journal article·2017-08

The rheological properties and mechanisms of cement asphalt emulsion paste with different charge types of emulsion

Jian Ouyang, Hongyan Li, Baoguo Han

Publisher page

Abstract

Abstract Cement asphalt emulsion (CA) composites are very promising materials suitable for many applications. The rheological properties of CA paste, which can reflect the workability of CA paste and the stability and demulsifying behavior of asphalt emulsion, have attracted much attention. However, the rheological properties of CA paste with different charge types of emulsion (i.e. cationic and anionic) as well as the influencing mechanisms are not clearly understood. In this paper, the rheological properties of CA paste with cationic and anionic emulsion were studied, and the potential influencing factors were analyzed, i.e. pH value, emulsifier, and the adsorption behavior between asphalt droplets and solid particles. Results indicate that the apparent viscosity of CA paste at high shear rate is mainly related to emulsifier type. However, emulsifier type and pH value are not the primary factors of the yield stress of CA paste. The yield stress of CA paste is closely related to emulsion charge types. CA paste with cationic emulsion has a higher yield stress than CA paste with anionic emulsion. This is because that the cationic asphalt droplets has a much stronger adsorbing ability on solid particles surface compared with anionic asphalt droplets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Grouting, Rheology, and Soil Mechanics · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A study on the mechanical behaviour of cement–bitumen treated materials10.1016/j.conbuildmat.2010.07.007 ↗
2. Effect of cement on emulsified asphalt mixtures10.1007/s11665-007-9095-2 ↗
3. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
4. Experimental study of cement-asphalt emulsion composite10.1016/S0008-8846(98)00038-6 ↗
5. Feasibility study of asphalt-modified mortars using asphalt emulsion10.1016/j.conbuildmat.2005.01.027 ↗
6. Application of anionic asphalt emulsion as an admixture for concrete10.1016/j.conbuildmat.2012.11.110 ↗
7. Analysis of dynamic behavior for slab track of high-speed railway based on vehicle and track elements10.1061/(ASCE)TE.1943-5436.0000207 ↗
8. A novel method to evaluate the setting process of cement and asphalt emulsion in CA mortar10.1617/s11527-007-9270-9 ↗
9. Recent development in slab track
10. Characterising the influence of bitumen emulsion on asphalt mixture performance10.1617/s11527-014-0302-y ↗
11. Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance10.1617/s11527-012-9971-6 ↗
12. Effect of compaction energy on physical and mechanical performance of bitumen emulsion mortar10.1617/s11527-014-0488-z ↗
13. Effects on engineering properties of cement-treated road base with slow setting bitumen emulsion
14. Effects of strain rate and confining pressure on compressive behavior of cement asphalt mortar10.1016/j.matdes.2014.10.010 ↗
15. Influences of temperature on mechanical properties of cement asphalt mortars10.1617/s11527-013-0060-2 ↗
16. Effect of temperature and pressure on the degradation of cement asphalt mortar exposed to water10.1016/j.conbuildmat.2012.03.002 ↗
17. Study of the rheological properties of fresh cement emulsified asphalt paste10.1016/j.conbuildmat.2014.05.023 ↗
18. Rheology of fresh cement asphalt emulsion pastes10.1016/j.conbuildmat.2015.01.078 ↗
19. Factors influencing the rheology of fresh cement asphalt emulsion paste10.1061/(ASCE)MT.1943-5533.0001653 ↗
20. Factors influencing rheological properties of fresh cement asphalt emulsion paste10.1016/j.conbuildmat.2014.07.020 ↗
21. New Methodology for designing self-compacting concrete
22. A theoretical frame to study stability of fresh concrete
23. Simulation of the flow of fresh cement suspensions by a Lagrangian finite element approach10.1016/j.jnnfm.2010.08.003 ↗
24. Demulsification process of asphalt emulsion in fresh cement-asphalt emulsion paste10.1617/s11527-014-0446-9 ↗
25. Influence of cement on rheology and stability of rosin emulsified anionic bitumen emulsion10.1061/(ASCE)MT.1943-5533.0001454 ↗
26. Investigation on the mixing stability of asphalt emulsion with cement through viscosity10.1061/(ASCE)MT.1943-5533.0001657 ↗
27. Adsorption behaviour between cement and asphalt emulsion in CA mortar10.1680/adcr.2007.00034 ↗
28. Study on the rheological properties of fresh cement asphalt paste10.1016/j.conbuildmat.2011.07.010 ↗
29. The thixotropic behavior of fresh cement asphalt emulsion paste10.1016/j.conbuildmat.2016.04.024 ↗
30. Factors influencing the structure build-up of fresh cement asphalt emulsion paste
31. Viscosity prediction of fresh cement asphalt emulsion pastes10.1617/s11527-016-0897-2 ↗
32. Yodel: a yield stress model for suspensions10.1111/j.1551-2916.2005.00888.x ↗
33. Theoretical determination of floc size in highly-concentrated zirconia-wax suspensions
34. Barnes · 2000
35. J.N. Dybaiski, The Chemistry of Asphalt Emulsions, in: Fifty-Fifth Annual Meeting Transportation Research Board, January. 1976.
36. The role and interaction of superplasticizer and emulsifier in fresh cement asphalt emulsion paste through rheology study10.1016/j.conbuildmat.2016.08.085 ↗
37. James · 2006 · 1