journal article·2010-10

Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume

Oğuzhan Keleştemur, Bahar Demirel

Publisher page

Abstract

In this study, the mechanical and physical properties of concrete specimens obtained by substituting cement with finely ground pumice (FGP) at proportions of 5%, 10%, 15% and 20% by weight has been investigated, in addition to analyzing the corrosion behavior of reinforcing steels embedded in these specimens. Besides, with the purpose of determining the effect of silica fume (SF) additive over the corrosion of reinforcing steels embedded in concrete with FGP, SF has been entrained to all series with the exception of the control specimen, such that it would replace with cement 10% by weight. Corrosion experiments were conducted in two stages. In the first stage, the corrosion potential of reinforcing steels embedded in the concrete specimens was measured every day for a period of 160 days based on the ASTM C 876 standard. In the second stage, the anodic and cathodic polarization values of the steels were obtained and subsequently the corrosion currents were determined with the aid of cathodic polarization curves. In the study, it was observed that a decrease in the mechanical strength of the specimens and an increase in the corrosion rate of the reinforcing steel had taken place as a result of the FGP addition. However, it was determined that with the addition of SF into concretes supplemented with FGP, the corrosion rate of the reinforcing steel has significantly decreased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Corrosion inhibitor systems for remedial treatment of reinforced concrete. Part 1: Calcium nitrite10.1016/S0010-938X(02)00012-4 ↗
2. Corrosion behavior of tempered dual-phase steel embedded in concrete10.1016/S1674-4799(09)60008-X ↗
3. Effect of admixtures in concrete on the corrosion resistance of steel-reinforced concrete10.1016/S0010-938X(99)00134-1 ↗
4. Corrosion control of steel-reinforced concrete10.1361/105994900770345737 ↗
5. Volcanic ash and pumice as cement additives: pozzolanic, alkali-silica reaction and autoclave expansion characteristics10.1016/j.cemconres.2004.09.025 ↗
6. The effect of the pumice of Elazig region used as pozzolanic additive on the compressive strength of concrete in increasing cure ages
7. Thermoelectric behavior of carbon fiber reinforced lightweight concrete with mineral admixtures10.1016/S1872-5805(08)60009-8 ↗
8. Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete10.1016/S0008-8846(03)00112-1 ↗
9. Pumice based blended cement concretes exposed to marine environment: effects of mix composition and curing conditions10.1016/j.cemconcomp.2007.05.013 ↗
10. Blended cement using volcanic ash and pumice10.1016/S0008-8846(03)00127-3 ↗
11. Performance of volcanic ash and pumice based blended cement concrete in mixed sulfate environment10.1016/j.cemconres.2006.03.010 ↗
12. The influence of mineral admixtures on the short and long-term performance of concrete10.1016/j.buildenv.2006.10.019 ↗
13. Properties of volcanic pumice based cement and lightweight concrete10.1016/j.cemconres.2003.08.004 ↗
14. Effect of volcanic pumice on the corrosion resistance and chloride diffusivity of blended cement mortars10.3151/jact.1.54 ↗
15. Chloride induced corrosion of reinforcement in volcanic ash and pumice based blended concrete10.1016/j.cemconcomp.2004.02.047 ↗
16. The use of pumice as a coating for the reinforcement of steel against corrosion and concrete abrasions10.1016/j.corsci.2008.03.018 ↗
17. Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack10.1016/j.conbuildmat.2007.03.024 ↗
18. Effect of sodium chloride on corrosion of steel in normal concrete and produced by addition of silica fume
19. Influence of silica fume addition on concretes physical properties and on corrosion behaviour of reinforcement bars10.1016/S0958-9465(02)00120-8 ↗
20. Carbonation-induced reinforcement corrosion in silica fume concrete10.1016/j.conbuildmat.2008.08.005 ↗
21. Corrosion performance of medium-strength and silica fume high-strength reinforced concrete in a chloride solution10.1016/j.cemconcomp.2004.02.040 ↗
22. ACI 211.1. Standard practice for selecting proportions for normal, heavyweight and mass concrete. ACI Manual of Concrete Practice; 1993. 38p.
23. ASTM C876-91. Standard test method for half-cell potentials of uncoated reinforcing steel in concrete. Annual Book of ASTM Standards, vol. 4.02. Philadelphia, USA; 1991.
24. Effect of various dual-phase heat treatments on the corrosion behavior of reinforcing steel used in the reinforced concrete structures10.1016/j.conbuildmat.2008.02.001 ↗
25. Effect of oxide compositions in the Portland cement on corrosion behavior of reinforcing steel embedded in concrete
26. Keleştemur O. An investigation on the usability and corrosion resistance of the dual-phase steel in the rein forced concrete structures, Ph.D. thesis, Department of Construction Education, University of Firat; 2008.
27. ASTM C138. Standard test method for density (unit weight), yield and air content (gravimetric) of concrete. Annual Book of ASTM Standards; 1994.
28. ASTM C39. Standard test method for compressive strength of cylindrical concrete specimens. Annual Book of ASTM Standards; 1994.
29. ASTM C597. Standard test method for pulse velocity through concrete. Annual Book of ASTM Standards; 1994.
30. The influence of compaction pores on sorptivity and carbonation of concrete10.1016/j.conbuildmat.2006.02.010 ↗
31. Hydration and carbonation of pozzolanic cements
32. Durability of polymer-modified lightweight aggregate concrete10.1016/S0958-9465(03)00022-2 ↗
33. Influence of different curing conditions on the physical and mechanical properties of concretes with admixtures of silica fume and blast furnace slag10.1016/S0167-577X(03)00362-8 ↗
34. Mechanisms of hydration reactions in high volume fly ash pastes and mortars10.1016/0958-9465(90)90004-H ↗
35. Hydration in high-volume fly ash concrete binders
36. The influence of micro fillers on enhancement of concrete strength10.1016/0008-8846(93)90050-J ↗
37. An estimation of the diffusivity of silica fume concrete10.1016/j.buildenv.2005.11.019 ↗
38. Yalçın H, Koç T. Corrosion of reinforcing steel and its prevent. Gazi University: CMS Ltd.; 2004. p. 270 [in Turkish].