journal article·2018-08Open access

Production of lightweight aerated alkali-activated slag pastes using hydrogen peroxide

Murat Şahin, Sinan Turhan Erdoğan, Özgür Bayer

Abstract

Abstract This study investigated the production of lightweight aerated alkali-activated slag pastes (LAAASP) using hydrogen peroxide (H2O2). A mixture of sodium hydroxide and sodium silicate solution was used for the activation of slag. Physical, mechanical, and thermal properties of samples cured under different curing conditions were investigated. Various water-to-slag ratios (W/S) and H2O2 contents were used to explore the expansion mechanism of fresh mixtures and to investigate their effect on apparent density. The LAAASP produced were in the apparent density range of 516–1199 kg/m3 and had 0.5–30.0 MPa compressive strength. Thermal conductivities of aerated samples varied from 0.117 to 0.206 W / m · K in the dry density range of 480–1098 kg/m3 and were lower than thermal conductivities reported for autoclaved aerated concrete. The use of more than 0.75% H2O2 by mass of slag was found to be non-essential to achieve low-density pastes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. J.W. Aylsworth, F.L. Dyer, Porous artificial stone and its production, US Patent 1,087,098 (Feb. 17 1914).
2. Short · 1963
3. A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
4. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
5. Preparation and characterization of super low density foamed concrete from portland cement and admixtures10.1016/j.conbuildmat.2014.08.078 ↗
6. Tests on high-performance aerated concrete with a lower density10.1016/j.conbuildmat.2014.10.030 ↗
7. Effect of perlite waste addition on the properties of autoclaved aerated concrete10.1016/j.conbuildmat.2016.05.019 ↗
8. Utilization of waste glass in autoclaved aerated concrete10.1016/j.proeng.2015.10.040 ↗
9. Effect of the ca-to-si ratio on the properties of autoclaved aerated concrete containing coal fly ash from circulating fluidized bed combustion boiler10.1016/j.conbuildmat.2015.02.077 ↗
10. Durability of autoclaved construction materials of sewage sludge–cement–fly ash–furnace slag10.1016/j.conbuildmat.2013.07.018 ↗
11. Preparation and properties of autoclaved aerated concrete using coal gangue and iron ore tailings10.1016/j.conbuildmat.2015.12.041 ↗
12. Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates10.1016/j.conbuildmat.2009.12.024 ↗
13. Physical and mechanical properties of lightweight aerated geopolymer10.1016/j.conbuildmat.2015.01.043 ↗
14. Inorganic foams made from alkali-activated fly ash: mechanical, chemical and physical properties10.1016/j.jeurceramsoc.2014.08.024 ↗
15. Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements10.1016/j.jeurceramsoc.2011.12.030 ↗
16. A comparison between different foaming methods for the synthesis of light weight geopolymers10.1016/j.ceramint.2014.05.108 ↗
17. Properties of lightweight materials on the base of blast furnace slag evaluation, Czasopismo Techniczne
18. Alkali-activated composites based on slags from iron and steel metallurgy
19. Mix design, properties and cost analysis of fly ash-based geopolymer foam10.1016/j.conbuildmat.2015.01.063 ↗
20. Preparation of ceramic foams from metakaolin-based geopolymer gels
21. Characterization of geopolymer fly-ash based foams obtained with the addition of al powder or H2O2 as foaming agents10.1016/j.matchar.2016.01.019 ↗
22. Development of porous fly ash-based geopolymer with low thermal conductivity10.1016/j.matdes.2014.09.024 ↗
23. Influence of blowing agent on the fresh-and hardened-state properties of lightweight geopolymers10.1016/j.matdes.2016.07.039 ↗
24. Thermal insulating foamy geopolymers from perlite10.1016/j.mineng.2010.07.015 ↗
25. Fly ash-based geopolymer lightweight concrete using foaming agent10.3390/ijms13067186 ↗
26. Non-autoclaved high strength cellular concrete from alkali activated slag10.1016/j.conbuildmat.2011.06.010 ↗
27. Design and performance evaluation of ultra-lightweight geopolymer concrete10.1016/j.matdes.2015.09.167 ↗
28. Provis · 2014
29. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
30. Alkali activation of a slag at ambient and elevated temperatures10.1016/j.cemconcomp.2011.08.003 ↗
31. Shi · 2006
32. D.L. Bean, P.G. Malone, Alkali-activated glassy silicate foamed concrete, US Patent 5,605,570 (Feb. 25 1997).
33. Performance evaluation of foaming agents in cellular concrete based on foamed alkali-activated slag10.1139/cjce-2016-0491 ↗
34. Davis · 1993
35. Ghg emissions from primary aluminum production in China: regional disparity and policy implications10.1016/j.apenergy.2015.05.056 ↗
36. USGS, Usgs minerals yearbook, aluminum, Retrieved 16 September 2017 from https://minerals.usgs.gov/minerals/pubs/commodity/aluminum/myb1-2015-alumi.pdf.
37. Development of a Sustainable and Economically Viable Process for Making Ethylene Oxide: A Case Study
38. Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications10.1080/19648189.2015.1125392 ↗
39. Schumb · 1955
40. ASTM C191 · 2013
41. ASTM C230 · 2014
42. Influence of filler type on the properties of foam concrete10.1016/j.cemconcomp.2005.12.001 ↗
43. Properties and sustainability of alkali-activated slag foamed concrete10.1016/j.jclepro.2013.12.068 ↗
44. ASTM C495 · 2012
45. ASTM C513 · 2011
46. W.S. Rasband, Imagej, us national institutes of health, http://rsb.info.nih.gov/ij/(1997-2007).
47. ASTM E1530 · 2016
48. ASTM C518 · 2017
49. ASTM C138 · 2017
50. Microstructure of high-strength foam concrete10.1016/j.matchar.2008.12.011 ↗
51. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements10.1680/adcr.2003.15.3.129 ↗
52. Sorption characteristics of foam concrete10.1016/j.cemconres.2007.05.010 ↗
53. Properties of concrete with a new type of saponin air-entraining agent10.1016/S0008-8846(00)00340-9 ↗
54. Failure mechanism of foamed concrete made with/without additives and lightweight aggregate10.3151/jact.14.511 ↗
55. Neville · 2010
56. Decomposition characteristics of hydrogen peroxide in sodium hydroxide solution
57. Factors affecting the strength of alkali-activated slag10.1016/0008-8846(94)90026-4 ↗
58. Alkali-activated slag mortars: mechanical strength behaviour10.1016/S0008-8846(99)00154-4 ↗
59. Aroni · 1993
60. Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence10.1016/j.cemconres.2014.06.004 ↗
61. Porosity and permeability of foamed concrete10.1016/S0008-8846(01)00490-2 ↗
62. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
63. An experimental study on thermal conductivity of iron ore sand cement mortar10.1016/j.conbuildmat.2015.10.108 ↗
64. Alkali activated slag foams: the effect of the alkali reaction on foam characteristics10.1016/j.jclepro.2017.01.134 ↗
65. The thermal performance of European autoclaved aerated concrete
66. Thermal conductivity: I, concepts of measurement and factors affecting thermal conductivity of ceramic materials10.1111/j.1551-2916.1954.tb20100.x ↗
67. Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete10.1016/j.cemconcomp.2015.03.013 ↗