journal article·2009-02Open access

Performance of limestone cement mortars in a high sulfates environment

P. Pipilikaki, M. Katsioti, J.L. Gallias

Abstract

Abstract With the aim of studying the influence of cement composition on resistance in high sulfates environment, standard mortars have been produced using ordinary Portland cement (CEM I – 32.5) and limestone cement with 35% limestone (CEM II/B-LL – 32.5). The pore size distribution of the cement pastes was measured. The mortars were immersed in a 5% Na 2 SO 4 solution at 20 °C for 1.5 years and the caused deterioration was been visually observed at a regular basis. Furthermore, the mortars expansion was being estimated by measuring the change of length. At the end of the experiment the compressive strength of the mortars was measured. The deterioration products of the mortars have been identified by means of X-ray diffraction, optical microscopy and environmental scanning electron microscopy. The limestone cement based mortar presented cracking that started at the age of 6 months and continued throughout the experiment. It also displayed high expansion after 250 days of immersion in a 5% Na 2 SO 4 caused, as proved using the analytical techniques, by the formation of gypsum and ettringite. Concluding, the cement with 35% limestone did not perform as well as ordinary Portland cement under the most aggressive laboratory conditions. Hence, it is obvious that the addition of limestone in the cement leads to a totally different behaviour than Portland cement with respect to the resistance in high sulfates environment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Skalny · 2002
2. Sulfate attack on concrete-research needs
3. Sulfate attack on concrete – a critical review
4. The role of ettringite in external sulfate attack
5. Effect of carcaleous fillers on sulphate resistance of Portland cement
6. Durability of the hydrated limestone-silica fume Portland cement mortars under sulphate attack10.1016/S0008-8846(99)00049-6 ↗
7. Effect of limestone filler on the sulfate resistance of low C3A Portland cement10.1016/S0008-8846(98)00144-6 ↗
8. Thaumasite formation in Portland limestone cement pastes10.1016/S0008-8846(99)00100-3 ↗
9. Aligizaki · 2006
10. A mercury porosimetry study of the evolution of porosity in Portland cement
11. Mindess · 2002
12. An evaluation of the sulfate resistance of cements in a controlled environment10.1016/0008-8846(81)90030-2 ↗
13. Influence of alkali on sulfate resistance in ordinary Portland cement mortars10.1016/0008-8846(85)90122-X ↗
14. Properties of type K expansive cement pure components II. Proposed mechanism of ettringite formation and expansion in unrestrained paste of pure expansive compounds10.1016/0008-8846(74)90043-X ↗
15. Chemical changes in concrete due to ingress of chemical species10.1016/S0008-8846(99)00266-5 ↗
16. Hydration ettringite formation and its expansion mechanism10.1016/0008-8846(81)90032-6 ↗
17. Expansive properties of the mixture C4ASH12+2CS, I. A hypothesis on expansive mechanism10.1016/0008-8846(82)90018-7 ↗
18. Hydration of expansive cements – correlation between the expansion and the formation of hydrates10.1016/0008-8846(84)90105-4 ↗
19. Formation and expansion of ettringite crystals10.1016/0008-8846(94)90092-2 ↗
20. Taylor · 1997
21. Mechanism of expansion associated with ettringite formation10.1016/0008-8846(73)90056-2 ↗
22. Does gypsum formation during sulfate attack on concrete lead to expansion?10.1016/S0008-8846(99)00211-2 ↗
23. Mechanism of sulfate expansion, I. Thermodynamic principles of crystallization pressure, II. Validation of thermodynamic theory10.1016/0008-8846(92)90015-N ↗
24. Sulfate attack on hardened cement paste10.1016/0008-8846(94)90199-6 ↗