Influence of mineral nano-fibers on the physical properties of road cement concrete material
Source abstract
Abstract
Abstract In this paper, brucite nano-fiber is processed and used as reinforcement to improve the toughness of road cement concrete material. The brucite nano-fiber is obtained by soaking the natural low-coat brucite short fibers in the superplasticizer solution and then agitating in a forced mixer to refine it to the nano meter level. The mechanical properties as elastic modulus, dry shrinkage, anti-frost, thermal expansion, and flexural fatigue performance of the nano-fiber concrete are investigated. The nano-fiber reinforced cement concrete was also put into practice in highway. Results show that nano-fiber concrete has better toughness. Its flexural strength is 7.4% and 17.7% higher than that of the ordinary fiber concrete and the plain concrete, respectively. Its ratio of compression to flexural strengths is 6.4% and 16.1% lower than that of the rest two. Nano-fiber concrete has lower static modulus and higher dynamic modulus. Compared with ordinary fiber concrete and plain concrete, nano-fiber concrete is 41.0% and 61.3% lower in flexural elastic modulus, and is 1.12 and 1.24 times higher in dynamic modulus of elasticity. Nano-fiber concrete has stronger capability to resist dry shrinkage, freeze-thaw damage, thermal expansion and bending fatigue stresses. Compared with ordinary fiber concrete and plain concrete, nano-fiber concrete is 35.7% and 55.9% lower in dry linear shrinkage; 3.2% and 7.9% less loss rate in compression strength, and 1.9% and 4.5% less loss rate in flexural strength after 50 cycles freezing-thawing; 13.9% and 28.7% lower in coefficient of thermal expansion; and 15% and 50% more longer in bending fatigue service life. Nano-fiber concrete is comprehensively superior to ordinary fiber concrete and plain concrete in cost performance. After more than 8 years traffic practice, the nano-fiber concrete test road is still in good condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. A study on the shrinkage control of fiber reinforced concrete pavement10.1016/j.proeng.2011.07.354 ↗
2. Experimental investigation and monitoring of a polypropylene-based fiber reinforced concrete road pavement10.1016/j.conbuildmat.2013.05.077 ↗
3. etc, Experimental investigation on mechanical properties of Hybrid Fibre Reinforced Concrete10.1016/j.conbuildmat.2017.09.098 ↗
4. Thin steel fibre cement mortar overlay for concrete pavement10.1016/0958-9465(90)90018-S ↗
5. Investigation of fiber concrete for road and bridge building10.1016/j.proeng.2017.04.422 ↗
6. Performance of fiber-reinforced EAF slag concrete for use in pavements10.1016/j.conbuildmat.2017.05.174 ↗
7. The environmental safety investigation on brucite fiber in Shannan
8. etc, Physical properties investigation of fibrous brucite(FB)in the south of shaanxi
9. Investigation of brucite fiber reinforced concrete10.1016/j.cemconres.2004.02.018 ↗
10. Dispersing effects of superplsticizer to brucite fibers
11. Research on the influence of short fiber brucite on the performance of cement based composites
12. etc, Surfactant chain length controls photoinduced electron transfer in surfactant bilayer protected carbon nanoparticles10.1016/j.matlet.2014.11.104 ↗
13. The morphology of entrained air voids in hardened cement paste generated with different anionic surfactants10.1016/j.cemconcomp.2008.02.003 ↗