Effect of fatty acid soap on microstructure of lime-cement mortar
Source abstract
Abstract
Abstract Different additives based on Na oleate, Na oleate – Ca stearate and Al stearate were used in two different quantities (0.15 %w/w and 0.30 %w/w of the solid amount) to enhance the waterproofing effect of mortars. From capillary water absorption test, Na oleate showed the better performance with a reduction of water absorbed of 86% in comparison with the reference mortar. The microstructure showed the presence of microcavities ranging between 0.01 mm and 0.2 mm, due to air bubbles trapped during the mortar preparation for the surfactant effect of Na oleate. The presence of a higher amount of pores (210 mm3/g vs. 175 mm3/g) was confirmed by the Hg porosimetry. Moreover a reduction of the carbonation rate for the presence of additive was verified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Conservation Techniques and Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Amoroso · 1983
2. Scanning electron microscopy to establish the marble alteration mechanism in the Alhambra of granada (Spain)
3. Simple evaluator of building envelope moisture condensation according to an European standard10.1016/S0360-1323(02)00060-4 ↗
4. Frost resistance and related structural and chemical material properties10.1016/0254-0584(85)90067-7 ↗
5. Hydrophobic treatment of concrete10.1016/S0950-0618(97)00046-9 ↗
6. Effect of hydrophobization treatment on the hydration of repair Roman cement mortars10.1016/j.conbuildmat.2012.05.002 ↗
7. Effects of hydrophobic treatment on thermophysical properties of lightweight mortars10.1016/j.expthermflusci.2004.12.006 ↗
8. Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives10.1016/j.conbuildmat.2009.05.002 ↗
9. Stabilization of sodium oleate as calcium oleate in cement-based mortars made with limestone fillers10.1016/j.conbuildmat.2010.06.079 ↗
10. Hydrophobic lime based mortars with linseed oil: characterization and durability assessment10.1016/j.cemconres.2014.03.011 ↗
11. Effectiveness and durability evaluation of rendering mortars made with metallic soaps and powdered silicone10.1016/j.conbuildmat.2007.10.001 ↗
12. Effect of water repellent admixtures of the behavior of aerial lime-base mortars10.1016/j.cemconres.2009.07.026 ↗
13. Liquid-like H2O adsorption layers to catalyse the Ca(OH)2/CO2 solid–gas reaction and to form a non-protective solid product layer at 20°C10.1016/S0955-2219(99)00185-5 ↗
14. UNI EN 15801:2010 · 2010
15. NORMAL 29/88 Measurement of drying index.10.1016/0007-6813(86)90094-7 ↗
16. UNI EN 1015-7 · 2000
17. Stoker · 2015
18. Kingery · 1975
19. Lowell · 1979
20. The role of pore structure in the catalytic behaviour of unaged and aged silica-alumina catalyst10.1002/cjce.5450510409 ↗
21. Bear · 1972