Enhanced impact energy absorption in self-healing strain-hardening cementitious materials with superabsorbent polymers
Source abstract
Abstract
Abstract Concrete is the most-used man-made construction material worldwide. One of its major flaws remains the susceptibility to cracking upon impact loading. In this study, plates containing different amounts of superabsorbent polymers were impacted at four different ages (1 week, 1 month, 4 months and 6 months) and stored at different healing conditions (wet/dry cycles and 95 ± 5% RH). After 28 days of healing the plates were impacted and healed again. When the deformations during impact and the rebound after the impact were analysed, the specimens containing SAPs showed a more ductile behaviour during impact loading compared to reference samples. A good healing was confirmed by natural frequency analysis. Even during a second impact loading of healed samples a significant regain in natural frequency was obtained. The evolution of the natural frequencies also showed a superior healing caused by wet/dry cycles compared to healing at 95 ± 5% RH. Only in specimens with SAPs, the healing condition of 95 ± 5% RH resulted in a regain in natural frequencies due to the moisture uptake by the SAPs and subsequent healing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Applications in Construction Materials · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. From straw in bricks to modern use of microfibres in cementitious composites for improved autogenous healing – a review10.1016/j.conbuildmat.2015.07.018 ↗
2. Self-healing in cementitious materials – a review10.3390/ma6062182 ↗
3. Validation of self-healing properties of construction materials through non-destructive and minimal invasive testing10.1002/admi.201800179 ↗
4. Autogenous healing of engineered cementitious composites under Wet-dry cycles10.1016/j.cemconres.2009.01.013 ↗
5. Self-healing cementitious materials by the combination of microfibres and superabsorbent polymers10.1177/1045389X12438623 ↗
6. Snoeck · 2015 · 364
7. Repeated autogenous healing in strain-hardening cementitious composites by using superabsorbent polymers
8. Water permeability and autogenous healing of cracks in concrete
9. X-ray computed microtomography to study autogenous healing of cementitious materials promoted by superabsorbent polymers10.1016/j.cemconcomp.2015.10.016 ↗
10. 225-SAP, Application of Superabsorbent Polymers (SAP) in Concrete Construction, in: V. Mechtcherine, H.W. Reinhardt (Eds.) RILEM State-of-the-Art Report Prepared by Technical Committee 225-SAP, 2012, p. 165.
11. Effect of superabsorbent polymers (SAP) on the freeze-thaw resistance of concrete: results of a RILEM interlaboratory test
12. A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials – report of the RILEM TC 260-RSC
13. Water-entrained cement-based materials I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
14. Self-sealing of cracks in concrete using superabsorbent polymers10.1016/j.cemconres.2015.09.008 ↗
15. The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials10.1016/j.cemconres.2015.03.020 ↗
16. Superabsorbent polymers to mitigate plastic drying shrinkage in a cement paste as studied by NMR10.1016/j.cemconcomp.2018.06.019 ↗
17. The water kinetics of superabsorbent polymers during cement hydration and internal curing visualized and studied by NMR
18. Super absorbent polymers to simulate self healing in ECC
19. Belie, Superabsorbent polymers to prevent water movement in cementitious materials
20. The use of superabsorbent polymers as a crack sealing and crack healing mechanism in cementitious materials
21. Belie, Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.5010.1016/j.conbuildmat.2014.09.012 ↗
22. Can superabsorbent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?10.1016/j.conbuildmat.2011.12.062 ↗
23. Engineered Cementitious Composites (ECC) – Material, Structural, and Durability Performance
24. Feasibility study of a passive smart self-healing cementitious composite10.1016/S1359-8368(98)00034-1 ↗
25. Behaviour of strain-hardening cement-based composites under high strain rates10.3151/jact.9.51 ↗
26. Behaviour of hybrid-fibre engineered cementitious composites subjected to dynamic tensile loading and projectile impact10.1061/(ASCE)0899-1561(2005)17:2(143) ↗
27. Low velocity flexural impact behavior of AR glass fabric reinforced cement composites10.1016/j.cemconcomp.2009.04.011 ↗
28. An experimental study on local behavior of reinforced concrete slabs to missile impact10.1016/0029-5493(91)90121-W ↗
29. Resistance of high-strength concrete to projectile impact10.1016/j.ijimpeng.2004.04.009 ↗
30. A review of procedures for the analysis and design of concrete structures to resist missile impact effects10.1016/0029-5493(76)90015-7 ↗
31. Hybrid-fiber reinforced engineered cementitious composite under tensile and impact loading10.1016/j.matdes.2016.12.047 ↗
32. Determining the impact behavior of concrete beams through experimental testing and meso-scale simulation: I. Drop-weight tests10.1016/j.engfracmech.2014.12.019 ↗
33. Impact behavior of concrete columns confined by both GFRP tube and steel spiral reinforcement10.1016/j.conbuildmat.2016.11.095 ↗
34. Strain-rate effects in fibre-reinforced concrete subected to impact and impulsive loading10.1016/0010-4361(82)90052-0 ↗
35. Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography10.1016/j.cemconres.2012.05.005 ↗
36. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments10.1016/j.cemconres.2015.06.013 ↗
37. Incorporation of SAP particles as controlling pre-existing flaws to improve the performance of ECC10.1016/j.conbuildmat.2011.08.032 ↗
38. Water penetration through cracks in self-healing cementitious materials with superabsorbent polymers studied by neutron radiography10.1016/j.cemconres.2018.07.002 ↗