journal article·2016-05

Using neutron radiography to assess water absorption in air entrained mortar

Wenting Li, Mohammad Pour-Ghaz, Pavel Trtik, Mateusz Wyrzykowski, Beat Münch, Pietro Lura, Peter Vontobel, Eberhard Lehmann, W. Jason Weiss

Publisher page

Abstract

Abstract Concrete highway and airport pavements are designed to be long lasting; however, some concrete pavements have shown premature deterioration at the cracks and joints. It has been hypothesized that one cause of this deterioration is associated with fluid ingress, especially in cases where those fluids contain deicing salts. This paper examines fluid ingress in mortar using a cross-sectional geometry that is similar to a typical concrete pavement joint. Time-dependent and spatial aspects of fluid ingress are examined using neutron radiography (NR), which was performed using the thermal neutron radiography station at the neutron spallation source at the Paul Scherrer Institut (PSI). Specifically, this paper examines the role of the initial relative humidity (or degree of saturation) and air content on the fluid ingress. The work indicates that the initial fluid ingress reaches a specific degree of saturation relatively rapidly, where the large capillary and gel pores appear to be filled in (commonly referred to as the nick point in sorption tests) and the entrapped and entrained air pores fill in more slowly over time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Geophysical Methods and Applications · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Jones · 2013
2. Can soy methyl esters reduce fluid transport and improve the durability of concrete?10.3141/2113-03 ↗
3. Water absorption and critical degree of saturation relating to freeze-thaw damage in concrete pavement joints10.1061/(ASCE)MT.1943-5533.0000383 ↗
4. Measuring freeze and thaw damage in mortars containing deicing salt using a low-temperature longitudinal guarded comparative calorimeter and acoustic emission
5. The effect of damage on moisture transport in concrete10.1061/(ASCE)MT.1943-5533.0001211 ↗
6. Crystallization in pores10.1016/S0008-8846(99)00002-2 ↗
7. Petrographic evidence of calcium oxychloride formation in mortars exposed to magnesium chloride solution10.1016/j.cemconres.2006.05.022 ↗
8. Acoustic emission and low temperature calorimetry study of freeze and thaw behavior in cementitious materials exposed to NaCl salt
9. The influence of calcium chloride deicing salt on phase changes and damage development in cementitious materials10.1016/j.cemconcomp.2015.09.006 ↗
10. The critical degree of saturation method of assessing the freeze/thaw resistance of concrete and the international cooperative test of the critical degree of saturation method of assessing the freeze/thaw resistance of concrete
11. Performance of conventional portland cement and calcium silicate based carbonated cementitious systems during freezing and thawing in the presence of calcium chloride deicing salt
12. Hydrogen distribution measurements by neutrons10.1016/j.apradiso.2004.03.075 ↗
13. Properties of the radiography facility NEUTRA at SINQ and its potential for use as European reference facility
14. On the determination by neutron radiography of the thickness of the carbonated layer of concrete based upon changes in water content10.1016/0008-8846(72)90114-7 ↗
15. The application of neutron radiography to the study of microcracking in concrete
16. Relationship between liquid sorptivity and capillarity in concrete10.1016/S0008-8846(03)00070-X ↗
17. Neutron radiography, a powerful method to determine time dependent moisture distributions in concrete10.1016/j.nucengdes.2011.02.031 ↗
18. Neutron imaging of water penetration into cracked steel reinforced concrete10.1016/j.physb.2010.01.065 ↗
19. Quantification of water penetration into concrete through cracks by neutron radiography10.1016/j.nima.2009.01.206 ↗
20. Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography10.1016/j.cemconres.2012.05.005 ↗
21. P. Trtik, B. Münch, W.J. Weiss, G. Herth, A. Kaestner, E. Lehmann, et al., Neutron tomography investigation of water release from superabsorbent polymers in cement paste. In: Proc. Int. RILEM Conf. on Material Science (MatSci), Aachen, Germany, September 6–10, 2010, volume III, PRO 77, 175–185.
22. Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography10.1016/j.nima.2011.02.012 ↗
23. Electrical resistance tomography to monitor unsaturated moisture flow in cementitious materials10.1016/j.cemconres.2014.11.007 ↗
24. Plastic shrinkage of mortars with shrinkage reducing admixture and lightweight aggregates studied by neutron tomography10.1016/j.cemconres.2015.03.013 ↗
25. ASTM Standard C192-12a, Standard practice for making and curing concrete test specimens in the laboratory, ASTM International, 2006.
26. ASTM Standard C1585-04, Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes, ASTM International, 2004.
27. Can soy methyl ester (SME) improve concrete pavement joint durability?10.3141/2290-08 ↗
28. Effect of specimen conditioning on the water absorption of concrete10.1016/j.cemconcomp.2011.05.007 ↗
29. J. Castro, P. Kompare, P. Poursaee, T. Nantung, J. Weiss, Portland cement concrete pavement performance relative to permeability, JTRP Report SPR-3093, Indiana Department of Transportation, West Lafayette, Indiana (IN), 2010.10.5703/1288284314244 ↗
30. Wetting and drying of concrete using aqueous solutions containing deicing salts10.1016/j.cemconcomp.2011.02.009 ↗
31. The Influence of pore solution properties on drying in cementitious materials10.1111/jace.12604 ↗
32. Powers · 1958 · 90
33. G. Fagerlund, The Long-Time Water Absorption in the Air-Pore Structure of Concrete, Report TVBM-3051, Division of Building Technology, Lund Institute of Technology, Lund, Sweden, 1993.
34. The required air content of concrete
35. G. Fagerlund, A service life model for international frost damage in concrete, Report TVBM-3119, Division of Building Technology, Lund Institute of Technology, Lund, Sweden, 2004.
36. Comparison of the pore volume in concrete as determined using ASTM C642 and vacuum saturation
37. Water in porous materials
38. Capillary transport in mortars and concrete10.1016/S0008-8846(97)00052-5 ↗
39. Capillary absorption in concrete and the Lucas–Washburn equation10.1016/j.cemconcomp.2009.10.005 ↗
40. Using neutron radiography to quantify water absorption and degree of saturation in cement based mortars10.1016/j.phpro.2015.07.077 ↗
41. Methods of scattering corrections for quantitative neutron radiography10.1016/j.nima.2005.01.161 ↗
42. Properties of the radiography facility NEUTRA at SINQ and its potential for use as European reference facility
43. R.K. Hassanein correction methods for the quantitative evaluation of thermal neutron tomography (Ph.D. thesis), ETH Zurich, Zurich, 2006.
44. Visualization and quantification of liquid water transport in softwood by means of neutron radiography10.1016/j.ijheatmasstransfer.2012.06.045 ↗
45. Numerical and experimental assessment of unsaturated fluid transport in saw-cut (notched) concrete elements
46. M. Pour-Ghaz, F. Rajabipour, J. Couch, J. Weiss, Modeling fluid transport in cementitious systems with crack-like (notch) geometries, International RILEM Workshop on Concrete Durability and Service Life Planning, Haifa, Israel, RILEM Publications S.A.R.L., 2009, 71–78.