Effect of activators on hybrid alkaline binder based on tungsten mining waste and ground granulated blast furnace slag
Source abstract
Abstract
Abstract This article illustrates the effects of different combinations of alkaline activator solutions (sodium silicate “SS”, sodium hydroxide, potassium hydroxide and dissolved waste glass powder in sodium hydroxide) as well as their concentrations and the Solid/Liquid ratios on the compressive strength development, and the microstructure of hybrid alkaline binder. The current study used a combination of tungsten mining waste mud (TMWM) (90 vt.%) and ground granulated blast furnace slag (GGBFS) (10 vt.%) as precursors. The obtained hybrid alkaline binder specimens were submitted by compressive strength tests. It was found out that the alkaline activator (KOH when mixed with SS) improves the compressive strength of the hybrid alkaline binders compared to the alkaline activator (NaOH mixed with SS), which depends on the presence of alkali metal K+ and Na+ cations. Moreover, the samples prepared by the alkaline activator (dissolved waste glass powder in NaOH mixed with SS) giving the highest compressive strength of about 32.8 MPa at 28 days. From the results of XRD, TGA-DTGA, FTIR analyses, and the obtained microstructures of the hybrid alkaline binders it indicates the existence of a different reaction product formed during the alkaline activation such as C-S-H, N-A-S-H, C-A-S-H, and K-A-S-H type cementitious gels. In addition to these conventional gels, there was a formation of a complex mixture of (C, M)-A-S-H cementitious gels were (M = K, Na). The pore structure of hybrid alkaline binder was evaluated through mercury intrusion porosimetry (MIP). The pore structure of specimens was characterised by the total porosity, average pore diameter, pore size distribution as well as characteristic pore sizes. The MIP results indicate that the type of alkaline activators, solid/liquid ratios and the alkaline activators’ concentration have a specific impact on all characteristics of the pore structure of all the hybrid alkaline binders. Finally, the cost impact on the compressive strength for different activators was also analysed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Hybrid Alkaline Cements. Part I: fundamentals
2. Durability assessment of alkali activated slag (AAS) concrete10.1617/s11527-012-9842-1 ↗
3. Properties of cementless mortars activated by sodium silicate10.1016/j.conbuildmat.2007.07.003 ↗
4. Hybrid Alkaline Cements. Part II: The Clinker Factor
5. Carbonation process of alkali-activated slag mortars10.1007/s10853-005-1821-2 ↗
6. F. Puertas, C. Varga, M. Palacios, B. Pellerin, C. Eychenne-Baron, D. Babayan, P. Boustingorry, I. Elkhadiri, Alkali-Activation of Slag Cements : Activation Process , Microstructure and Mechanical Properties, in: 13th Int. Congr. Chem. Cem., no. July 2011, pp. 1–7, 2011.
7. Hybrid Alkaline Cements. Part III. Durability and Industrial Applications
8. Preparation and characterization of a hybrid alkaline binder based on a fly ash with no commercial value10.1016/j.jclepro.2015.05.044 ↗
9. Alkali-activated Portland blast-furnace slag cement: Mechanical properties and hydration10.1016/j.conbuildmat.2017.02.092 ↗
10. Hydration kinetics in hybrid binders: early reaction stages10.1016/j.cemconcomp.2013.03.025 ↗
11. Red clay brick and tungsten mining waste-based alkali-activated binder: microstructural and mechanical properties10.1016/j.conbuildmat.2018.09.153 ↗
12. F. Pacheco-Torgal, J. P. Castro-Games, S. Jalali, Alkali activated geopolymeric binder using Tungsten mine waste: preliminary investigation, Geopolymer, Green Chem. Sustain. Dev. Solut., pp. 93–98, 2005.
13. Investigations about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders10.1016/j.cemconres.2007.02.006 ↗
14. A review on mineral waste for chemical-activated binders: mineralogical and chemical characteristics
15. Tungsten mine waste geopolymeric binder: preliminary hydration products investigations10.1016/j.conbuildmat.2008.01.003 ↗
16. Investigations of tungsten mine waste geopolymeric binder: strength and microstructure10.1016/j.conbuildmat.2007.08.003 ↗
17. M. Criado, W. Aperador, I. Sobrados, Microstructural and mechanical properties of alkali activated Colombian raw materials, Materials (Basel) 9(3) (2016).10.3390/ma9030158 ↗
18. Thermal behavior of vibrational phonons and hydroxyls of muscovite in dehydroxylation : in situ high-temperature infrared spectroscopic investigations10.2138/am.2010.3472 ↗
19. Purification of talcs by chlorination and leaching10.1016/j.minpro.2011.09.006 ↗
20. Properties and microstructure of alkali-activated slag cement cured at below- And about-normal temperature10.1016/j.conbuildmat.2014.12.068 ↗
21. A study of thermal decomposition of phases in cementitious systems using HT-XRD and TG10.1016/j.conbuildmat.2018.03.001 ↗
22. Characterization of supplementary cementitious materials by thermal analysis10.1617/s11527-016-0909-2 ↗
23. Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers10.1016/S0301-7516(02)00013-3 ↗
24. Effect of silicate activator ph on the leaching and material characteristics of waste-based inorganic polymers10.1016/S0892-6875(01)00002-4 ↗
25. Comparison of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical Properties10.4028/www.scientific.net/MSF.803.179 ↗
26. Synthesis of thermostable geopolymer from circulating fluidized bed combustion (CFBC) bottom ashes10.1016/j.jhazmat.2009.09.149 ↗
27. Effects of waste glass on alkali-activated tungsten mining waste: composition and mechanical properties10.1617/s11527-017-1062-2 ↗
28. Geopolymers prepared from DC plasma treated air pollution control (APC) residues glass : properties and characterisation of the binder phase10.1016/j.jhazmat.2011.08.081 ↗
29. Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production10.1016/j.psep.2016.08.001 ↗
30. Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures10.1016/j.cemconres.2007.08.021 ↗
31. Preparation and characterization of new geopolymer-epoxy resin hybrid mortars10.3390/ma6072989 ↗
32. Thermal stability of C-S-H phases and applicability of Richardson and Groves’ and Richardson C-(A)-S-H(I) models to synthetic C-S-H10.1016/j.cemconres.2016.12.005 ↗
33. Assessment of phase formation in alkali activated low and high calcium fly ashes in building materials10.1016/j.conbuildmat.2009.11.007 ↗
34. Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions10.1016/j.cemconres.2014.10.015 ↗
35. T. Pyatina, T. Sugama, Role of tartaric acid in chemical, mechanical and self-healing behaviors of a calcium-aluminate cement blend with fly ash f under steam and alkali carbonate environments at 270 °c, Materials (Basel), 10(4) (2017).10.3390/ma10040342 ↗
36. Muscovite dehydroxylation: high temprature studies
37. Determination of activation effect of Ca(OH)2 upon the hydration of BFS and related heat by isothermal calorimeter10.1007/s10973-010-0849-y ↗
38. Material and structural characterization of alkali activated low-calcium brown coal fly ash10.1016/j.jhazmat.2009.02.089 ↗
39. Red clay brick and tungsten mining waste-based alkali-activated binder: Microstructural and mechanical properties10.1016/j.conbuildmat.2018.09.153 ↗
40. Alternative cements based on alkali-activated red clay brick waste10.1016/j.conbuildmat.2016.10.023 ↗
41. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
42. Infra-red spectra of some selected minerals, rocks and products10.1007/BF00552894 ↗
43. Chemical acceleration of a neutral granulated blast-furnace slag activated by sodium carbonate10.1016/j.cemconres.2015.02.014 ↗
44. Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes10.1016/S0958-9465(02)00059-8 ↗
45. Effect of alkalis on fresh C – S – H gels. FTIR analysis10.1016/j.cemconres.2009.01.003 ↗
46. I. Garcıa-Lodeiro, A. Fernández-Jiménez, M. T. Blanco, A. Palomo, FTIR study of the sol – gel synthesis of cementitious gels : C – S – H and N – A – S – H, J. Sol-Gel Sci. Technol., pp. 63–72, 2008.10.1007/s10971-007-1643-6 ↗
47. Structure of Calcium Silicate Hydrate (C-S-H): Near-, Mid-, and Far-Infrared Spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
48. Synthesis and thermal behavior of geopolymer-type material from waste ceramic10.1016/j.conbuildmat.2013.08.063 ↗
49. Synthesis of inorganic polymers using fly ash and primary lead slag10.1016/j.jhazmat.2011.12.039 ↗
50. Valorization of construction and demolition (C&D) and industrial wastes through alkali activation10.1016/j.conbuildmat.2016.06.051 ↗
51. Effect of surfactant types and their concentration on the structural characteristics of nanoclay10.1016/j.saa.2013.11.076 ↗
52. Minerals from Macedonia. XXI. Vibrational spectroscopy as identificational tool for some phyllosilicate minerals
53. Identification of clay minerals and micas in sedimentary rocks
54. Synthesis and characteristics of fly ash and bottom ash based geopolymers-A comparative study10.1016/j.ceramint.2013.10.012 ↗
55. Reaction progress of alkaline-activated metakaolin-ground granulated blast furnace slag blends10.1007/s10853-009-3790-3 ↗
56. A weak alkali bond in (N, K)-A-S-H gels: Evidence from leaching and modeling
57. Multi-scale modeling and experimental investigations of geopolymeric gels at elevated temperatures10.1016/j.compstruc.2013.01.005 ↗
58. Effect on fresh C-S-H gels of the simultaneous addition of alkali and aluminium10.1016/j.cemconres.2009.08.004 ↗
59. Effect of Calcium Additions on N-A–S–H Cementitious Gels ́10.1111/j.1551-2916.2010.03668.x ↗
60. Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars10.1016/j.conbuildmat.2011.10.063 ↗
61. Role of slag in microstructural development and hardening of fly ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
62. Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O10.1016/j.cemconres.2011.05.006 ↗
63. Variation in hybrid cements over time. Alkaline activation of fl y ash – portland cement blends10.1016/j.cemconres.2013.03.022 ↗
64. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
65. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
66. Y. Luna-Galianoa, C. Fernández-Pereiraa, M. Izquierdo, Contributions to the study of porosity in fly ash-based geopolymers. Relationship between degree of reaction, porosity and compressive strength, Mater. Construcción, 66(324) (2016).10.3989/mc.2016.10215 ↗
67. Mercury porosimetry: An inappropriate method for the measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
68. IUPAC, Manual of symbols and terminology, appendix 2, part 1, Colloid and Surface Chemistry, Pure Appl. Chem., 31 (1972)
69. Effect of pore size distribution on drying shrinking of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
70. Pore structure characterization of cement pastes blended with high-volume fly-ash10.1016/j.cemconres.2011.09.012 ↗
71. Quantitative prediction of permeability in porous rock
72. Water permeability and chloride ion diffusion in Portland cement mortars: relationship to sand content and critical pore diameter10.1016/0008-8846(95)00069-O ↗
73. Water permeability and chloride ion diffusion in portland cement mortars: relationship to sand content and critical pore diameter10.1016/0008-8846(95)00069-O ↗
74. Prediction of rock electrical conductivity from mercury injection measurements10.1029/JB092iB01p00599 ↗