journal article·2014-03

Lightweight masonry block from oil palm kernel shell

Agus Setyo Muntohar, Muhammad Ekhlasur Rahman

Publisher page

Abstract

A large amount of waste produced in the processing of palm oil is one of the main contributors to the environmental problem. This paper presents an experimental study on the development of the shellcrete masonry block that made of oil palm kernel. The study was focused on the physical, compressive strength and flexural strength of shellcrete. The eco-efficiency of the shellcrete was also evaluated by measuring the carbon footprint. The shellcrete was made by mixing the Portland cement (PC), sand, and oil palm kernel shell (PKS). A control specimen made of PC and sand mixture (sandcrete) was also prepared. The specimen size was 220 mm length, 110 mm width and 80 mm in thickness. The maximum strength obtained was 22 MPa by mixing proportion of 1 PC:1 Sand:1 PKS, but the recommended mix proportion of the shellcrete for building materials was 1 PC:1 Sand:2 PKS as an optimum mix design for eco-friendly shellcrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. World Growth. The economic benefit of palm oil to Indonesia. Report palm oil green development campaign. Arlington, USA; 2011. 27p.
2. UN ESCAP. ESCAP report: biomass increasingly important in Indonesia and Thailand. E-news environment and sustainable development, vol. 7. no. 2; 2007. p. 5.
3. Palm kernel shell as a lightweight aggregate in concrete10.1016/0360-1323(90)90002-9 ↗
4. Oil palm shell as a lightweight aggregate for production high strength lightweight concrete10.1016/j.conbuildmat.2010.11.075 ↗
5. Palm kernel shell as a lightweight aggregate for concrete10.1016/0008-8846(88)90026-9 ↗
6. Concrete using waste oil palm shells as aggregate10.1016/S0008-8846(98)00233-6 ↗
7. Concrete from an agricultural waste-oil palm shell (OPS)10.1016/j.buildenv.2003.10.007 ↗
8. A comparative study of concrete properties using coconut shell and palm kernel shell as coarse aggregates10.1016/j.buildenv.2005.01.029 ↗
9. Lightweight concrete made from oil palm shell (OPS): structural bond and durability properties10.1016/j.buildenv.2006.06.013 ↗
10. Stabilised soil and the built environment10.1016/0960-1481(94)90134-1 ↗
11. Towards zero industrial waste: utilisation of brick dust waste in sustainable construction10.1016/j.wasman.2011.03.020 ↗
12. ASTM Standard C150-09. Standard specification for Portland cement, ASTM International, West Conshohocken, Pennsylvania, USA; 2011.
13. ASTM Standard C140-11a. Standard test methods for sampling and testing concrete masonry units and related units, ASTM International, West Conshohocken, Pennsylvania, USA; 2011.
14. ASTM Standard C67-11. Standard test methods for sampling and testing brick and structural clay tile, ASTM International, West Conshohocken, Pennsylvania, USA; 2011.
15. Standard C1018-97, Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM International, West Conshohocken, Pennsylvania, USA; 2003.
16. Influence of cementitious materials and aggregates content on compressive strength of palm kernel shell concrete10.3923/jas.2008.3207.3213 ↗
17. Effect of orientation and compaction method of manufacture on strength properties of sandcrete block10.1016/j.conbuildmat.2004.04.032 ↗
18. ASTM Standard C55-11. Standard specification for concrete building brick, ASTM International, West Conshohocken, Pennsylvania, USA; 2011.
19. Enhancement and prediction of modulus of elasticity of palm kernel shell concrete10.1016/j.matdes.2010.11.035 ↗
20. Engineering properties of concrete with oil palm shell as coarse aggregate10.1016/S0950-0618(01)00030-7 ↗
21. Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone10.1016/S0008-8846(03)00205-9 ↗
22. Effect of curing conditions on the properties of OPS-concrete10.1016/S0360-1323(01)00078-6 ↗
23. Properties of EPS RHA lightweight concrete bricks under different curing conditions10.1016/j.conbuildmat.2011.03.061 ↗
24. Effect of aggregate size and proportion on strength properties of palm kernel shell concrete
25. Gram HE. Durability of natural fibres in concrete, concrete technology and design, vol. 5: Natural fibre-reinforced cement and concrete. London: Blackie and Son Ltd.; 1988. p. 143–72.
26. SNI 03-0349. Concrete brick for wall system. National Standardization Agency of Indonesia, Jakarta; 1989.
27. MS 76, Specifications for bricks and blocks of fired brick-earth clay or shale: Part 2: Metric units, Department of Standards Malaysia; 1972.
28. Oil palm shell lightweight concrete as a ductile material10.1016/j.matdes.2011.12.003 ↗
29. Hammond GP, Jones CI. Embodied carbon: Inventory of Carbon and Energy (ICE), BSRIA BG 10/2011; 2006.
30. Study of two concrete mix-design strategies to reach carbon mitigation objectives10.1016/j.cemconcomp.2009.04.001 ↗
31. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗