journal article·2016-06

Influences of exposure condition and sulfate salt type on deterioration of paste with and without fly ash

Chuansheng Xiong, Linhua Jiang, Yi Xu, Zijian Song, Hongqiang Chu, Qingxiang Guo

Publisher page

Abstract

Abstract The aim of this study is to investigate the influences of exposure condition and sulfate salt type on the deterioration features and damage mechanisms of paste exposed to external sulfate attack. Cement pastes with w/b ratios of 0.35, 0.45 and 0.55, and fly ash pastes with the w/b ratio of 0.45 were exposed to sodium sulfate solution and magnesium sulfate solution with different exposure conditions. Four exposure conditions, referenced as CI (continuous immersion), DWCI (dry-wet cycle immersion), PIAWL (partial immersion above the water level) and PIUWL (partial immersion under the water level), were designed for the exposure tests. The compressive strength, mass variation and Vickers hardness (VH) profiles of specimens were measured to evaluate the damage of the paste specimens. Scanning Electron Microscope (SEM), Energy Dispersive Spectrometer (EDS) and X-ray diffraction (XRD) were used to analyze the degradation mechanisms. As the results shown, pastes exposed to external sulfate attack with different exposure conditions suffered from different damage mechanisms, including chemical sulfate attack and physical sulfate attack. The highest damage was observed on the specimens with the PIAWL condition when they were exposed to sodium sulfate solution. While in the cases of magnesium sulfate attack, the highest damage was found on the specimens with the DWCI condition. For chemical sulfate attack, a suitable content of fly ash in pastes could increase the resistance to sulfate attack, while the addition of fly ash might accelerate the damage when the specimens suffered from physical sulfate attack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Standards for evaluating the susceptibility of cement-based materials to external sulfate attack
2. Multi-parameter study of external sulfate attack in blended cement materials10.1016/j.conbuildmat.2009.08.009 ↗
3. Sulfate attack expansion mechanisms10.1016/j.cemconres.2013.07.005 ↗
4. Mechanism of expansion of mortars immersed in sodium sulfate solutions10.1016/j.cemconres.2012.10.001 ↗
5. Pessimum effect of externally applied chlorides on expansion due to delayed ettringite formation-proposed mechanism10.1016/j.cemconres.2005.11.020 ↗
6. Durability of concrete exposed to leaching and external sulphate attacks10.1016/j.cemconres.2009.07.021 ↗
7. New procedure to investigate external sulphate attack on cementitious materials10.1016/j.cemconcomp.2011.11.010 ↗
8. Mechanism of sulfate attack: a fresh look part 1: summary of experimental results10.1016/S0008-8846(02)00724-X ↗
9. The confused world of sulfate attack on concrete10.1016/j.cemconres.2004.04.004 ↗
10. Skalny · 2001
11. Does concrete suffer sulfate salt weathering?10.1016/j.conbuildmat.2014.06.011 ↗
12. Salt weathering in residential concrete foundations exposed to sulfate-bearing ground10.3151/jact.8.121 ↗
13. Salt weathering distress on concrete exposed to sodium sulfate environment
14. ASTM C1012 · 1995
15. ASTM C452 · 1995
16. GB2402-1981 · 1981
17. GB/T 749-2001 · 2001
18. Investigation of concrete exposed to dual sulfate attack10.1016/j.cemconres.2014.06.002 ↗
19. Micro-analysis of “salt weathering” on cement paste10.1016/j.cemconcomp.2010.10.010 ↗
20. Mechanism of concrete deterioration due to salt crystallization10.1016/j.matchar.2004.08.013 ↗
21. Stress from crystallization of salt10.1016/j.cemconres.2003.12.034 ↗
22. Durability of self-consolidating concrete to sulfate attack under combined cyclic environments and flexural loading10.1016/j.cemconres.2008.12.003 ↗
23. Resistance of plain and blended cement mortars exposed to severe sulfate attacks10.1016/j.conbuildmat.2010.11.106 ↗
24. Interaction between sulfate and chloride solution attack of concretes with and without fly ash10.1016/j.cemconres.2007.02.016 ↗
25. Salt weathering of concrete by sodium carbonate and sodium chloride
26. GB/T 50081-2002 · 2003
27. The use of tension testing to investigate the effect of W/C ratio and cement type on the resistance of concrete to sulfate attack10.1016/j.cemconres.2003.08.010 ↗
28. Mechanism of concrete deterioration due to salt crystallization10.1016/j.matchar.2004.08.013 ↗
29. Magnesium-sodium sulfate attack in plain and blended cements10.1061/(ASCE)0899-1561(1994)6:2(201) ↗
30. Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements
31. Predicting the calcium leaching behavior of cement pastes in aggressive environments10.1016/j.conbuildmat.2011.10.031 ↗
32. Influence of cation type on deterioration process of cement paste in sulfate environment10.1016/j.conbuildmat.2014.08.042 ↗
33. Chemo-mechanical coupling behaviour of leached concrete part I: experimental results10.1016/j.nucengdes.2007.02.013 ↗
34. Attack on plain and blended cements exposed to aggressive sulfate environments10.1016/S0958-9465(01)00082-8 ↗
35. The mechanism of formation and transformation of ettringite10.1007/BF02840908 ↗
36. Thermodynamic investigation of the CaO-Al2O3-CaSO4·2H2O system at 25°C and the influence of Na2O10.1016/0008-8846(93)90153-Z ↗
37. Attack on plain and blended cements exposed to aggressive sulfate environments10.1016/S0958-9465(01)00082-8 ↗