Bonding quality of cross-laminated timber: Evaluation of test methods on Eucalyptus grandis panels
Source abstract
Abstract
The objectives of this study were (1) to analyse different testing methods for evaluating face-bonding quality of cross-laminated timber from Eucalyptus grandis timber bonded with a one component polyurethane adhesive and (2) to evaluate the effect of different processing variables on the face-bonding quality of cross-laminated panels. A 3 × 2 factorial design was used to test the effect of clamping pressure, wood density, and presence of stress relief grooves on the bonding quality. Two existing test methods from the EN 16351 standard and two recently developed test methods were used in the evaluation. Among them a combined delamination and shear test, seems to have potential to determine bond quality of cross-laminated timber panels since it evaluates both the durability and shear strength of a joint while minimising the effect of rolling shear. Complex failure behaviour in the different tests and various interactions between the factors evaluated (density, grooves, pressure) make it difficult to reach firm conclusions on the effect of each factor. In general though, the presence of grooves had a negative effect, both increasing the delamination and decreasing the shear strength (whatever the pressure and density used during processing). High clamping pressure was preferable, particularly when high density material was used. Wood density had a positive effect on shear strength when determined on dry specimens, and a negative effect on delamination. Results indicated that the production of Eucalyptus grandis cross-laminated timber could be possible and that face-bonding quality suitable for structural use could be achieved when using a clamping pressure of 0.7 MPa and with no stress relief grooves present.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Lignin and Wood Chemistry · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. G. Schickhofer, Starrer und nachgiebiger verbund bei geschichteten, flächenhaften Holzstrukturen (Ph.D thesis), Graz University of Technology, Austria, 1994. (In German).
2. Insights into the global cross-laminated timber industry
3. H. Plackner, Brettsperrholz wächst global. https://www.holzkurier.com/schnittholz/2015/02/brettsperrholz_waechstglobal.html, 2015 (last accessed 11/09/2018).
4. Cross laminated timber (CLT): overview and development10.1007/s00107-015-0999-5 ↗
5. The case for tall wood buildings
6. The genome of Eucalyptus grandis10.1038/nature13308 ↗
7. Jacobs · 1955
8. Malan · 1984
9. The wood properties and qualities of three South African-grown Eucalypt hybrids
10. The wood quality of the South African timber resource for high-value solid wood products and its role in sustainable forestry
11. H.F. Vermaas, M. Bariska, Collapse during low temperature drying of Eucalyptus grandis W and Pinus silvestris L, in: Proceedings IUFRO wood drying conference, Rotorua, New Zealand, 1994, pp. 141–150.
12. Wood property differences in South African grown Eucalyptus grandis trees of different growth stress intensity10.1515/hfsg.1987.41.6.331 ↗
13. Growth stress, its measurement and effects10.1080/00049158.2001.10676176 ↗
14. The relationship between longitudinal growth strain and the occurrence of gelatinous fibres in 10-and 11-year-old Eucalyptus globulus Labill10.1007/s00107-003-0388-3 ↗
15. Anatomical and chemical factors affecting tensile growth stress in Eucalyptus grandis plantations at different latitudes in Brazil10.1139/x11-161 ↗
16. The potential of young, green finger-jointed Eucalyptus grandis lumber for roof truss manufacturing10.2989/20702620.2015.1108618 ↗
17. Influence of processing parameters and wood properties on the edge gluing of green Eucalyptus grandis with a one-component PUR adhesive10.1007/s00107-018-1313-0 ↗
18. M. Nocetti, M. C. Barbu, M. Brunetti, M. Dugmore, M. Pröller, C. B. Wessels, The green gluing of Eucalyptus grandis boards as a processing phase to reduce drying defects in the semi-finished product, in: Proceedings of the 6th International Scientific Conference on Hardwood Processing (ISCHP2017), Lahti, Finland, September 25–28, 2017, pp. 140–147.
19. Investigating the potential of strength grading green Eucalyptus grandis lumber using multi-sensor technology10.15376/biores.12.4.9273-9286 ↗
20. Feasibility of manufacturing cross-laminated timber using fast-grown small diameter eucalyptus lumbers10.1016/j.conbuildmat.2016.12.027 ↗
21. Visual strength grading of Argentinean Eucalyptus grandis10.1007/s00107-003-0434-1 ↗
22. Comparison of newly proposed test methods to evaluate the bonding quality of cross- laminated timber (CLT) panels by means of experimental data and finite element (FE) analysis10.1016/j.conbuildmat.2016.08.113 ↗
23. Bonding quality of industrially produced cross-laminated timber (CLT) as determined in delamination tests10.1016/j.conbuildmat.2016.12.057 ↗
24. Integrity check of structural softwood glue lines: 680 correspondence between delamination and block shear test10.1007/s00107-014-0838-0 ↗
25. H.J. Blass, R. Gorlacher, Rolling shear in structural bonded timber elements, in: Proceedings of International Conference on Wood and Wood Fibre Composites, Stuttgart, Germany, 2000, pp. 327–337.
26. Shear performance of PUR adhesive in cross laminating of red pine10.5658/WOOD.2013.41.2.158 ↗
27. mechanical properties of Southern Pine cross-laminated timber
28. Hybrid cross-laminated timber plates with beech wood cross-layers10.1016/j.conbuildmat.2016.08.051 ↗
29. EN 16351, Timber structures, cross laminated timber, requirements, European standard, 2015.
30. Shear strength and durability testing of adhesive bonds in cross-laminated timber10.1080/00218464.2015.1094391 ↗
31. 1C-PUR-bonded hardwoods for engineered wood products: influence of selected processing parameters10.1007/s00107-014-0875-8 ↗
32. M. Mohamadzadeh, D. Hindman, Mechanical performance of yellow-poplar cross laminated timber, Report No. CE/VPI-ST-15-13, Virginia Polytechnic Institute and state University, https://vtechworks.lib.vt.edu/handle/10919/64863, 2015.
33. Quality control of glulam: shear testing of bond-lines10.1007/s00107-010-0456-4 ↗
34. R. Steiger, E. Gehri, The future of quality control for wood & wood products, The final conference of COST action E53, Edinburgh, 2010.
35. C. Lehringer, J Gabriel, Review of recent research activities on one-component PUR-adhesives for engineered wood products, in: S. Aicher, HW. Reinhardt, H. Garrecht (eds.), Materials and Joints in Timber Structures, RILEM book series, Dordrecht, 2014.10.1007/978-94-007-7811-5_37 ↗
36. Wetzig · 2009
37. Moisture-induced stresses and distortions in spruce cross-laminates and composite laminates10.1515/hf.2010.003 ↗
38. P. Mestek, S. Winter, Cross laminated timber (CLT)–reinforcements with self-tapping screws, in: WCTE – World Conference on Timber Engineering, Trentino, Italy, 2010.
39. Pröller · 2017
40. APA, The engineered wood association, Standard for performance-rated cross-laminated timber, ANSI/APA PRG 320, Tacoma, Washington, USA, 2012.
41. SANS 10149. South African national standard. The mechanical stress grading of softwood. Edition 1.2, 2002.
42. SANS 1783-2. South African national standard. Sawn softwood timber – Part 2: Stress-graded structural timber and timber for frame wall construction, 2005.
43. Henkel, LOCTITE® HB S159 PURBOND, Single-component polyurethane adhesive for the manufacture of engineered wood products, Technical data sheet, 2015.
44. Kuilen, Structural bonding of ash (Fraxinus excelsior L.): resistance to delamination and performance in shearing tests10.1007/s00107-014-0778-8 ↗
45. Influence of wood properties and bonding parameters on bond durability of European Beech (Fagus sylvatica L.) glulam10.1051/forest/2010002 ↗
46. EN 14358. Timber structures – calculation of characteristic 5-percentile values and acceptance criteria for a sample. European Committee for Standardization CEN, Bruxelles, 2007.
47. Measurement of rolling shear modulus and strength of cross laminated timber fabricated with black spruce10.1016/j.conbuildmat.2014.04.039 ↗
48. Bending properties of cross laminated timber (CLT) with a 45° alternating layer configuration
49. C. Frihart, C. Hunt, Adhesives with wood materials – bond formation and performance, in: wood handbook, Wood as an engineering material, U.S. department of agriculture, forest service, forest product laboratory, Madison, 2010, Chapter 10.
50. Review of growth and wood quality of plantation-grown Eucalyptus dunnii Maiden10.1080/00049158.2009.10676283 ↗