Ductile crack initiation and propagation of structural steels under cyclic combined shear and normal stress loading
Source abstract
Abstract
Abstract Ductile fracture preceding brittle fracture was observed in welded steel moment resisting frames during past strong earthquakes. Studies on ductile fracture were mainly focused on steels under normal stress loading, while seldom for those under combined shear and normal stress loading, which is also a common stress state for structural components, e.g., fillet welded joints and partial penetration welded joints. Ductile fracture of structural steels under combined shear and tension has been investigated through monotonic experiments in a previous study, and this paper aims to clarify the corresponding cyclic loading cases. Two series of specimens are manufactured, where they are respectively under pure shear, combined shear and normal stress loading. Meanwhile, a coupled fracture model considering material deterioration is proposed to simulate both ductile crack initiation and propagation, where a method to simply obtain the material parameter of the propagation rule is also proposed and validated through comparison between experimental and numerical results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Lessons from damage to steel buildings during the Northridge earthquake10.1016/S0141-0296(97)00032-1 ↗
2. AIJ · 1995
3. Performance of steel bridges during the 1995 Hyogo-ken Nanbu (Kobe, Japan) earthquake10.1139/l96-883 ↗
4. Ductile crack as trigger of brittle fracture in steel10.1061/(ASCE)0733-9445(1997)123:6(729) ↗
5. Extremely low cycle fatigue prediction of steel beam-to-column connection by using a micro-mechanics based fracture model10.1016/j.ijfatigue.2012.10.006 ↗
6. Cyclic testing of steel moment connections rehabilitated with RBS or welded haunch10.1061/(ASCE)0733-9445(2000)126:1(57) ↗
7. Experimental evaluation of plate-reinforced steel moment-resisting connections10.1061/(ASCE)0733-9445(2002)128:4(483) ↗
8. Inelastic cyclic testing of welded unreinforced moment connections10.1061/(ASCE)0733-9445(2002)128:4(429) ↗
9. Parametric tests on unreinforced steel moment connections10.1061/(ASCE)0733-9445(2000)126:1(40) ↗
10. Ductile fracture models and their potential in local approach of fracture10.1016/0029-5493(87)90234-2 ↗
11. Panontin · 1995
12. On the ductile enlargement of voids in triaxial stress fields10.1016/0022-5096(69)90033-7 ↗
13. Gurson · 1975
14. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
15. On localization in ductile materials containing spherical voids10.1007/BF00015686 ↗
16. Simulation of ductile fracture of circular hollow section joints using the Gurson model10.1061/(ASCE)0733-9445(2005)131:5(768) ↗
17. A micromechanical model for ductile fracture prediction in ASTM A992 steels10.1016/j.engfracmech.2013.02.021 ↗
18. Cyclic void growth model to assess ductile fracture initiation in structural steels due to ultra low cycle fatigue10.1061/(ASCE)0733-9399(2007)133:6(701) ↗
19. Ductile fracture simulation of structural steels under monotonic tension10.1061/(ASCE)ST.1943-541X.0000944 ↗
20. Experimental and numerical study of postbuckling ductile fracture of heat-treated SHS stub columns10.1061/(ASCE)ST.1943-541X.0001056 ↗
21. Fracture behaviour of axisymmetric bars under high triaxial stress and large strain cyclic loading10.1111/j.1460-2695.1992.tb00028.x ↗
22. A micromechanical cyclic void growth model for ultra-low cycle fatigue10.1016/j.ijfatigue.2014.08.010 ↗
23. Fracture in steel bridge piers due to earthquakes
24. Experimental investigation and numerical simulation on fatigue crack behavior of bridge steel WNQ570 base metal and butt weld10.1016/j.conbuildmat.2014.12.063 ↗
25. Numerical and experimental analyses of the plasticity-induced fatigue crack growth in high-strength steels10.1016/j.conbuildmat.2011.04.025 ↗
26. Experimental study on cracking of thick-walled welded beam-column connections with incomplete penetration in steel bridge piers
27. Hysteretic model of stiffened shear panel dampers10.1061/(ASCE)0733-9445(2006)132:3(478) ↗
28. Numerical simulation of large deformation in shear panel dampers using smoothed particle hydrodynamics10.1016/j.engstruct.2012.09.008 ↗
29. Cyclic shear behaviour of steel box girders: experiment and analysis10.1002/eqe.200 ↗
30. A triaxiality and Lode parameter dependent ductile fracture criterion10.1016/j.engfracmech.2014.07.010 ↗
31. Constitutive modeling of void shearing effect in ductile fracture of porous materials10.1016/j.engfracmech.2007.07.022 ↗
32. Prediction of the fracture performance of defect-free steel bars for civil engineering applications using finite element simulation10.1016/j.conbuildmat.2012.11.089 ↗
33. L.-J. Jia, H.B. Ge, K. Shinohara, H. Kato, Experimental and numerical study on ductile fracture of structural steels under combined shear and tension, J. Bridge Eng. (ASCE), in press.
34. Ductile fracture model for structural steel under cyclic large strain loading10.1016/j.jcsr.2014.12.002 ↗
35. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
36. 2005
37. Testing and analysis of X39CrMo17-1 steel properties10.1016/j.conbuildmat.2013.02.080 ↗
38. JIS G3101 · 2010
39. JIS G3106 · 2008
40. WES 2808 · 2003
41. Prediction of cyclic behaviors of mild steel at large plastic strain using coupon test results10.1061/(ASCE)ST.1943-541X.0000848 ↗
42. Prediction of cyclic large plasticity for prestrained structural steel using only tensile coupon tests10.1007/s11709-013-0219-5 ↗
43. Modification of the Gurson Model for shear failure10.1016/j.euromechsol.2007.08.002 ↗
44. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
45. Tension and shear cracking during indentation of ductile materials by opposed wedges10.1016/j.engfracmech.2012.06.014 ↗
46. Rupture mechanisms in combined tension and shear—Experiments10.1016/j.ijsolstr.2006.09.031 ↗
47. Rupture mechanisms in combined tension and shear—micromechanics10.1016/j.ijsolstr.2007.01.010 ↗
48. Versuche über den Einfluß der mittleren Hauptspannung auf das Fließen der Metalle Eisen, Kupfer und Nickel
49. Chen · 2007