrete and masonry. Report of Technical Committee 37-DRC Demolition and Reuse of Concrete, RILEM. International Conference in Japan, 1992
5. Federal Highway Administration (FHWA). User Guidelines for Waste and Byproduct Materials in Pavement Construction. Turner-Fairbank Highway Research Center, FHWA-RD-97-148, 1997
6. Petrarca RW, Galdiero VA. Summary of testing of recycled crushed concrete. Transportation Research Record No. 989, Washington DC, 1984; pp. 19–26
7. Senior SA, Szoke SI, Rogers CA. Ontario's experience with reclaimed materials for used as aggregates. Presented at the International Road Federation Conference, Calgary, Alberta, Canada, 1994
8. MTC, Ministry of Transportation and Communications. Highway Construction and Maintenance Manual. Taiwan, 1989
9. Nienelt G, Thamfald H. Evaluation of the resistance to deformation of different road structures and asphalt mixtures determined the pavement rutting tester. Proceedings, Association of Asphalt Paving Technologists (AAPT), vol. 57, St. Paul Minn, 1988; pp. 320–345
10. The Asphalt Institute (AI). Mix Design Methods for Asphalt Concrete and Other Hot Mix Types. MS-2, May, 1984
11. Roberts, Freddy L, Kandahl PS, Ray Brown E, Lee D-Y, Kennedy TW. Hot Mix Asphalt Materials, Mixture Design and Construction. NAPA Education Foundation, Lanham, Maryland, 1991