journal article·2019-06

Preparation and mechanical performance of annularly aligned steel fiber reinforced cement-based composite pipes

Ru Mu, Yan Xue, Longbang Qing, Hui Li, Yunlong Zhao, Jian Zhou, Junfeng Su

Publisher page

Abstract

Abstract Concrete pipes are widely used in municipal structures and vulnerable to cracking and leakage when subjected to external load. To improve the mechanical properties and hence increase the cracking resistance of the pipe, steel fiber reinforced cement-based composite pipe specimens with steel fibers annularly distributed along the circumferential direction of the pipe were prepared. In the preparation of the annularly aligned steel fiber reinforced cement-based composite (ASFRC) pipe specimens, an external circular magnetic field was applied to the fresh mixture of the steel fiber reinforced cement-based composite to drive the steel fibers rotating to the circumferential direction of the pipe when the mixture was compacted. The three-edge-bearing strength and ductility of the ASFRC and ordinary steel fiber reinforced cement-based composite (SFRC) pipes were tested and compared. The results showed that annularly aligned steel fibers can effectively improve the load carrying capacity and ductility of the pipe specimens, which can be attributed to the higher orientation efficiency factor of the steel fibers and the increase in the number of steel fibers on fractured section of ASFRC pipe specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Smart Materials for Construction · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Steel fiber reinforced concrete pipes. Part 1: technological analysis of the mechanical behavior
2. Design of macrosynthetic fibre reinforced concrete pipes10.1016/j.conbuildmat.2013.02.036 ↗
3. Rational finite element assisted design of precast steel fibre reinforced concrete pipes10.1016/j.engstruct.2016.06.014 ↗
4. Investigation of buried full-scale SFRC pipes under live loads10.1016/j.conbuildmat.2015.10.203 ↗
5. Effects of steel fibers and mineral filler on the water-tightness of concrete pipes10.1016/j.cemconcomp.2006.06.002 ↗
6. A comparative experimental investigation of concrete, reinforced-concrete and steel-fibre concrete pipes under three-edge-bearing test10.1016/j.conbuildmat.2006.05.031 ↗
7. Mechanical performance of full-scale precast steel fibre-reinforced concrete pipes10.1016/j.engstruct.2014.11.033 ↗
8. Full-scale pipes using dry-cast steel fibre-reinforced concrete10.1016/j.conbuildmat.2014.09.025 ↗
9. Structural performance of dry-cast rubberized concrete pipes with steel and synthetic fibers10.1016/j.conbuildmat.2014.12.061 ↗
10. Influence of the distribution and orientation of fibres in a reinforced concrete with waste fibres and powders10.1016/j.conbuildmat.2014.04.134 ↗
11. Distribution and orientation of fibers in steel fiber reinforced concrete
12. Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concrete10.1016/j.cemconres.2009.11.009 ↗
13. The efficiency of fibrous reinforcement of brittle matrices10.1088/0022-3727/4/11/318 ↗
14. Study on theoretical distribution rule of steel fiber in spun-cast concrete
15. Experiment of flexural-tensile properties of spun-cast SFRC
16. Aligning steel fibers in cement mortar using electro-magnetic field10.1016/j.conbuildmat.2016.11.081 ↗
17. A.G. Bayer, Process for producing a prepreg with aligned short fibres, DE 3641828 A1. 1988-06-16.
18. Aligned steel fibre reinforced cement-based composites (I), orientation control of steel fibres
19. Aligned steel fibre reinforced cement-based composites (II), preparation and reinforced of aligned steel fibres
20. Study of the distribution and orientation of fibers in SFRC specimens10.1007/BF02480572 ↗