journal article·2018-09

Experiment on sealing efficiency of carbon fiber composite grout under flowing conditions

Ping Yang, Yao-hui Liu, Shu-wen Gao, Zhi-cheng Li

Publisher page

Abstract

Abstract The greatest difficulty of grouting fractures under flowing condition was that the slurry was easily washed out by the flowing. To raise the sealing efficiency (SE) and dynamic flowing resistance of slurry, carbon fiber was added into the grout and a new grout for flowing water environmental was provided. Contrast tests and SEM tests were conducted to investigate the effect of carbon fiber. The result showed that the solidification velocity and dynamic flowing resistance increased with an increase of carbon fiber content due to the stochastic distribution and great surface friction of carbon fiber. In addition, a series of orthogonal tests were conducted to investigate the effect of some factors on the SE. The result showed that the SE decreased with the increase of initial flow speed and aperture width, and it increased with the increase of cement water ratio and additive content. Finally a fitting equation was acquired to provide reference to the practical engineering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Novel grout material comprised of calcium phosphate compounds: in vitro evaluation of crystal precipitation and strength reinforcement10.1016/j.enggeo.2011.11.011 ↗
2. Sealing model of grouting sealing using non-water reaction slurries
3. Rock fractures grouting with microbially induced carbonate precipitation10.1002/2016WR018884 ↗
4. Protection against water or mud inrush in tunnels by grouting: a review10.1016/j.jrmge.2016.05.002 ↗
5. Effect of different factors on propagation of carbon fiber composite cement grout in a fracture with flowing water10.1016/j.conbuildmat.2016.06.036 ↗
6. On the viscous behavior of cement mixtures with clay, sand, lime and bottom ash for jet grouting10.1016/j.conbuildmat.2015.05.072 ↗
7. Fracture-fracture interaction during grouting10.1016/j.tust.2009.11.003 ↗
8. Research on mechanism of grout diffusion of dynamic grouting and plugging method in water inrush of underground engineering
9. Study of column-hemispherical penetration grouting mechanism based on Bingham fluid of time-dependent behavior of viscosity
10. Study of cement-grout penetration into fractures under static and oscillatory conditions10.1016/j.tust.2014.08.003 ↗
11. Basic mechanism of elastic jacking and impact of fracture aperture change on grout spread, transmissivity and penetrability10.1016/j.tust.2015.04.002 ↗
12. Combined effect of superplasticizer, silica fume and temperature in the performance of natural hydraulic lime grouts10.1016/j.conbuildmat.2013.10.005 ↗
13. Stop mechanism for cementitious grouts at different water-to-cement ratios10.1016/j.tust.2008.11.001 ↗
14. Comparative experimental investigation of chemical grouting into a fracture with flowing and static water10.1016/j.mstc.2011.02.021 ↗
15. Experimental investigation on sealing efficiency of chemical grouting in rock fracture with flowing water10.1016/j.tust.2015.07.012 ↗
16. Characterization of a sodium aluminate (NaAlO2)-based accelerator made via a tablet processing method
17. Influence of liquid accelerator with different alkalinity on setting behavior and mechanical properties of cement pastes at different temperatures
18. Influence of sodium aluminate on cement hydration and concrete properties10.1016/j.conbuildmat.2014.04.089 ↗
19. Rapid curing of cement-bonded particleboard V. Mechanism of strength development with fortifiers and accelerators during steam injection pressing
20. Effect of cement mineralogy on the effectiveness of chloride-based accelerator10.1016/j.cemconcomp.2016.07.015 ↗
21. Rapid curing of cement-bonded particleboard III. Effect of sodium hydrogen carbonate and some cement hardening accelerators
22. Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier10.1016/S0008-8846(03)00214-X ↗
23. Properties comparison of mortars with welan gum or cellulose ether10.1016/j.conbuildmat.2015.10.116 ↗
24. Influence of thickeners on cement paste structure and performance of engineered cementitious composites10.1007/s11595-013-0680-y ↗
25. Effect of HPMC on the dispersibility of carbon fiber
26. The discussion on measuring methods of the gelling time of chemical grout
27. Chinese Institute of Rock Mechanics and Engineering · 1999 · 320
28. Experimental study on fibre-reinforced cementitious matrix confined concrete columns under axial compression
29. Influence of recycled carbon powder waste addition on the physical and mechanical properties of cement pastes10.1617/s11527-016-0850-4 ↗
30. Cement reinforced with short carbon fibers: a multifunctional material
31. The shear strength of rock joints in theory and practice10.1007/BF01261801 ↗
32. Review of a new shear strength criterion for rock joints10.1016/0013-7952(73)90013-6 ↗
33. N.R. Barton, S. Bandis, Review of predictive capability of JRCJCS model in engineering practice, in: Proc Int Conf. Rock Joints, Leon, Norway, 1990, pp. 603–610.
34. Strength, deformation and conductivity coupling of rock joints10.1016/0148-9062(85)93227-9 ↗
35. Semi-analytical procedure for considering roughness effect on hydraulic properties of standard JRC profile
36. Lomize · 1951
37. Romn · 1966
38. A study of groundwater flow in jointed rock and its influence on the stability of rock masses
39. Rheological, porosimetric, and SEM studies of cements with additions of natural zeolites10.1180/claymin.2011.046.2.225 ↗
40. Micro-structure analysis of hydration process of carbon fiber composite grout
41. Eriksson · 2002
42. Trapping zones: the effect of fracture roughness on the directional anisotropy of fluid flow and colloid transport in a single fracture10.1029/2006GL027275 ↗