Angle bracket connections for CLT structures: Experimental characterization and numerical modelling
Source abstract
Abstract
Abstract This paper presents an enhanced coupled axial-shear model for the monotonic and cyclic behavior of Cross Laminated Timber (CLT) panel – angle bracket connections. The proposed model accounts for the degradation phenomena due to cyclic loading that may affect strength, unloading and re-loading stiffnesses. The main parameters necessary to define the constitutive laws of the model are evaluated by linear regression analyses performed on the data obtained by an extensive experimental campaign specifically designed and carried out at the University of Bologna on CLT panel – angle bracket connections. After the first phase of model calibration, a comparison between numerical and experimental results from both monotonic and cyclic test series are performed to validate the model. These analyses demonstrate the effectiveness of the proposed model in representing the coupled response of angle bracket connections under simultaneous application of axial and shear forces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Structural Engineering and Vibration Analysis · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Experimental tests on cross-laminated timber joints and walls10.1680/stbu.13.00085 ↗
2. Shaking-table test of a cross-laminated timber structure10.1680/stbu.13.00086 ↗
3. Testing of racking behavior of massive wooden wall panels
4. Cyclic behavior of CLT wall systems: experimental tests and analytical prediction models10.1061/(ASCE)ST.1943-541X.0001246 ↗
5. CLT wall elements under cyclic loading – details for anchorage and connection
6. Seismic performance of cross laminated wood panels
7. In-plane stiffness of CLT panels with and without openings
8. In-plane stiffness of cross-laminated timber panels with openings10.2749/101686617X14881932436131 ↗
9. Failure analysis of CLT shear walls with opening subjected to horizontal and vertical loads
10. Full-scale shaking-table tests of XLam panel systems and numerical verification: specimen 110.1061/(ASCE)ST.1943-541X.0000754 ↗
11. Performance of a 2-story CLT house subjected to lateral loads10.1061/(ASCE)ST.1943-541X.0001315 ↗
12. Full-scale tests and numerical analysis of low-rise CLT structures under lateral loading10.1061/(ASCE)ST.1943-541X.0001348 ↗
13. New technologies for construction of medium-rise buildings in seismic regions: the XLAM case10.2749/101686608784218680 ↗
14. Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions10.1016/j.engstruct.2011.05.020 ↗
15. Experimental campaign for the mechanical characterization of connection systems in the seismic design of timber buildings
16. Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures10.1617/s11527-014-0278-7 ↗
17. Cyclic behavior of typical screwed connections for cross-laminated (CLT) structures10.1007/s00107-014-0877-6 ↗
18. Experimental characterization of monotonic and cyclic loading responses of CLT panel-to-foundation angle bracket connections10.1061/(ASCE)MT.1943-5533.0001144 ↗
19. Combined loading of self-tapping screws
20. Experimental test of cross laminated timber connections under bi-directional loading
21. Axial – Shear interaction on CLT hold-down connections – Experimental investigation10.1016/j.engstruct.2018.01.021 ↗
22. Influence of wall assembly on behaviour of cross-laminated timber buildings10.1680/stbu.13.00081 ↗
23. Experimental-numerical analyses of the seismic behaviour of cross-laminated wall systems
24. Approximate R-factor for cross-laminated timber walls in multistory buildings10.1061/(ASCE)AE.1943-5568.0000117 ↗
25. Force modification factors for CLT structures for NBCC
26. A component approach for the hysteretic behaviour of connections in cross-laminated wooden structures10.1002/eqe.2310 ↗
27. Hysteretic modelling of moment-resisting nailed timber joints10.5459/bnzsee.14.4.233-243 ↗
28. Stewart · 1987
29. Dolan · 1989
30. Engineered timber structures: an evaluation of their seismic behaviour
31. Modeling the hysteretic response of mechanical connections for wood structures
32. Cyclic analysis of wood shear walls10.1061/(ASCE)0733-9445(2001)127:4(433) ↗
33. Prediction of seismic behavior of wood-framed shear walls with openings by pseudodynamic test and FE model10.1007/s100860300023 ↗
34. SOFIE project – 3D shaking table test on a seven-storey full-scale cross-laminated timber building10.1002/eqe.2309 ↗
35. Non-linear simulation of shaking-table tests on 3- and 7-storey X-Lam timber buildings10.1016/j.engstruct.2016.01.055 ↗
36. Investigating the hysteretic behavior of cross-laminated timber wall systems due to connections
37. Coupled axial-shear numerical model for CLT connections10.1016/j.conbuildmat.2017.05.141 ↗
38. Experimental campaign of mechanical CLT connections subjected to a combination of shear and tension forces
39. ETAG-015, Three-dimensional nailing plates, European Organization for Technical Approvals, Brussels, Belgium, 2012.
40. ETA-08/0271, CLT – Cross Laminated Timber: solid wood slab elements to be used as structural element in buildings, European Organisation for Technical Approvals, Brussels, Belgium, 2011.
41. EN 1380, Timber structures – Test methods – Load bearing nails, screws, dowels and bolts, CEN, Brussels, Belgium, 2009.
42. ETA-04/0013, Nails and screws for use in nailing plates in timber structures, European Organization for Technical Approvals, Brussels, Belgium, 2015.
43. ETA-09/0323, Three dimensional nailing plate (angle bracket for wood to wood connections), European Organization for Technical Approvals, Brussels, Belgium, 2009.
44. EN 26891, Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics, CEN, Brussels, Belgium, 1991.
45. EN 12512, Timber structures. Test methods. Cyclic testing of joints made with mechanical fasteners, CEN, Brussels, Belgium, 2011.
46. A beam-column joint model for simulating the earthquake response of reinforced concrete frames
47. Seismic damage analysis of reinforced concrete buildings10.1061/(ASCE)0733-9445(1985)111:4(740) ↗