Cracking of reinforced recycled aggregate concrete beams subjected to loads and steel corrosion
Source abstract
Abstract
Abstract The cracking behaviors of the reinforced recycled aggregate concrete (RAC) beams both on the beam surface and inside the beams were experimentally studied when subjected to loads coupled with chloride-induced corrosion and were compared to that of the natural aggregate concrete (NAC) beam. More transverse cracks caused by loads were observed on the surface of the RAC beam than on the NAC one and the average propagating height and width of these cracks were smaller compared to those on the NAC beam. Surface cracking caused by steel corrosion was found to initiate earlier and propagate faster on the RAC beams than on the NAC one, under loads together with chloride ingress, and the crack width was significantly larger. Inside the reinforced beams, the width of the load/corrosion-induced cracks was found to develop in certain speeds along their propagating paths; the width development models inside the beams were likely to explain the differences between the RAC and NAC beams in their cracking behaviors on the beam surfaces. It was also found that the cracking caused by loads and steel corrosion can influence each other mutually. Despite the acceptable resistance against the load-induced cracking of the RAC beams in terms of the crack width control, this paper suggests that RAC’s structural use in chloride environments should be taken with great caution, considering the serious corrosion cracking damages under loads coupled with chloride ingress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete Corrosion and Durability · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Cross-cultural comparison of concrete recycling decision-making and implementation in construction industry10.1016/j.wasman.2009.09.044 ↗
2. Construction waste characterisation for production of recycled aggregate–salvador/Brazil10.1016/S0713-2743(00)80092-6 ↗
3. Integrated interface parameters of recycled aggregate concrete10.1016/j.conbuildmat.2015.10.084 ↗
4. Using waste concrete as aggregate10.1016/0008-8846(95)00131-U ↗
5. Physical and mechanical properties of concretes produced with waste concrete10.1016/S0008-8846(97)00190-7 ↗
6. Influence of parent concrete on the properties of recycled aggregate concrete10.1016/j.conbuildmat.2008.03.006 ↗
7. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
8. Properties of concretes produced with waste concrete aggregate10.1016/j.cemconres.2003.12.019 ↗
9. Durability of recycled aggregates concrete: a safe way to sustainable development10.1016/j.cemconres.2004.02.009 ↗
10. Deformation properties and direct shear of medium strength concrete prepared with 100% recycled coarse aggregates10.1016/j.conbuildmat.2013.06.065 ↗
11. Performance evaluation of structural concrete using controlled quality coarse and fine recycled concrete aggregate10.1016/j.cemconcomp.2015.02.009 ↗
12. Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach10.1007/s10853-006-0379-y ↗
13. Performance of recycled aggregate concrete monitored by durability indexes10.1016/S0008-8846(01)00653-6 ↗
14. Comparative tests of beams and columns made of recycled aggregate concrete and natural aggregate concrete10.3151/jact.5.259 ↗
15. An experimental study on flexural strength of reinforced concrete beams with 100% recycled concrete aggregate10.1016/j.engstruct.2015.01.043 ↗
16. Flexural behavior of reinforced recycled concrete beams10.3151/jact.5.43 ↗
17. Performance of recycled concrete beams under sustained loads coupled with chloride ion (Cl−) ingress10.1016/j.conbuildmat.2016.10.028 ↗
18. Shape of corrosion-induced cracks in recycled aggregate concrete10.1016/j.corsci.2015.05.028 ↗
19. Stochastic service-life modeling of chloride-induced corrosion in recycled-aggregate concrete10.1016/j.cemconcomp.2014.09.003 ↗
20. Steel corrosion and corrosion-induced cracking in recycled aggregate concrete10.1016/j.corsci.2014.04.028 ↗
21. Crack width due to corroded bar in reinforced concrete structures
22. Cover cracking as a function of rebar corrosion: part 2-numerical model10.1007/BF02472864 ↗
23. Reinforcement corrosion and the deflection of RC beams-an experimental critique of current test methods10.1016/S0958-9465(02)00076-8 ↗
24. Interaction between loading, corrosion, and serviceability of reinforced concrete
25. Long-term performance of corrosion-damaged reinforced concrete beams
26. Interfacial transition zone in concrete10.1016/1065-7355(95)90037-3 ↗
27. Interfacial transition zone in cementitious materials10.1016/S0008-8846(00)00210-6 ↗