Experimental study of a pull-out test of corroded steel and concrete using the acoustic emission monitoring method
Source abstract
Abstract
Abstract Based on an acoustic emission (AE) test system, pull-out tests were conducted to study the bond behavior between corroded steel bars and concrete with different corrosion degrees. The characteristics of the AE signal for the pull-out specimens were analyzed. The results showed that the AE location was consistent with the actual crack development. The characteristics of the AE signal reflected the bond behavior, the failure process and the characteristics of the specimens under different degrees of corrosion. Two critical states of crack development and the process of splitting failure slip were obtained. As a result, the stress distribution tends to be uniform along the steel bar with increasing degree of corrosion, and the peak value gradually shifted toward the free end.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Chloride-induced corrosion of steel reinforcement–mechanical performance and pit depth analysis10.1016/j.conbuildmat.2012.07.087 ↗
2. Green · 1969
3. M.R. James, Fundamentals of acoustic emission and application of an NDT tool for FRP[C]//34th Annual Technical Conference. Reinforced Plastics/Composite Institute, The Society of the Plastics Industry Inc, section. 1979, 1–3.
4. Evaluation of the repair on multiple leaf stone masonry by acoustic emission10.1617/s11527-007-9316-z ↗
5. Use of acoustic emission and X-ray computed tomography for damage evaluation of freeze-thawed concrete10.1016/j.conbuildmat.2010.05.005 ↗
6. Hongguang · 2004
7. Acoustic emissions at high and low frequencies during compression tests in brittle materials10.1111/j.1475-1305.2010.00745.x ↗
8. Critical defect size distributions in concrete structures detected by the acoustic emission technique10.1007/s11012-007-9101-7 ↗
9. Predicting the loss of stability of loaded structural elements using the method of acoustic emission10.1134/S1063785007010178 ↗
10. Quantitative damage estimation of concrete by acoustic emission10.1016/S0950-0618(00)00071-4 ↗
11. Quantitative damage evaluation of structural concrete by a compression test based on AE rate process analysis10.1016/j.conbuildmat.2003.10.009 ↗
12. The setting of acoustic emission detecting parameters in concrete structure
13. Investigation of effects of aggregate size on the fracture behavior of high performance concrete by acoustic emission10.1016/j.conbuildmat.2006.05.030 ↗
14. Setting the common detecting parameters of AE in NDT of concrete
15. The fitting method of the smooth bond stress in the bond-slip test