journal article·2020-04

Relations between colloidal indices and low-temperature properties of reclaimed binder modified with softer binder, oil-rejuvenator and polybutadiene rubber

Ali Mansourkhaki, Mahmoud Ameri, Mahdi Habibpour, B. Shane Underwood

Publisher page

Abstract

Abstract Asphalt binder properties play an important role in the behavior of asphalt concrete pavements at low temperature and should be studied using laboratory tests. This research investigates the relationship between chemical properties and low-temperature performance of asphalt binders at RAP contents of 15%, 30%, 50 and 100% by weight. The asphalt is also modified with a softer binder, oil rejuvenator and polybutadiene rubber (PBR 1220) modified binder. Binder testing includes penetration test, softening point, bending beam rheometer (BBR) and Fraass breaking point. Moreover, saturate, aromatic, resin, and asphaltene (SARA) fractionation is used to study the induced changes in the chemical composition of binders after adding RAP. The results show that binders modified with oil-rejuvenator have better resistance to low temperature cracking in comparison with softer binder and polymer modified binder (PMB), particularly at high percentages of RAP. Using a softer virgin binder also demonstrates improvements in the low-temperature performance of RAP binder. Moreover, PBR 1220 blended with RAP binder showed poor resistance to low-temperature cracking, it means that having a low Tg (for polymer) would not necessarily lead to a good low temperature cracking of the polymer-modified binder. Finally, some promising statistical correlations are found between colloidal indices and low-temperature performance of samples with RAP content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Performance evaluation of asphalt mixtures with reclaimed asphalt pavement and recycled asphalt shingles in Missouri10.1177/0361198119825638 ↗
2. A. Copeland, “Reclaimed asphalt pavement in asphalt mixtures: State of the practice,” 2011
3. Ageing and rejuvenators: evaluating their impact on high RAP mixtures fatigue cracking characteristics using advanced mechanistic models and testing methods10.1080/14680629.2015.1076996 ↗
4. Characterizing Temperature Performance of Bio-Modified Binders Containing RAP Binder10.1061/(ASCE)MT.1943-5533.0002373 ↗
5. Performance Evaluation of Slurry Seals Containing Reclaimed Asphalt Pavement10.1177/0361198118821908 ↗
6. Chemical and rheological evaluation of asphalts incorporating RAP/RAS binders and warm-mix technologies in relation to crack resistance10.1016/j.conbuildmat.2018.11.122 ↗
7. H. Majidifard, N. Tabatabaee, W. Buttlar, Effect of bio-based oil on performance of high-RAP mixtures, 2018.
8. Effect of reclaimed asphalt and virgin binder on rheological properties of binder blends
9. Influence of RAP sources and proportions on fracture and low temperature cracking performance of polymer modified binder10.1016/j.conbuildmat.2016.05.094 ↗
10. K. R. Hansen and A. Copeland, Asphalt Pavement Industry Survey on Recycled Materials and Warm-Mix Asphalt Usage, vol. 138, 6th ed, pp. 1–40, 2015.
11. Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement and crumb rubber10.1016/j.jclepro.2017.07.079 ↗
12. AASHTO, Standard Specification for Superpave Volumetric Mix Design, Aashto M323-12, pp. 1–11, 2012
13. Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures
14. Relationship between laboratory and full-scale fatigue performance of asphalt mixtures containing recycled materials10.1617/s11527-019-1327-z ↗
15. Y. D. Wang, A. Ghanbari, B. S. Underwood, and Y. R. Kim, “Development of a Performance-Volumetric Relationship for Asphalt Mixtures,” Transp. Res. Rec. 2673 (6) (2019) 416–430. https://doi.org/10.1177/0361198119845364.10.1177/0361198119845364 ↗
16. A viscoelastic-based model for predicting the strength of asphalt concrete in direct tension10.1016/j.conbuildmat.2016.06.089 ↗
17. Investigating short-term and long-term binder performance of high-RAP mixtures containing waste cooking oil
18. Short-and long-term rheological and chemical characteristics of nanomodified asphalt binder10.1080/10916466.2019.1602635 ↗
19. Application of rejuvenators and virgin bitumen to restore physical and rheological properties of RAP binder10.1080/14488353.2017.1383580 ↗
20. Improving fatigue and low temperature performance of 100 % RAP mixtures using a soybean-derived rejuvenator10.1016/j.conbuildmat.2017.06.099 ↗
21. Investigation of the impacts of aging and RAP percentages on effectiveness of asphalt binder rejuvenators10.1016/j.conbuildmat.2016.02.013 ↗
22. Understanding effects of RAP on rheological performance and chemical composition of SBS modified binder using series of laboratory tests10.1016/j.ijprt.2016.06.002 ↗
23. Investigation of the impacts of aging and RAP percentages on effectiveness of asphalt binder rejuvenators
24. Aging effect on rheology and cracking behaviour of reclaimed binder with bio-based rejuvenators10.1016/j.jclepro.2018.03.305 ↗
25. M. Nakhaei, K. Naderi, A. A. Nasrekani, and D. H. Timm, Chemical, Rheological, and Moisture Resistance Properties of Warm Mix Asphalt Modified with Polyethylene-Way and Ethylene-Bis-Stearamide Additives, 2018.
26. Selection of structural overlays using asphalt mixture performance10.1061/(ASCE)MT.1943-5533.0002070 ↗
27. Evaluation of rejuvenator’s effectiveness with conventional mix testing for 100% reclaimed asphalt pavement mixtures10.3141/2370-03 ↗
28. New additive for use in hot in-place recycling to improve performance of reclaimed asphalt pavement mix10.3141/2445-05 ↗
29. Influence of soft bitumens on the chemical and rheological properties of reclaimed polymer-modified binders from the ‘old’ surface-layer asphalt10.1016/j.conbuildmat.2015.01.002 ↗
30. Fatigue performance analysis of pavements with RAP using viscoelastic continuum damage theory10.1007/s12205-018-2648-0 ↗
31. F. Leiva-Villacorta, R. E. Villegas-Villegas, J. P. Aguiar-Moya, J. Salazar-Delgado, and L. G. Lor\’\ia-Salazar, Effect of aging on rheological, chemical and thermodynamic properties of asphalt components, 2013
32. Robert · 2000
33. Bitumen in colloid science: a chemical, structural and rheological approach10.1016/S0016-2361(98)00054-4 ↗
34. J.-M. Shiau, M. Tia, B. E. Ruth, and G. C. Page, Characterization of age-hardening potential of asphalts by using Corbett-Swarbrick asphalt fractionation test, Transp. Res. Rec., no. 1323, 1991.
35. I. L. Al-Qadi, M. Elseifi, and S. H. Carpenter, Reclaimed asphalt pavement—a literature review, 2007
36. R. Willis and N. H. Tran, Bring Life Back to Aging, Asph. Pavement Mag., pp. 36–41, 2015.
37. M. A. Elseifi, L. N. Mohammad, and S. B. COOPER III, Laboratory evaluation of asphalt mixtures containing sustainable technologies, Asph. paving Technol., no. 80, pp. 227–244, 2011.
38. Impacts of rejuvenators on performance and engineering properties of asphalt mixtures containing recycled materials10.1016/j.conbuildmat.2013.12.025 ↗
39. “Resources, Conservation and Recycling Are totally recycled hot mix asphalts a sustainable alternative for road paving ?”, “Resources10.1016/j.resconrec.2011.11.013 ↗
40. Composition of asphalt based on generic fractionation, using solvent deasphaltening, elution-adsorption chromatography, and densimetric characterization10.1021/ac60273a004 ↗
41. Ageing characteristics of RAP binder blends–what types of RAP binders are suitable for multiple recycling?10.1080/14680629.2014.926625 ↗
42. Chemical and rheological analysis of modified bitumens blended with ‘artificial reclaimed bitumen’10.1016/j.conbuildmat.2014.03.047 ↗
43. “Using additives and modifiers in hot mix asphalt
44. J. Oliveira, H. M. R. D. da Silva, and C. M. G. Jesus, “Asphalt mixtures produced with 100% reclaimed materials,” in 1st International Conference WASTES: Solutions, Treatments and Opportunities, 2011, pp. 30–35.
45. Investigation of bitumen low temperature properties using a dynamic shear rheometer with 4 mm parallel plates
46. The industrial production and use of 1, 3-butadiene10.1289/ehp.90867 ↗
47. H. D. Brandt et al., Rubber , 5 . Solution Rubbers, Ullmann’s Encycl. Ind. Chem., pp. 649–680, 2012.10.1002/14356007.o23_o02 ↗
48. Investigation of bitumen low temperature properties using a dynamic shear rheometer with 4 mm parallel plates10.1016/j.ijprt.2016.08.010 ↗
49. E. N. 12593, Bitumen and bituminous binders. Determination of the Fraass breaking point. European committee for standardization Brussels, 1999.
50. “Low-Temperature Performance of Toner-Modified Asphalt Binder10.1061/JPEODX.0000123 ↗
51. Investigating the influence of SBS and Gilsonite on the rheological properties of asphalt binder using statistical analysis
52. ASTM D 6648-08, “Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR),” Annu. B. Am. Soc. Test. Mater. ASTM Stand., vol. 04, no. C, pp. 1–14, 2012.
53. Influence of asphaltene content on mechanical bitumen behavior: experimental investigation and micromechanical modeling10.1617/s11527-014-0383-7 ↗
54. M. Paliukaite, A. Vaitkus, and A. Zofka, “Evaluation of bitumen fractional composition depending on the crude oil type and production technology,” in Environmental Engineering. Proceedings of the International Conference on Environmental Engineering. ICEE, 2014, vol. 9, p. 1.10.3846/enviro.2014.162 ↗
55. Certain relationships between chemical composition and properties of petroleum asphalts from different origin10.2516/ogst:2006043a ↗
56. Changes in the chemical composition of australian bitumens10.1080/14680629.2009.9690214 ↗