Influence of atmospheric steam curing by solar energy on the compressive and flexural strength of concretes
Source abstract
Abstract
In this paper, influence of atmospheric steam curing by solar energy on the compressive and flexural strength of concretes for precast elements was investigated. An experimental program was carried out to studying in parallel the effect of water/cement ratio (0.4, 0.5 and 0.6), the influence of cement type and the influence of curing methods (four methods of curing were used: water curing, air curing, steam curing at 29 C and steam curing at 45 C) on the compressive and flexural strength of concretes. Six formulations of similar workability made from ordinary Portland cement (CEM I 42.5) and a composite cement (CEM II/B 42.5) three of each type are studied. The results allow us to highlight the beneficial effect of a steam curing procedure to achieve high compressive and flexural strength, especially in the earlier ages of curing. However, after 28 days of steam curing, a strength reduction was observed in all samples. The technique of steam curing by solar energy is an effective technique for accelerated hardening of concretes, for a good strength and high electrical energy saving for precast concretes production. We can say that the increased compressive strength during the progress of the reaction of hydration is accompanied by an increase in flexural strength. Through the results obtained a gain of time and shorter manufacturing lead times to reach the compressive strength at 28 days in the free air after a one day steam curing and 3 days of hardening in the free air for the two types cement and the different w/c ratios. Published by Elsevier Ltd.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Greener energy: issues and challenges for Pakistan—solar energy prospective10.1016/j.rser.2012.02.043 ↗
2. A review on solar energy use in industries10.1016/j.rser.2010.12.018 ↗
3. Curing methods of precast concrete elements
4. Setting time: an important criterion to determine the length of the delay period before steam curing of concrete10.1016/S0008-8846(02)01058-X ↗
5. Steam-cured concrete incorporating mineral admixtures10.1016/S0008-8846(02)01028-1 ↗
6. The effect of excessive steam curing on Portland composite cement concrete10.1016/j.cemconres.2004.07.038 ↗
7. Scaling and corrosion resistance of steam-cured concrete10.1016/S0008-8846(03)00010-3 ↗
8. Optimum steam curing procedure in precasting plants
9. Neville · 2000
10. Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars10.1016/S0008-8846(97)00098-7 ↗
11. Mindess · 1981
12. Determination of heat treatment cycle for cements. Turkish cement manufacturers
13. Optimum heat treatment cycle for cements of different type and composition10.1016/S0008-8846(98)00134-3 ↗
14. Backscattered electron imaging of cement pastes hydrated at different temperatures10.1016/0008-8846(90)90085-C ↗
15. Effect of temperature and aging on the mechanical properties of concrete: Part I. Experimental results10.1016/S0008-8846(02)00744-5 ↗
16. Gallucci E, Xinyu Zhang, Scrivener K. Influence of temperature on the microstructural development of concretes. Septième édition des Journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)2B. Toulouse, France, 19–20 juin 2006.
17. Influence of steam curing on the properties of concretes incorporating metakaolin and silica fume10.1617/s11527-009-9571-2 ↗
18. ACI 517.2R-87 revised. Accelerated curing of concrete at atmospheric pressure-state of the art. Farmington Hills (Michigan): American Concrete Institute; 1992. p. 17
19. Vénuat M. The practice of cements, mortars and concretes, vol. 1. 2nd ed. 1989. p. 215–7.
20. Pore structure of plain cement pastes hydrated at different temperatures10.1016/0008-8846(90)90055-3 ↗
21. Development of microstructures in plain cement pastes hydrated at different temperatures10.1016/0008-8846(91)90044-I ↗
22. Reaction kinetics of Portland cement mortars hydrated at different temperatures10.1016/0008-8846(92)90141-H ↗
23. Asaga K, Ishizaki M, Takahashi S, Konishi K, Tsurumi T, Daimon M. Effect of curing temperature on the hydration of Portland cement compounds. In: Proceedings of the 9th international congress on the chemistry of cement, New Delhi; 1992. p. 181–7.
24. Bogue · 1955
25. Mezghiche · 2005
26. Correlation between initial absorption of the cover concrete, the compressive strength and carbonation depth10.1016/j.conbuildmat.2013.03.074 ↗
27. Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume10.1016/0958-9465(95)00005-W ↗
28. Compressive strength and hydration with age of cement pastes containing dune sand powder10.1016/j.conbuildmat.2010.09.026 ↗