Fiber-reinforced concrete containing ultra high-strength micro steel fibers under active confinement
Source abstract
Abstract
Abstract This paper presents an experimental study on the compressive behavior of steel fiber-reinforced concrete (SFRC) under active confining pressure. Four different SFRC mixes containing ultra high-strength micro steel fibers at two volume fractions of 1% and 2% were prepared to produce concretes with two different target compressive strengths of 50 and 100 MPa. The active confining pressure was applied on SFRC using a Hoek cell at different confinement levels of 5, 10, 15, and 25 MPa. The effects of confining pressure and steel fiber volume fraction on the compressive behavior of concrete were examined through the axial compression tests on unconfined and actively confined SFRCs. The results show that the axial strength and peak axial strain of SFRCs increase with an increase in the fiber volume fraction. The fiber volume fraction also affects the post-peak branch trend of the axial stress-strain relationships of SFRCs under a given confinement level. SFRCs with a higher volume fraction exhibit more shallow post-peak branches than those of SFRCs with a lower volume fraction. The results also show that the axial strain of SFRC at a given lateral strain increases with an increase in the volume fraction, indicating a reduced rate of dilation of SFRCs at a higher volume fraction. These promising findings point to the great potential of the use of ultra high-strength micro steel fibers in the development of high performance composite structural members in applications where the concrete will be subjected to lateral confinement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Influence of concrete strength and confinement method on axial compressive behavior of FRP confined high- and ultra high strength concrete10.1016/j.compositesb.2013.02.017 ↗
2. Unified stress-strain model for FRP and actively confined normal-strengh and high-strength concrete
3. An experimental study of steel fiber-reinforced high-strength concrete slender columns under cyclic loading10.1016/j.engstruct.2012.06.052 ↗
4. Stress-strain behavior of steel fiber-reinforced concrete in compression10.1061/(ASCE)0899-1561(2008)20:3(255) ↗
5. Stress-strain model of ultrahigh performance concrete confined by fiber-reinforced polymers10.1061/(ASCE)MT.1943-5533.0000769 ↗
6. Assessment of factors influencing mechanical properties of steel fiber reinforced self-compacting concrete10.1016/j.matdes.2015.06.024 ↗
7. Behavior of steel fiber-reinforced high-strength concrete-filled FRP tube columns under axial compression10.1016/j.engstruct.2015.02.020 ↗
8. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
9. High-performance fiber-reinforced concrete: a review10.1007/s10853-016-9917-4 ↗
10. Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high perfoemance recycled aggregate concrete10.1016/j.compstruct.2017.08.086 ↗
11. Parameter optimization on compressive strength of steel fiber reinforced high strength concrete10.1016/j.conbuildmat.2010.12.051 ↗
12. Compressive behavior of steel-fiber reinforced concrete with a high reinforcing index10.1061/(ASCE)MT.1943-5533.0000372 ↗
13. Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC)10.1016/j.conbuildmat.2012.04.030 ↗
14. Tests of eccentrically loaded L-shaped section steel fibre high strength reinforced concrete and composite columns10.1016/j.engstruct.2012.01.009 ↗
15. A micromorphic model for steel fiber reinforced concrete10.1016/j.ijsolstr.2012.05.032 ↗
16. Effect of mineral admixtures and steel fiber volume contents on the behavior of high performance fiber reinforced concrete10.1016/j.matdes.2014.06.066 ↗
17. Experimental research for the effect of high temperature on the mechanical properties of steel fiber-reinforced concrete10.1016/j.conbuildmat.2014.11.005 ↗
18. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete10.1016/j.conbuildmat.2015.11.028 ↗
19. Effect of different types of fibers on the microstructure and the mechanical behavior of ultra-high performance fiber-reinforced concretes10.1016/j.compositesb.2015.09.059 ↗
20. Strain hardening ultra-high performance fiber reinforced cementitious composites: effect of fiber type and concentration10.1016/j.compositesb.2016.08.004 ↗
21. Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression10.1016/j.conbuildmat.2017.02.094 ↗
22. Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements10.1016/j.cemconcomp.2017.02.010 ↗
23. Analytical modeling of plastic behavior of uniformly FRP confined concrete members10.1016/j.compositesb.2008.05.001 ↗
24. FRP retrofit of low and medium strength circular and rectangular reinforced concrete columns10.1061/(ASCE)0899-1561(2008)20:2(169) ↗
25. Comparative behaviour of hollow columns confined with FRP composites10.1016/j.compstruct.2010.05.020 ↗
26. Behavior and effectiveness of FRP wrap in the confinement of large concrete cylinders10.1061/(ASCE)CC.1943-5614.0000119 ↗
27. Effective strain of FRP for confined circular concrete columns10.1016/j.compstruct.2012.08.021 ↗
28. Axial compressive behavior of circular high-strength concrete-filled FRP tubes10.1061/(ASCE)CC.1943-5614.0000410 ↗
29. Studies on carbon fiber polymer confined slender plain and steel fiber reinforced concrete columns10.1016/j.engstruct.2015.08.011 ↗
30. The experimental studies on behavior of ultrahigh-performance concrete confined by hybrid fiber-reinforced polymer tubes10.1155/2015/201289 ↗
31. Evaluation of peak and residual conditions of actiely confined concrete using neuro-fuzzy and neural computing techniques10.1007/s00521-016-2492-4 ↗
32. Damage-plasticity model for FRP-confined normal-strength and high-strength concrete10.1061/(ASCE)CC.1943-5614.0000712 ↗
33. Finite-element modeling of actively confined normal-strength and high-strength concrete under uniaxial, biaxial, and triaxial compression10.1061/(ASCE)ST.1943-541X.0001589 ↗
34. Behavior of rubberized concrete under active confinement10.1016/j.conbuildmat.2017.01.105 ↗
35. Understanding the compressive behavior of shape memory alloy (SMA)-confined normal- and high-strength concrete10.1016/j.compstruct.2018.05.008 ↗
36. Constitutive behaviour of confined fibre reinforced concrete under axial compression10.1016/S0958-9465(02)00051-3 ↗
37. Axial compression behavior of hybrid fiber reinforced concrete filled steel tube stub column10.1016/j.conbuildmat.2018.04.089 ↗
38. Behavior of high strength concrete with and without steel fiber reinforcement in triaxial compression10.1016/j.cemconres.2006.05.021 ↗
39. Experimental study on macroscopic mechanical behavior of SFRC under triaxial compression10.1080/15376494.2011.627644 ↗
40. ASTM C143/C143M-12 · 2012
41. C642-13, Standard · 2013
42. ASTM C192/C192M-07 · 2007
43. ASTM C39/C39M-16b · 2016
44. Behavior of steel fiber-reinforced concrete-filled FRP tube columns: experimental results and a finite element model10.1016/j.compstruct.2018.03.094 ↗