journal article·2020-04

Effects of pre-curing treatment and chemical accelerators on Portland cement mortars at low temperature (5 °C)

Zhuangzhuang Liu, Baowen Lou, Diego Maria Barbieri, Aimin Sha, Tong Ye, Yanlong Li

Publisher page

Abstract

Abstract Artificial heating and chemical admixtures are widespread solutions to keep and improve the early strength of cement concretes in cold weather. The research analyzed the performance of cement mortar at low temperature (5 °C) in combination with pre-curing treatment and the use of chemical accelerators, e.g., calcium chloride (CaCl2), sodium nitrite (NaNO2), potassium carbonate (K2CO3), and sodium sulfate (Na2SO4). The investigation comprised the mechanical behavior, setting time, released heat of hydration, and microstructures. The standard curing pretreatment at 20 °C, differently from curing at 5 °C, engendered a reduction in the mechanical strength of both untreated and chemically treated cement mortar samples. Although all chemicals accelerated the reactions of hydration, the achieved compressive strengths of the mortars were different. The specimens treated with calcium chloride (CaCl2) reached the highest compressive strength, followed by sodium nitrite (NaNO2) and sodium sulfate (Na2SO4). Specimens containing potassium carbonate (K2CO3) attained the lowest compressive strength. Further analyses highlighted the importance of the time interval between initial and final setting: a shorter time interval led to lower mechanical strength due to more cracks in the cement matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Mehta · 2006
2. ACI Committee 306, ACI 306.1-90, Standard Specification for Cold Weather Concreting, (Reapproved 2002), American Concrete Institute, Farmington Hills, MI, 2010.
3. ACI Committee 306, ACI 306R-10, Guide to Cold Weather Concreting, American Concrete Institute, Farmington Hills, MI, 2010.
4. MOHURD, JGJ 104-2011, Specification for Winter Construction of Building Engineering, Ministry of Housing and Urban-Rural Development, Beijing, China, 2011.
5. Intergovernmental Panel on Climate Change (IPCC), Climate Change, Impact, Adaptations and Mitigation of Climate Change: Scientific-Technical Analyses, Cambridge University Press, Cambridge, 1995.
6. Young · 2002
7. Kinetic and thermodynamic modeling of Portland cement hydration at low temperatures10.1007/s11696-016-0007-5 ↗
8. A laboratory study of Portland cement hydration under low temperatures10.1080/14680629.2017.1329857 ↗
9. Steam curing of concrete10.1680/macr.1949.1.2.79 ↗
10. T.R. Naik, Maturity functions for concrete cured during winter conditions, in: Temperature Effects on Concrete, ASTM International, 1985.10.1520/STP34210S ↗
11. Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions10.1016/j.conbuildmat.2014.12.011 ↗
12. The properties of concrete at very low temperatures10.1007/BF02472556 ↗
13. Freeze–thaw durability of air-entrained concrete under various types of salt lake brine exposure10.1680/jmacr.17.00247 ↗
14. Cold weather concreting admixtures10.1016/S0958-9465(97)00063-2 ↗
15. The effect of antifreeze additives on fresh concrete subjected to freezing and thawing cycles10.1016/j.coldregions.2016.04.008 ↗
16. Comparison of the accelerating effect of various additions on the early hydration of Portland cement10.1016/j.conbuildmat.2016.03.052 ↗
17. Comparison of Ca(NO3)2 and CaCl2 admixtures on reaction, setting, and strength evolutions in plain and blended cementing formulations10.1061/(ASCE)MT.1943-5533.0001240 ↗
18. Portland cement hydration behavior at low temperatures: views from calculation and experimental study
19. Compressive strength development of concrete with different curing time and temperature10.1016/S0008-8846(98)00164-1 ↗
20. Low initial curing temperature improves the strength of concrete test cylinders
21. International Organization for Standardization, ISO 679:2009(E), Cement-Test methods-Determination of strength, 2nd ed., ISO, Switzerland, n.d.
22. Ministry of Transportation · 2005
23. Low temperature curing of metakaolin concrete10.1061/(ASCE)0899-1561(2009)21:8(362) ↗
24. New understanding of cement hydration mechanism through electrical resistivity measurement and microstructure investigations10.1061/(ASCE)0899-1561(2009)21:8(368) ↗
25. ACI Committee 207, ACI 207.1R-05, Guide to Mass Concrete, (Reapproved 2012), American Concrete Institute, Farmington Hills, MI, 2005.
26. L. Barna, C. Korhonen, Guidance for optimizing admixture dosage rates for cold weather admixture systems, Bridges. 10 (2014) 9780784412473-018.
27. Hydration kinetics and microstructure development of normal and CaCl2-accelerated tricalcium silicate pastes10.1021/jp907078u ↗
28. Taylor · 1997