Flexural response of SFRC under impact loading
Source abstract
Abstract
Abstract The research presented in this paper deals with the impact behavior of steel fiber-reinforced concrete (SFRC). An experimental campaign on unnotched prismatic specimens has been carried out, covering three types of steel fibers (smooth, hooked and prismatic), two volumetric contents (0.5 and 1%), and companion unreinforced plain concrete specimens. Impact tests have been performed with an instrumented drop weight testing machine recently installed at the Technical University of Madrid (UPM), Spain. According to experimental results, the peak strength and fracture energy of tested SFRC mixes are strain-rate dependent, showing dynamic increase factors (DIF) well larger than 1. On the one hand, the analysis has shown that the DIF of the peak bending strength of SFRC reinforced with smooth and prismatic fibers is higher than the DIF of the tensile strength of plain concrete and increases with the fiber content. SFRC reinforced with hooked fibers presented higher DIF with 0.5% fiber content than with 1.0%. The influence of rate-dependent size effect in the former results is discussed in the paper. On the other hand, the DIF of the fracture energy showed the highest rate sensitivity for plain concrete specimens and decreases with the addition of fibers due to the rate dependence of the mechanisms involved in the fiber-matrix interaction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Effects of shear resisting mechanisms on impact behavior of reinforced concrete beams
2. Impact behavior of shear-failure type RC beams without shear rebar10.1016/S0734-743X(01)00149-X ↗
3. American Concrete Institute · 2011
4. L.J. Malvar, J.E. Crawford, Dynamic increase factors for concrete. 28th DDESB Seminar, Orlando, FL, 1998, 1–11.
5. Review of strain rate effects for concrete in tension
6. FIB. Model Code for concrete structures 2010, 2013.10.1002/9783433604090 ↗
7. Compressive behaviour of concrete at high strain rates10.1007/BF02472016 ↗
8. Concrete behaviour in direct tension tests at high strain rates10.1680/macr.12.00175 ↗
9. Spall experiments for the measurement of the tensile strength and fracture energy of concrete at high strain rates10.1016/j.ijimpeng.2005.01.010 ↗
10. O. Millon, W. Riedel, K. Thoma, E. Fehling, M. Nöldgen, Fiber-reinforced ultra-high performance concrete under tensile loads, in: 9th Int. Conf. on the Mechanical Behaviour of Materials under Dynamic Loading, 2009, 671–677.10.1051/dymat/2009095 ↗
11. Tracción en materiales cerámicos a altas velocidades de deformación
12. Properties of steel fiber reinforced concrete subjected to impact loading
13. Fracture behaviour of high-strength concrete at wide range of loading rates10.1016/j.ijimpeng.2009.04.007 ↗
14. Fracture behaviour of steel fibre-reinforced concrete at a wide range of loading rates10.1016/j.ijimpeng.2014.04.009 ↗
15. A novel drop weight impact setup for testing reinforced concrete beams
16. High strain rate effects on direct tensile behaviour of high performance fiber reinforced cementitious composites10.1016/j.cemconcomp.2013.10.005 ↗
17. Using the split Hopkinson pressure bar to investigate the dynamic behaviour of SFRC10.1680/macr.2003.55.2.183 ↗
18. C. Zanuy, O. Millon, A. Stolz, Mechanisms of bond between fibres and matrix in UHPFRC subjected to dynamic loading, in: 4th Int. Symp. on Ultra-High Performance Concrete and High Performance Construction Materials, Kassel, Germany, 2016, 115–116.
19. Analytical model for the pullout behavior of straight and hooked-end steel fibers
20. A cohesive interface model for the pullout of inclined steel fibers in cementitious matrix10.3151/jact.5.247 ↗
21. A.E. Naaman, Strain hardening and deflection hardening fiber reinforced cement composites, High Performance Fiber Reinforced Cement Composites (HPFRCC4), Ann Arbor, USA 2003, 95–113.10.1007/BF02479507 ↗
22. Strain-rate effects in fibre-reinforced concrete subjected to impact and impulsive loading10.1016/0010-4361(82)90052-0 ↗
23. Impact properties of steel fibre reinforced concrete in bending10.1016/0262-5075(83)90064-7 ↗
24. The fracture toughness of concrete under impact loading10.1016/0008-8846(87)90106-2 ↗
25. Impact response of ultra-high-strength fiber-reinforced cement composite
26. L. Zhang, S. Mindess, The flexural response of high strength FRC under impact, PROTECT 2007, Whistler, Canada, 2007, 1–10.
27. R. John, S.P. Shah, Constitutive modeling of concrete under impact loading, SMiRT-9 Post Conference-Seminar on Impact, Lausanne, Switzerland 1987, 7–37.
28. Impact testing of concrete using a drop-weight impact machine
29. Impact resistance of fiber reinforced concrete at subnormal temperatures10.1016/S0958-9465(98)00015-8 ↗
30. D.J. Kim, Strain rate effect on high performance fiber reinforced cementitious composites using slip hardening high strength deformed steel fibers, PhD Thesis University of Michigan, 2009.
31. Review of static and dynamic properties of steel reinforcing bars
32. Bazant · 1998
33. Experimental study of size effect on static/dynamic flexural-tensile strength of three-graded concrete10.1166/asl.2011.1586 ↗
34. Dynamic size effect in normal- and high-strength concrete cylinders
35. Size effects and the dynamic response of plain concrete10.1061/(ASCE)0899-1561(2006)18:4(485) ↗