Rutting resistance of porous asphalt mixture under coupled conditions of high temperature and rainfall
Source abstract
Abstract
Abstract Porous asphalt (PA) mixtures work real coupled conditions of high temperature and rainfall in rainy summer weather. The objective of this study is to develop a multi-physics repeated loading permanent deformation (MRLPD) test that can evaluate the rutting resistance of the PA mixture under such real coupled conditions. A multi-physics chamber was designed for the MRLPD test to achieve real coupled conditions of dry, rainfall onset, ongoing rainfall, and rainfall end, which are consistent with the rainfall process. Under the rainfall onset and ongoing rainfall conditions, the rutting resistance of the PA mixture is lower than that under the dry condition. PA mixture shows the poorest rutting resistance under the ongoing rainfall condition. The presence of water in the pores creates pore pressure, which facilitates moisture damage and consequently decreases the rutting resistance. The more time the PA mixture stays in a saturated state, the lower the rutting resistance is. PA mixture exhibits the best rutting resistance under the rainfall end condition because the pore pressure absorbs part of the loads and the decreased temperature of the specimen. The rutting resistance of the PA mixture is more sensitive to temperature and overloading than to moisture damage. Under the coupled conditions, high temperature accelerates the evolution of moisture damage, which leads to the acceleration of rutting failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Urban Stormwater Management Solutions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Drainability of permeable friction course mixtures10.1061/(ASCE)MT.1943-5533.0000053 ↗
2. Mix design, performance and maintenance of Permeable Friction Courses (PFC) in the United States: State of the Art10.1016/j.conbuildmat.2016.02.053 ↗
3. Structural contribution of open-graded friction course mixes in mechanistic-empirical pavement design10.1080/10298436.2013.857776 ↗
4. Performance of porous asphalt mixture with various additives10.1080/10298436.2016.1175560 ↗
5. Laboratory study on the stormwater retention and runoff attenuation capacity of four permeable pavements10.1061/(ASCE)EE.1943-7870.0001033 ↗
6. Influence of aggregate gradation on the performance properties of porous asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000602 ↗
7. Rutting-induced permeability loss of open graded friction course mixtures10.1520/JTE20150137 ↗
8. Development of an innovative uniaxial compression test to evaluate permanent deformation of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001038 ↗
9. Moisture sensitivity of asphalt mixtures under different load frequencies and temperatures10.1016/j.conbuildmat.2013.07.059 ↗
10. Influence of water and temperature on mechanical properties of selected asphalt pavements10.1617/14317 ↗
11. Experimental evaluation of long- and short-term moisture damage characteristics of asphalt mixtures10.1080/14680629.2015.1066705 ↗
12. Evaluation of adhesion properties of costa rican asphalt mixtures using the bitumen bond strength (BBS) and contact angle measurement tests
13. State of the art report on moisture sensitivity test methods for bituminous pavement materials10.1080/14680629.2002.9689930 ↗
14. Kim · 2005
15. Raveling of asphaltic mixes due to water damage: computational identification of controlling parameters10.1177/0361198105192900110 ↗
16. Kandhal · 2001
17. Comparison of permeable friction course mixtures fabricated using asphalt rubber and performance-grade asphalt binders10.1016/j.conbuildmat.2011.08.085 ↗
18. Comparison between flat rubber wheeled loaded wheel tester and asphalt pavement analyzer10.1080/14680629.2007.9690090 ↗
19. A model for dynamic creep evaluation of SBS modified HMA mixtures10.1016/j.conbuildmat.2010.06.101 ↗
20. Experimental characterization of rutting performance of Polyethylene Terephthalate modified asphalt mixtures under static and dynamic loads10.1016/j.conbuildmat.2014.05.006 ↗
21. Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions10.1016/j.conbuildmat.2014.02.052 ↗
22. Evaluation of microstructure and damage evolution for asphalt pavements in an advanced repeated load permanent deformation test using X-ray computed tomography10.1080/14680629.2016.1207555 ↗
23. Evaluation of asphalt mixtures' moisture sensitivity by dynamic creep test10.1061/(ASCE)MT.1943-5533.0000146 ↗
24. Study on surface heat budget of various pavements for urban heat island mitigation10.1155/2012/523051 ↗
25. Verification and modeling of three-stage permanent deformation behavior of asphalt mixes10.1061/(ASCE)0733-947X(2004)130:4(486) ↗
26. Witczak · 2002
27. Synthetic storm pattern for drainage design
28. Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum10.1016/j.conbuildmat.2016.05.006 ↗