Experimental investigation of reinforced concrete beams with spiral reinforcement in shear
Source abstract
Abstract
Abstract The use of continuous rectangular spiral shear reinforcement as transverse reinforcement is experimentally investigated by testing 28 reinforced concrete beams in a static four-point bending setup. In this paper two shear span-to-depth ratios (2.5 and 3.0), three spacing (125, 150 and 200 mm) and five inclination angle of stirrups (62, 70, 75, 80 and 85°) are adopted. The behavior of the shear-critical beams is studied through monitoring the load–deflection curves, ultimate load values, vertical deflections measurements and crack propagation during static tests. The experimental shear capacity of the beams are compared with analytical values from the design shear formulas of ACI 318M-14 code. Test results clearly indicate that using rectangular spiral shear reinforcement improved the shear capacity and ductility of beams compared with traditional individual closed stirrup beams. Furthermore the results showed that the optimum inclination angle for spiral stirrups is 80°. Accordingly, using rectangular spiral shear reinforcement is recommended because it improves the shear capacity and ductility in beams and can reduce the total cost due to labor costs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. ACI Committee 318 · 2014
2. CEN. Eurocode 2. Design of concrete structures – Part 1–1: general rules and rules for buildings. EN 1992-1-1, 2004.
3. Standard specifications for concrete structures
4. Park · 1975
5. Axial behavior of high-strength concrete confined with multiple spirals10.1016/j.engstruct.2013.12.019 ↗
6. Axial strength and ductility of square composite columns with two interlocking spirals10.1016/j.jcsr.2013.07.021 ↗
7. Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns10.1016/j.engstruct.2011.10.002 ↗
8. Effect of reinforcement stiffeners on square concrete-filled steel tubular columns subjected to axial compressive load10.1016/j.tws.2014.04.009 ↗
9. Static behaviors of reinforcement-stiffened square concrete-filled steel tubular columns10.1016/j.tws.2012.04.015 ↗
10. Effect of spiral reinforcement on flexural shear–torsional seismic behavior of reinforced concrete circular bridge columns10.12989/sem.2009.33.2.137 ↗
11. Seismic performance of circular RC columns subjected to axial force, bending, and torsion with low and moderate shear10.1016/j.engstruct.2009.08.014 ↗
12. New configuration of transverse reinforcement for improved seismic resistance of rectangular RC columns: Concept and axial compressive behavior10.1016/j.engstruct.2015.12.014 ↗
13. Cyclic load behavior of RC beam-column sub assemblages of modern structures
14. Effectiveness of rectangular spiral shear reinforcement on infilled R/C frames under cyclic loading10.1080/13632469.2011.560361 ↗
15. Comparative study of square stirrup-confined concrete-filled steel tubular stub columns under axial loading10.1016/j.tws.2015.10.018 ↗
16. Pitch spacing effect on the axial compressive behaviour of spirally reinforced concrete-filled steel tube (SRCFT)10.1016/j.tws.2015.12.011 ↗
17. Mechanical performance of stirrup-confined concrete-filled steel tubular stub columns under axial loading10.1016/j.jcsr.2014.03.005 ↗
18. Axial compressive behavior of square composite columns confined by multiple spirals10.1016/j.jcsr.2014.09.006 ↗
19. Shear behavior of continuous reinforced concrete T-beams using wire rope as internal shear reinforcement10.1016/j.conbuildmat.2010.06.093 ↗
20. Effectiveness of spirally shaped stirrups in reinforced concrete beams10.1016/j.engstruct.2013.03.032 ↗
21. Shear tests of reinforced concrete beams with continuous rectangular spiral reinforcement10.1016/j.conbuildmat.2013.04.023 ↗
22. Experimental investigation of RC beams with rectangular spiral reinforcement in torsion10.1016/j.engstruct.2013.05.003 ↗