Influence of intensity & eccentricity of posttensioning force and concrete strength on shear behavior of epoxied joints in segmental box girder bridges
Source abstract
Abstract
Abstract Precast concrete segmental bridges have the advantages of rapid construction speed, excellent quality control and low cost. The structural behavior of segmental bridges largely depends on the behavior of the joints between segments. In this study, a series of specimens with epoxied joints, were tested to assess shear behavior of box girder segmental bridges, under direct shear loading. The study parameters were: confining stress level, prestressing eccentricity, and the concrete compressive strength. Shear behavior, shear capacity, and crack patterns of the joints were investigated as well. Mechanisms of sequential shear failure and a detailed analysis of failure events are also presented. It was found that the shear capacity of the joints increased approximately 40% for each increased 50% of the confining stress. Eccentricity of prestressing force wasn’t affecting the elastic behavior of the joints, but its role was appeared obviously at the plastic stage. By increasing concrete compressive strength up to 70 MPa, the joint shear capacity can be increased significantly. The experimental results of the current study and results of other researchers were compared with design provisions. It was seen that the relationships tended to underestimate the shear strength of keyed epoxied specimens by an average value of 11.3%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Infrastructure Maintenance and Monitoring · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Performance evaluation of dry and epoxy jointed segmental prestressed box girders under monotonic and cyclic loading10.1016/j.conbuildmat.2012.09.068 ↗
2. Shear strength of joints in precast concrete segmental bridges
3. Finite-element analysis of shear-off failure of keyed dry joints in precast concrete segmental bridges10.1061/(ASCE)BE.1943-5592.0000669 ↗
4. Flexural behavior of precast concrete segmental beams with hybrid tendons and dry joints10.1016/j.conbuildmat.2016.02.003 ↗
5. Shear behavior of dry joints with castellated keys in precast concrete segmental bridges10.1061/(ASCE)BE.1943-5592.0000649 ↗
6. Shear behavior of joints in precast concrete segmental bridges10.1061/(ASCE)0733-9445(1990)116:12(3380) ↗
7. Shear strength of steel fiber-reinforced concrete dry joints in precast segmental bridges
8. Structural behavior of single key joints in precast concrete segmental bridge10.1061/(ASCE)1084-0702(2007)12:3(315) ↗
9. Shear strength of dry joints of concrete panels with and without steel fibers – application to precast segmental bridges10.1016/j.engstruct.2005.07.001 ↗
10. Shear tests on joints between precast post-tensioned units10.1680/macr.1959.11.31.25 ↗
11. Shear tests on very thin epoxy resin joints between precast concrete units
12. Ultimate load test of a segmentally constructed prestressed concrete I-beam10.15554/pcij.07011974.54.75 ↗
13. K. Koseki, J.E. Breen, Exploratory study of shear strength of joints for precast segmental bridges, FHWA, Center for Transportation Research, University of Texas, Austin, 1983, R.No.248-1.
14. Shear test on keyed joints between precast segments. Proc. of workshop AFPC, external PS in structures
15. Analytical study on the crack transition of concrete shear key10.1007/BF02481515 ↗
16. AASHTO, Guide specifications for design and construction of segmental concrete bridges. interim revisions, 2nd ed., 2003.
17. FEM study on the structural behavior of segmental concrete bridges with un-bonded prestressing and dry joints: simply supported bridges10.1016/j.engstruct.2005.04.011 ↗
18. Shear capacity of monolithic concrete joints without transverse reinforcement10.1680/macr.11.00107 ↗
19. Influence of the number of keys on the shear strength of post-tensioned dry joints10.3989/mc.2013.07611 ↗
20. Review on shear slip of shear keys in bridges
21. AASHTO-PCI-ASBI, Segmental box girder standards for span by span and balanced cantilever construction, 1997.
22. Standard specification for deformed and plain carbon-steel bars for concrete reinforcement
23. Standard specification for steel strand, uncoated seven wire for prestressed concrete
24. ASTM C33, Standard specification for concrete aggregates, ASTM Int., 2003.
25. Tests of epoxy-glued joints for a segmental precast bridge deck10.1016/0143-7496(82)90121-X ↗
26. Behaviors of segmental concrete box beams with internal tendons and external tendons under bending10.1016/j.engstruct.2012.09.005 ↗
27. AASHTO, AASHTO LRFD Bridge Design Specifications, 8th ed., 2017.
28. Experimental study on the shear transfer in joints of precast segmental bridge
29. FHWA, Post-tensioned box girder design manual, Corven Eng. Inc., 2016, R.No.FHWA-HIF-15-016.
30. C.L. Roberts, J.E. Breen, M.E. Kreger, Measurement based revisions for segmental bridge design and construction criteria, FHWA, Center for trans. R. university of TX, Austin, 1993, R.No.1234-3F.