Fracture energy and mechanical characteristics of self-compacting concretes including waste bladder tyre
Source abstract
Abstract
Abstract Management of solid wastes is one of the most important environmental problems in the world. Waste tyres are also one of these solid wastes. The growing number of waste tyres that are stocked every year brings problems in respect of human health, environmental pollution, and also causes esthetical problems. The main purpose of this study is to investigate the effect of waste tyre addition on self-compacting concretes’ mechanical characteristics and fracture properties under bending. In this study, waste bladder tyres (RA) mechanically cut in 25, 50 and 75 mm lengths were used by volumetric replacement of coarse aggregates in self-compacting concretes (SCC). Unit weight, flow, J-ring, column segregation, water absorption, 28 days of compressive strength, ultrasound pulse velocity and fracture energy tests were applied on concretes obtained by replacement of coarse aggregates in 5%, 10% and 15% ratios by volume. Also, Scanning Electronic Microscope (SEM) and Energy Distribution Spectroscopy (EDS) analyses of the samples were examined. In the study, it was determined that RA replacement decreases unit weight of fresh concrete; when RA length ratio increases, it becomes difficult for the concrete to pass through reinforcement openings; in hardened concrete samples dry unit weight decreases; 10% fibre addition increases compressive strength values; after the ultrasonic pulse velocity measurement, the concretes are included in “good” quality concrete classifications. As a conclusion, it was determined that 25 mm long 10% rubber aggregate replacement to self-compacting concretes can give optimum results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A study on dynamic modulus of self-consolidating rubberized concrete10.12989/cac.2015.15.5.795 ↗
2. The Properties of Rubberized Concretes10.1016/0008-8846(95)00014-3 ↗
3. Properties of concrete incorporating rubber tyre particles10.1680/macr.1998.50.4.297 ↗
4. The effect of using waste tire rubber powder on the physical and mechanical properties of Portland cement
5. Prediction the effects of blast furnace slag and waste tire rubber powder on the setting time of Portland cement with fuzzy logic
6. Utilization of waste vehicle tires in concrete and its effect on the corrosion behavior of reinforcing steels10.1007/s12613-010-0319-3 ↗
7. Y. Koçak, S. Subaşı, Y. Yaman, L.O. Uğur, A. Ateş, The Effect of the Rate of Waste Tire Powder Substitution on the Physical and Mechanical Properties of CEM II Cement, ICAUD 2012–1st International Conference on Architecture and Urban Design (2012) pp: 1235–1240.
8. Rubberized Portland cement concrete10.1061/(ASCE)0899-1561(1999)11:3(206) ↗
9. Self-compacting concrete10.3151/jact.1.5 ↗
10. S.P. Shah, S.E. Swartz, C. Ouyang, Fracture mechanics of concrete: applications of fracture mechanics to concrete, in: Rock and Other Quasi-Brittle Materials, Wiley,1995.
11. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
12. TS EN 1008 · 2003
13. TS 3530 EN 933–1 · 1999
14. TS 706 EN 12620+A1 · 2003
15. EN 1097-6 · 2013
16. TS EN 12350–6 · 2010
17. TS EN 206-1 · 2014
18. EN 12390-3 · 2010
19. ASTM C 597 · 2009
20. Effect of basalt fibers on fracture energy and mechanical properties of HSC10.12989/cac.2016.17.4.553 ↗
21. Fracture mechanics of concrete test methods
22. ACI-446 · 2009
23. Effects of basalt and glass chopped fibers addition on fracture energy and mechanical properties of ordinary concrete: CMOD measurement10.1016/j.conbuildmat.2016.03.176 ↗
24. TS EN 12504-4 · 2010