Effect of Na3PO4 addition in mortar on steel reinforcement corrosion behavior in 3% NaCl solution
Source abstract
Abstract
Abstract The influence of a phosphate inhibitor on the corrosion behavior of steel reinforcement in mortar immersed in 3% NaCl solution was investigated. For this purpose, characterization methods (SEM, XRD), mechanical (flexural strength and compressive strength), electrochemical and acoustic emission measurements were carried out. It was demonstrated that the addition of phosphate inhibitor induces a slight decrease of the mortar compressive strength but no change of the flexural strength. The electrochemical measurements indicate that the addition of Na 3 PO 4 in mortar leads to an improvement of the steel reinforcement corrosion resistance in chloride solution. It was also confirmed by the acoustic emission technique that the phosphate inhibitor decreases the corrosion rate. Furthermore the visual observation of the mortar corroborates these results. Thus it can be concluded that the addition of this phosphate inhibitor in concrete decreases the chloride ions effect on localized corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Aspects of the electrochemistry of steel in concrete10.1038/297109a0 ↗
2. Some questions on the corrosion of steel in concrete – Part1: When, how and how much steel corrodes10.1007/BF02486005 ↗
3. Reducing the environmental impact of concrete
4. Corrosion of steel reinforcement due to atmospheric pollution10.1016/j.cemconcomp.2004.02.038 ↗
5. Effect of corrosion on bond strength of steel and non-metallic reinforcement
6. Corrosion products of reinforcement in concrete in marine and industrial environments10.1016/j.matchemphys.2008.09.063 ↗
7. Critical chloride corrosion threshold of galvanized reinforcing bars
8. Chloride threshold for rebar corrosion in concrete with addition of silica fume10.1016/j.corsci.2007.07.007 ↗
9. The participation of bound chloride in passive film breakdown on steel in concrete10.1016/S0010-938X(00)00040-8 ↗
10. On the corrosion risk presented by chloride bound in concrete10.1016/S0958-9465(01)00021-X ↗
11. Influence of steel–concrete interface quality on reinforcement corrosion induced by chlorides10.1680/macr.2003.55.2.151 ↗
12. Chloride threshold level for corrosion of steel in concrete10.1016/j.corsci.2007.05.007 ↗
13. The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures10.1016/j.conbuildmat.2007.12.014 ↗
14. Abkar · 2006
15. Chloride threshold level required to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
16. Kropp · 1995
17. Moisture conditioning and transport properties of concrete test specimens10.1007/BF02473450 ↗
18. The application of electrochemical impedance spectroscopy to determine the long-term effectiveness of corrosion inhibitors for steel in concrete10.1016/S0958-9465(01)00062-2 ↗
19. Long-term performance of ZnO as a rebar corrosion inhibitor10.1016/S0958-9465(01)00029-4 ↗
20. Nitrite diffusivity in calcium nitrite-admixed hardened concrete10.1016/S0008-8846(02)00935-3 ↗
21. Effectiveness conditions of sodium monofluorophosphate as a corrosion inhibitor for concrete reinforcements10.1016/j.cemconres.2005.09.006 ↗
22. Detection or quantification analysis of a corrosion inhibitor the sodium monofluorophosphate, in concrete10.1016/j.cemconcomp.2004.11.002 ↗
23. NA2PO3F as inhibitor of corroding reinforcement in carbonated concrete10.1016/S0008-8846(96)85028-9 ↗
24. Phosphate treatment of TMT rebar bundle to avoid early rusting: an option for single step process10.1016/j.surfcoat.2006.02.041 ↗
25. Corrosion inhibitor systems for remedial treatment of reinforced concrete. Part2: Sodium monofluorophosphate10.1016/S0010-938X(02)00248-2 ↗
26. Protection of steel embedded in chloride-containing concrete by means of inhibitors10.1016/S0008-8846(98)00014-3 ↗
27. Transport of a surface-applied corrosion inhibitor in cement paste and concrete10.1016/S0008-8846(02)01067-0 ↗
28. Effect of phosphate based inhibitor on the threshold chloride to initiate steel corrosion in saturated hydroxide solution10.1016/j.conbuildmat.2013.08.054 ↗
29. The hydration of synthetic brownmillerite in presence of low Ca–sulfate content and calcite monitored by quantitative in-situ-XRD and heat flow calorimetry
30. Accelerated biodegradation of cured cement paste by Thiobacillus species under simulation condition10.1016/j.ibiod.2013.10.008 ↗
31. Factors affecting threshold chloride for reinforcement corrosion in concrete10.1016/0008-8846(95)00148-6 ↗
32. A study on chloride-induced depassivation of mild steel in simulated concrete pore solution10.1016/S0008-8846(02)00895-5 ↗
33. Reliability analysis for the existing reinforced concrete pile corrosion of bridge substructure10.1016/j.cemconres.2004.05.010 ↗
34. Impedance measurements on cement paste10.1016/S0008-8846(97)00117-8 ↗
35. Electrochemical impedance and harmonic analysis measurements on steel in concrete
36. Electrochemical characteristics of reinforced concrete corrosion as determined by impedance spectroscopy10.1179/bcj.1992.27.2.113 ↗
37. Use of AC impedance technique in studies on steel in concrete in immersed conditions10.1179/000705981798275002 ↗
38. An A.C. impedance study of steel in concrete10.1007/BF00620572 ↗
39. The presentation of the chloride threshold level for corrosion of steel in concrete10.1016/S0010-938X(97)00009-7 ↗
40. Analysis of the process of crack initiation and evolution in concrete with acoustic emission testing10.1016/j.acme.2013.06.002 ↗
41. Corrosion mechanisms in reinforced concrete by acoustic emission10.1016/j.conbuildmat.2013.02.020 ↗
42. Hydrogen embrittlement of prestressing cables10.1016/j.corsci.2010.02.041 ↗
43. The correlation of acoustic emission with rate of corrosion10.1016/0010-938X(93)90042-F ↗
44. Study and characterization by acoustic emission and electrochemical measurements of concrete deterioration caused by reinforced steel corrosion10.1016/S0963-8695(03)00064-1 ↗
45. Evaluation of stress corrosion cracking phenomenon in an AISI type 316 L stainless steel using acoustic emission technique10.1016/j.corsci.2006.06.007 ↗
46. Detection of SCC on prestressing steel wire by the simultaneous use of electrochemical noise and acoustic emission measurements10.1016/j.electacta.2006.12.085 ↗
47. Detection of stress corrosion cracking of high-strength steel used in prestressed concrete structures by acoustic emission technique10.1016/j.apsusc.2007.09.011 ↗