Changes in moisture performance of wood after weathering
Source abstract
Abstract
Abstract After the durability of wood against wood decay fungi, its water performance is the next most important factor that influences the performance of wood in outdoor, above-ground applications. It is therefore of major importance to optimize methods that are able to predict the moisture behaviour of wood in outdoor applications. In order to elucidate these questions, samples were prepared from European oak (Quercus robur/Q. petraea), sweet chestnut (Castanea sativa), European larch (Larix decidua), Scots pine heartwood and sapwood (Pinus sylvestris), Norway spruce (Picea abies) and beech (Fagus sylvatica). The moisture performance of the samples was altered by thermal modification, wax, oil and biocide treatment. Two types of specimens were prepared; smaller specimens (1.5 × 2.5 × 5.0 cm) were exposed to natural weathering for three periods (9, 18 and 27 months) and subsequently analyzed in the laboratory with various methods (contact angle, short- and long-term water uptake and water vapor uptake). In parallel, bigger specimens (2.5 × 5.0 × 50 cm) were exposed outdoors in a monolayer exposure and equipped with moisture monitoring sensors for 18 months. Water performance of wood could change as a result of weathering, being the most evident at thermally modified wood, where the decrease of the moisture performance was the most evident. The results of the study clearly showed that the water performance of the majority of the materials decreased with natural weathering. These results indicate that in order to elucidate the moisture performance of wood fully, a variety of laboratory tests needs to be applied, relating to both liquid water performance and water vapour interactions with wood.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tree-ring climate responses · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Brischke · 2015
2. Brischke · 2014
3. Measurement system for long-term recording of wood moisture content with internal conductively glued electrodes10.1016/j.buildenv.2007.10.002 ↗
4. Micronized copper wood preservatives: efficacy of ion, nano, and bulk copper against the brown rot fungus Rhodonia placenta10.1371/journal.pone.0142578 ↗
5. Connell · 2004
6. Classification of uncoated plywood based on moisture dynamics10.1016/j.conbuildmat.2017.09.194 ↗
7. Eaton · 1993
8. EN 113 · 2004
9. EN 1609 · 1997
10. EN 335 · 2013
11. EN 350 · 2015
12. ENV 1250-2 · 1994
13. Wood modification by heat treatment: a review10.15376/biores.4.1.Esteves ↗
14. Water vapour sorption of natural fibres
15. Thermal modification of wax-impregnated wood to enhance its physical, mechanical, and biological properties10.1515/hf-2016-0063 ↗
16. Monitoring of window, door, decking and façade elements made of thermally modified spruce wood in use
17. Efficacy of linseed- and tung-oil-treated wood against wood-decay fungi and water uptake10.1016/j.ibiod.2013.07.011 ↗
18. Fungicidal properties of individual components of copper ethanolamine-based wood preservatives10.1016/j.ibiod.2007.06.017 ↗
19. The federal insecticide, fungicide, and rodenticide act and its impact on the development of wood preservatives: registration requirements
20. Sorption properties of wood impregnated with boron compounds, sodium chloride and glucose10.1080/07373930802565947 ↗
21. Sorption properties of wood impregnated with aqueous solution of boric acid and montan wax emulsion10.1002/app.33196 ↗
22. The combined effect of wetting ability and durability on outdoor performance of wood: development and verification of a new prediction approach
23. Concrete vs. wood in buildings – an energy system approach10.1016/j.buildenv.2011.11.011 ↗
24. Moisture content prediction of rain-exposed wood: test and evaluation of a simple numerical model for durability applications10.1016/j.buildenv.2015.11.037 ↗
25. Material moisture content of wood and cement mortars – electrical resistance-based measurements in the high ohmic range10.1016/j.conbuildmat.2017.07.090 ↗
26. Wood as a building material in the light of environmental assessment of full life cycle of four buildings10.1016/j.conbuildmat.2013.11.066 ↗
27. Development of the industrial kiln for thermal wood modification by a procedure with an initial vacuum and commercialisation of modified Silvapro wood
28. Permeability changes in heartwood of Picea abies and Abies alba induced by incubation with Physisporinus vitreus10.1515/HF.2006.071 ↗
29. Changes in the chemical composition and decay resistance of thermally-modified hevea Brasiliensis wood10.1371/journal.pone.0151353 ↗
30. A review on natural products as wood protectant10.1007/s00226-011-0448-5 ↗
31. The decay resistance of modified wood influenced by moisture exclusion and swelling reduction10.1016/j.ibiod.2013.02.004 ↗
32. Moisture dynamics of modified wood and the relevance towards decay resistance
33. Phenolic extractives of wound-associated wood of beech and their fungicidal effect10.1016/j.ibiod.2012.10.013 ↗
34. Wilkinson · 1979
35. Influence of artificial and natural weathering on the hydrophobicity and surface properties of wood10.15376/biores.11.2.4964-4989 ↗
36. Influence of artificial and natural weathering on the moisture dynamic of wood