Photocatalytic NOx abatement and self-cleaning performance of cementitious composites with g-C3N4 nanosheets under visible light
Source abstract
Abstract
Abstract The combination of photocatalyst with cementitious materials for air pollution abatement and self-cleaning has gained considerable attention. However, the most popularly used photocatalytic cementitious composites based on TiO2 achieve the purification function under ultraviolet sunlight, significantly impeding a broader application of photocatalytic cementitious composites. Here, the photocatalytic cementitious composites were prepared by incorporating g-C3N4 nanosheets (CNNs) in Portland cement. With the increase of CNNs content, the photocatalytic NOx abatement and self-cleaning performance was notably improved, while the micro-hardness of cementitious composites increased first and then decreased. Among the three mixing dosages (0.5%, 1% and 2% by weight of cement), the cementitious composite admixed with 2% CNNs showed the highest photocatalytic NOx abatement efficiency of 227.3 μmol m−2 h−1, and could degrade the rhodamine B within 40 min under visible light. Additionally, its microscopic hardness was 5.4% higher than the one without CNNs, suggesting that a moderate amount of CNNs (below 2%) in cementitious composites was effective in achieving an improved photocatalytic depollution performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Zn-Al layered double hydroxides as efficient photocatalysts for NOx abatement10.1016/j.cej.2018.04.022 ↗
2. TiO2/graphene composite photocatalysts for NOx removal: a comparison of surfactant-stabilized graphene and reduced graphene oxide10.1016/j.apcatb.2015.07.009 ↗
3. Atmospheric NOx removal: study of cement mortars with iron-and vanadium-doped TiO2 as visible light–sensitive photocatalysts10.1016/j.conbuildmat.2017.05.132 ↗
4. An overview of photocatalysis phenomena applied to NOx abatement10.1016/j.jenvman.2013.08.006 ↗
5. Photocatalytic NOx abatement by calcium aluminate cements modified with TiO2: Improved NO2 conversion10.1016/j.cemconres.2015.01.011 ↗
6. Synergistic effect of UV pretreated Fe-ZSM-5 catalysts for heterogeneous catalytic complete oxidation of VOC: a technology development for sustainable use10.1016/j.jhazmat.2017.07.019 ↗
7. Nano-TiO2-based architectural mortar for NO removal and bacteria inactivation: Influence of coating and weathering conditions10.1016/j.cemconcomp.2012.08.006 ↗
8. Long term self-cleaning and photocatalytic performance of anatase added mortars exposed to the urban environment10.1016/j.conbuildmat.2015.08.028 ↗
9. Degradation of NO using photocatalytic coatings applied to different substrates10.1016/j.buildenv.2011.03.001 ↗
10. Highly active photocatalytic paint for NOx abatement under real-outdoor conditions10.1016/j.apcata.2014.07.005 ↗
11. Photocatalytic NO removal of concrete surface layers intermixed with TiO210.1016/j.buildenv.2013.08.017 ↗
12. Titanium dioxide coated cementitious materials for air purifying purposes: preparation, characterization and toluene removal potential10.1016/j.buildenv.2009.09.003 ↗
13. Limestones coated with photocatalytic TiO2 to enhance building surface with self-cleaning and depolluting abilities10.1016/j.jclepro.2017.07.193 ↗
14. Photocatalytic activity and stability of TiO2/ZnAl layered double hydroxide based coatings on mortar substrates10.1016/j.cemconcomp.2014.12.015 ↗
15. Photocatalytic concretes—The interface between photocatalysis and cement chemistry10.1016/j.cemconres.2016.03.007 ↗
16. A metal-free polymeric photocatalyst for hydrogen production from water under visible light10.1038/nmat2317 ↗
17. Highly efficient photocatalytic H2 evolution from water using visible light and structure-controlled graphitic carbon nitride10.1002/anie.201403375 ↗
18. Visible-light-driven CO2 reduction with carbon nitride: enhancing the activity of ruthenium catalysts10.1002/anie.201411170 ↗
19. Graphitic carbon nitride (g-C3N4) nanocomposites: a new and exciting generation of visible light driven photocatalysts for environmental pollution remediation10.1016/j.apcatb.2016.05.052 ↗
20. Graphitic carbon nitride (g-C3N4)-based photocatalysts for artificial photosynthesis and environmental remediation: are we a step closer to achieving sustainability?10.1021/acs.chemrev.6b00075 ↗
21. Enhanced visible-light-driven photocatalytic performance of porous graphitic carbon nitride10.1016/j.apsusc.2015.08.124 ↗
22. Effect of processing temperature on structure and photocatalytic properties of g-C3N410.1016/j.apsusc.2015.08.097 ↗
23. Activation of graphitic carbon nitride (g-C3N4) by alkaline hydrothermal treatment for photocatalytic NO oxidation in gas phase10.1039/c3ta10472a ↗
24. Graphene-like carbon nitride nanosheets for improved photocatalytic activities10.1002/adfm.201200922 ↗
25. K. Schwinghammer, M.B. Mesch, V. Duppel, C. Ziegler, J.r. Senker, B.V. Lotsch, Crystalline carbon nitride nanosheets for improved visible-light hydrogen evolution, J. Am. Chem. Soc. 136(5) (2014) 1730-1733.10.1021/ja411321s ↗
26. New g-C3N4 based photocatalytic cement with enhanced visible-light photocatalytic activity by constructing muscovite sheet/SnO2 structures10.1016/j.conbuildmat.2018.05.146 ↗
27. Facile one step method realizing scalable production of g-C3N4 nanosheets and study of their photocatalytic H2 evolution activity10.1039/C4TA04487H ↗
28. Durability and cementing efficiency of fly ash in concretes10.1016/j.conbuildmat.2011.12.026 ↗
29. Influence of lead, zinc, iron (III) and chromium (III) oxides on the setting time and strength development of Portland cement10.1016/S0008-8846(01)00545-2 ↗
30. A porosimetric study of calcium sulfoaluminate cement pastes cured at early ages10.1016/j.cemconres.2006.02.014 ↗
31. Mercury porosimetry of hardened cement pastes10.1016/S0008-8846(99)00083-6 ↗
32. Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene10.1088/0957-4484/20/12/125705 ↗
33. Modification effects of colloidal nanoSiO2 on cement hydration and its gel property10.1016/j.compositesb.2012.05.056 ↗
34. Superior photocatalytic NOx removal of cementitious materials prepared with white cement over ordinary Portland cement and the underlying mechanisms10.1016/j.cemconcomp.2018.03.020 ↗
35. Photocatalytic cement-based materials: Comparison of nitrogen oxides and toluene removal potentials and evaluation of self-cleaning performance10.1016/j.buildenv.2011.03.004 ↗
36. Dispersion and stability of graphene nanoplatelet in water and its influence on cement composites10.1016/j.conbuildmat.2018.02.046 ↗
37. Effects of different nanomaterials on hardening and performance of ultra-high strength concrete (UHSC)10.1016/j.cemconcomp.2016.03.003 ↗
38. Hydration of cementitious materials, present and future10.1016/j.cemconres.2011.03.026 ↗
39. A new approach in quantitative in-situ XRD of cement pastes: Correlation of heat flow curves with early hydration reactions10.1016/j.cemconres.2010.09.014 ↗
40. The early hydration of Ordinary Portland Cement (OPC): An approach comparing measured heat flow with calculated heat flow from QXRD10.1016/j.cemconres.2011.09.001 ↗
41. The influence of carbon nanotubes on the fracture energy, flexural and tensile behavior of cement based composites10.1016/j.conbuildmat.2019.03.003 ↗
42. Effect of silicon carbide nanowhiskers on hydration and mechanical properties of a Portland cement paste10.1016/j.conbuildmat.2018.02.185 ↗
43. Enhancing mechanisms of multi-layer graphenes to cementitious composites10.1016/j.compositesa.2017.06.016 ↗
44. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
45. Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques10.1016/j.cemconres.2009.01.017 ↗
46. Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica10.1016/j.conbuildmat.2014.02.039 ↗
47. Influence of sodium hydroxide on the performance and hydration of lime-based low carbon cementitious materials10.1016/j.conbuildmat.2018.12.102 ↗
48. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
49. Impact of chloride-rich environments on cement paste mineralogy10.1016/j.cemconres.2014.10.017 ↗
50. A study of cement Type II hydration partially substituted by Brazilian spent cracking catalyst fines10.1007/s10973-017-6461-7 ↗
51. Experimental study on mechanical and microstructural properties of cement-based paste for shotcrete use in high-temperature geothermal environment10.1016/j.conbuildmat.2018.04.106 ↗
52. One-step synthesis of honeycomb-like carbon nitride isotype heterojunction as low-cost, high-performance photocatalyst for removal of NO10.1021/acssuschemeng.8b02536 ↗
53. Fabrication of graphitic-C3N4 quantum dots/graphene-InVO4 aerogel hybrids with enhanced photocatalytic NO removal under visible-light irradiation10.1016/j.apcatb.2018.04.080 ↗
54. TiO2-containing cement pastes and mortars: measurements of the photocatalytic efficiency using a rhodamine B-based colourimetric test10.1016/j.solener.2009.05.017 ↗