journal article·2019-08

Investigation of usability of quarry dust waste in fly ash-based geopolymer adhesive mortar production

Gökhan Kürklü, Gökhan Görhan

Publisher page

Abstract

Abstract Crushed-stone dust is a harmful waste product of crushed-stone aggregate concrete production. It has no added value and is disposed of by washing in well-organized facilities. This study experimentally investigated the geopolymer-based adhesive mortar in order to use crushed-stone dust as a building material at the best rates. Fly ash (FA) was used as the geopolymer binder and sodium silicate (SS) and NaOH were used as alkali activators. NaOH was used in three different molarities (3M, 6M and 12M). Two different materials were used as adhesive mortar mineral filler: 100% quarry dust and quarry dust mixed with silica sand at a ratio of 1/3. Geopolymer adhesive mortars were cured in an oven at 80 °C for 1, 3 and 5 h. Bulk density, apparent density, water absorption, apparent porosity, capillary water absorption, compressive strength, flexural strength, tensile adhesion and rheology experiments were performed on adhesive mortar specimens. All series had higher tensile adhesive strength than the standard. 100% of the waste material was used with the binder and mineral filler, and 33% silica sand addition made a positive contribution to some mortar properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Valorization of washing aggregate sludge and sewage sludge for lightweight aggregates production10.1016/j.conbuildmat.2016.04.095 ↗
2. Utilization of limestone dust for artificial stone production: an experimental approach10.1016/j.mineng.2003.10.031 ↗
3. A study on the partial replacement of coarse and fine aggregate by coconut shell and quarry dust mix
4. British Standards Institution · 1992
5. Utilisation of aggregate materials in road construction and bulk fill10.1016/S0921-3449(01)00067-2 ↗
6. Artificial aggregate made from waste stone sludge and waste silt10.1016/j.jenvman.2010.06.011 ↗
7. Stone crushers and dust problem
8. Optimum mix of quarry dust as partial replacement of fine aggregate in concrete
9. Effect of crushed stone dust on some properties of concrete10.1016/0008-8846(96)00078-6 ↗
10. Crushed stone waste as fine aggregate for concrete
11. Effect of quarry dust as partial replacement of sand in concrete
12. Elasticity and durability of concrete made with quarry rock dust and washed 10 mm washed gravel as aggregates
13. Effect of dust in coarse aggregates on reinforcement corrosion in concrete10.1016/j.conbuildmat.2009.08.030 ↗
14. Corrosion of reinforcement in concrete structures in the Middle East
15. Design and testing of artificial stone for the restoration of stone elements in monuments and historic buildings10.1016/j.conbuildmat.2015.05.063 ↗
16. Gooch · Encyclopedic dictionary of polymers · 2007 · 200 · 772
17. The hygrometric behaviour of some artificial stone materials used as elements of masonry walls10.1007/BF02480590 ↗
18. Investigation and conservation of artificial stone facades of the early XX century: a case study10.1016/j.conbuildmat.2012.11.103 ↗
19. Highway embankment design by using quarry dust
20. Effect of crushed sand and limestone crushed sand dust on the rheology of cement mortar
21. The production of synthetic aggregate from a quarry waste using an innovative style rotary kiln10.1177/0734242X0202000309 ↗
22. Shear strength studies on soil-quarry dust mixtures10.1007/s10706-005-1216-9 ↗
23. Compressive strength and water absorption characteristics of brick using quarry dust
24. High-strength concrete with different fine aggregate10.1016/S0008-8846(02)00860-8 ↗
25. Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars10.1016/j.cemconres.2004.06.039 ↗
26. Characterisation of rendering mortars by squeeze-flow and rotational rheometry10.1016/j.cemconres.2013.12.009 ↗
27. Parallel-plate rotational rheometry of cement paste: influence of the squeeze velocity during gap positioning10.1016/j.cemconres.2015.04.010 ↗
28. Influence of organic thickening admixtures on the rheological properties of mortars: relationship with water-retention10.1016/j.conbuildmat.2012.09.055 ↗
29. The influence of moisture on the deformability of cement–polymer adhesive mortar10.1016/j.conbuildmat.2010.12.004 ↗
30. Influence of sintering temperature of a ceramic substrate in mortar adhesion for civil construction10.1016/j.jobe.2018.05.026 ↗
31. Investigation of interfacial fracture toughness between concrete and adhesive mortar in an external wall tile structure10.1016/j.ijadhadh.2009.06.005 ↗
32. Bond strength and transversal deformation aging on cement-polymer adhesive mortar10.1016/j.conbuildmat.2008.05.019 ↗
33. Influence of shrinkage and water transport mechanisms on microstructure and crack formation of tile adhesive mortars10.1016/j.cemconres.2011.07.007 ↗
34. Influence of incorporation of glass waste on the rheological properties of adhesive mortar10.1016/j.conbuildmat.2017.04.208 ↗
35. Effect of fly ash addition on the mechanical properties of tile adhesive10.1016/j.conbuildmat.2004.08.007 ↗
36. Effects of fly ash microsphere on rheology, adhesiveness and strength of mortar10.1016/j.conbuildmat.2013.01.015 ↗
37. Evaluation of various cellulose ethers performance in ceramic tile adhesive mortars10.1016/j.ijadhadh.2012.09.007 ↗
38. Viscosity-enhancing admixtures for cement-based materials—an overview10.1016/S0958-9465(98)80006-1 ↗
39. Effect of polysaccharides on the hydration of cement paste at early ages10.1016/j.cemconres.2004.04.001 ↗
40. HPMC and HEMC influence on cement hydration10.1016/j.cemconres.2005.08.003 ↗
41. Time-resolved monitoring of cement hydration: Influence of cellulose ethers on hydration kinetics10.1016/j.nimb.2005.06.026 ↗
42. Current understanding of cellulose ethers impact on the hydration of C3A and C3A-sulphate systems10.1016/j.cemconres.2009.05.009 ↗
43. Cellulose ethers10.1021/ie50341a011 ↗
44. Impact on mechanical properties of cement sand mortar containing waste granite powder10.1016/j.conbuildmat.2018.09.203 ↗
45. Effect of formulation parameters on adhesive properties of ANSI 118–15 and 118–11 compliant tile adhesive mortars10.1016/j.ijadhadh.2015.12.011 ↗
46. Physico-chemical characterization of EVA-modified mortar and porcelain tiles interfaces10.1016/j.cemconres.2009.07.020 ↗
47. Changes in microstructures and physical properties of polymer-modified mortars during wet storage10.1016/j.cemconres.2005.06.001 ↗
48. Bottom ash from biomass combustion in BFB and its use in adhesive-mortars10.1016/j.fuproc.2014.09.015 ↗
49. Composites of scrap tire rubber particles and adhesive mortar–Noise insulation potential10.1016/j.cemconcomp.2017.05.007 ↗
50. A review on properties of fresh and hardened geopolymer mortar10.1016/j.compositesb.2018.06.031 ↗
51. The potential use of geopolymeric materials to immobilise toxic metals: Part II. Material and leaching characteristics10.1016/S0892-6875(98)00121-6 ↗
52. Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature10.1016/j.jmatprotec.2009.03.016 ↗
53. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash10.1016/j.conbuildmat.2016.08.097 ↗
54. Resource recovery from coal fly ash waste: an overview study10.2109/jcersj2.116.167 ↗
55. Workability and strength of coarse high calcium fly ash geopolymer10.1016/j.cemconcomp.2006.11.002 ↗
56. Design of fly ash geopolymer concrete mix proportions using Multivariate Adaptive Regression Spline model10.1016/j.conbuildmat.2018.01.175 ↗
57. Utilization of radioactive high-calcium Mongolian flyash for the preparation of alkali-activated geopolymers for safe use as construction materials10.1016/j.ceramint.2014.07.157 ↗
58. An experimental investigation on flyash-based geopolymer mortar under different curing regime for thermal analysis10.1016/j.enbuild.2016.12.079 ↗
59. Effects of recycled sand on the properties and durability of polymer and cement based mortars10.1016/j.conbuildmat.2017.07.029 ↗
60. ASTM Committee · 2017
61. TSE EN 772-4 · 2000
62. TS EN 771-1 · 2015
63. TS 4045 · 1984
64. Janz · 1997
65. TS EN 196-1 · 2016
66. TS EN 12004-2 · 2017
67. TS EN 14411 · 2016
68. TS EN 12004-1 · 2017
69. Utilization of marble powder as fine aggregate in mortar mixes10.1016/j.conbuildmat.2018.01.061 ↗
70. Influence of cements containing calcareous fly ash as a main component properties of fresh cement mixtures