Flexural behavior and microstructure of hybrid basalt textile and steel fiber reinforced alkali-activated slag panels exposed to elevated temperatures
Source abstract
Abstract
Abstract This study investigates the effects of high temperatures and exposure duration on the flexural behavior and microstructure of hybrid basalt textile and steel fiber reinforced alkali-activated slag panels. Three-point bending tests were conducted after heating specimens to 400 °C, 600 °C, and 800 °C for durations of 1 and 2 h. The effects of thermal exposure on the matrix and the basalt fibers from the panels were investigated with scanning electron microscopy. Element and phase analyses of the matrix were performed after exposure to high temperatures via energy dispersive spectroscopy and X-ray diffraction, respectively. The first crack and peak flexural strength of the specimens not exposed to heat reached 8.9 and 20.5 MPa, respectively. Obvious decreases in flexural performance occurred as temperature and duration increased as a result of the decomposition of the alkali-activated slag mortar (AASM) matrix and the deterioration of the bonding performance between the basalt textile and the matrix. Changing of the Ca/Si ratio, the Al/Si ratio, and the crystalline phase of the AASM matrix indicated that phase transformation occurred after heat exposure at 800 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Effect of elevated temperatures on the mechanical behavior of basalt textile reinforced refractory concrete10.1016/j.matdes.2014.08.060 ↗
2. Durability model for AR-glass fibres in textile reinforced concrete10.1617/s11527-007-9321-2 ↗
3. Flexural strengthening of RC beams with cement-based composites10.1061/(ASCE)CC.1943-5614.0000218 ↗
4. Fabric structure and its reinforcing efficiency in textile reinforced cement composites10.1016/S1359-835X(03)00003-4 ↗
5. Influences of textile characteristics on the tensile properties of warp knitted cement based composites10.1016/j.cemconcomp.2007.09.001 ↗
6. Alkali-activated binders: a review: Part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
7. Mechanical properties of alkali-activated concrete: a state-of-the-art review10.1016/j.conbuildmat.2016.09.121 ↗
8. A study on the setting characteristics of sodium silicate-activated slag pastes10.1016/S0008-8846(02)01096-7 ↗
9. Sodium silicate-based, alkali-activated slag mortars: Part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
10. Freeze-thaw cycle test and damage mechanics models of alkali-activated slag concrete10.1016/j.conbuildmat.2010.12.006 ↗
11. Sulfate attack on alkali-activated slag concrete10.1016/S0008-8846(01)00659-7 ↗
12. Resistance of alkali-activated slag concrete to acid attack10.1016/S0008-8846(03)00125-X ↗
13. Corrosion resistance of alkali-activated slag cement10.1680/adcr.2003.15.2.77 ↗
14. Alkali-activated slag mortars reinforced with AR glass fibre: performance and properties10.3989/mc.2006.v56.i283.10 ↗
15. Strain hardening fiber reinforced alkali-activated mortar-A feasibility study10.1016/j.conbuildmat.2012.06.007 ↗
16. Performance of an alkali-activated slag concrete reinforced with steel fibers10.1016/j.conbuildmat.2007.10.027 ↗
17. A review on basalt fibre and its composites10.1016/j.compositesb.2014.12.034 ↗
18. Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress10.1016/j.matdes.2013.09.050 ↗
19. Nonlinear analysis of masonry panels strengthened with textile reinforced mortar10.1016/j.engstruct.2015.12.021 ↗
20. Effect of elevated temperatures on the mechanical behavior of basalt textile reinforced refractory concrete10.1016/j.matdes.2014.08.060 ↗
21. Bond and failure mechanisms of textile reinforced concrete (TRC) under uniaxial tensile loading10.1016/j.cemconcomp.2006.12.012 ↗
22. Textile reinforced concrete for strengthening in bending and shear10.1617/s11527-005-9027-2 ↗
23. Fiber-reinforced concrete: an overview after 30years of development10.1016/S0958-9465(96)00046-7 ↗
24. Steady-state and multiple cracking of short random fiber composites
25. M. Butler, R. Hempel, M. Schiekel, The influence of short glass fibres on the working capacity of textile reinforced concrete. in: J. Hegger, W. Brameshuber, N. Will (Eds), Textile reinforced concrete. Proc. of the 1st International RILEM Symposium. Aachen; (2006) 45–54.10.1617/2351580087.005 ↗
26. M. Hinzen, W. Brameshuber, Influence of short fibres on strength, ductility and crack development of textile reinforced concrete. in: H.W. Reinhardt, A.E. Naaman, (Eds.), High performance fibre reinforced cement composites (HPFRCC5). Proc. of the 5th International RILEM workshop. Mainz; (2007) 105–112.
27. Barhum · 2013
28. Effect of short, dispersed glass and carbon fibres on the behaviour of textile-reinforced concrete under tensile loading10.1016/j.engfracmech.2012.06.001 ↗
29. Effects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag pastes10.1016/j.cemconcomp.2014.11.009 ↗
30. A short review on basalt fiber
31. Comparative flexural behavior of four reinforced cementitious composites10.1016/j.cemconcomp.2008.08.002 ↗
32. Review of mechanical properties of short fibre reinforced geopolymer composites10.1016/j.conbuildmat.2013.01.026 ↗
33. Comparative deflection hardening behavior of short fiber reinforced geopolymer composites10.1016/j.conbuildmat.2014.07.085 ↗
34. Flexural behavior of steel fiber reinforced concrete10.1061/(ASCE)0899-1561(1998)10:2(86) ↗
35. Residual fracture properties of normal- and high-strength concrete subject to elevated temperatures10.1680/macr.2000.52.2.123 ↗
36. Behaviour of beams made in textile reinforced mineral matrix composites, an experimental study10.1016/j.compstruct.2010.02.003 ↗
37. The effect of fiber properties on high performance alkali-activated slag/silica fume mortars10.1016/j.compositesb.2012.09.080 ↗
38. The high-temperature resistance performance of TRC thin-plates with different cementitious materials: Experimental study10.1016/j.conbuildmat.2016.04.070 ↗
39. Microcracking and strength development of alkali activated slag concrete10.1016/S0958-9465(01)00003-8 ↗
40. Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastes10.1016/j.cemconres.2006.11.021 ↗
41. Characterization of alkali activated slag paste after exposure to high temperatures10.1016/j.conbuildmat.2013.06.070 ↗
42. Chemical kinetics of CSH decomposition in hardened cement paste subjected to elevated temperatures up to 800°C10.1680/adcr.2001.13.2.47 ↗
43. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag-Part I: Effect of MgO10.1016/j.cemconres.2011.05.002 ↗
44. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag-Part II: Effect of Al2O310.1016/j.cemconres.2011.08.005 ↗
45. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
46. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
47. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
48. Hydration products and reactivity of blast-furnace slag activated by various alkalis10.1111/j.1151-2916.2003.tb03623.x ↗