Investigations on design and durability characteristics of cement treated reclaimed asphalt for base and subbase layers
Source abstract
Abstract
Abstract This paper presents the mechanical, durability and microstructure characteristics of cement treated recycled asphalt (CTRA) bases and sub-bases material produced by varying the percentage of virgin aggregate (VA), recycled asphalt aggregate (RA), and cement content. Modified proctor method of compaction was used to prepare cylindrical specimens at 2.5, 5.0, 7.5, and 10.0% cement contents (% by wt. of aggregate) with different blends of VA and RA. Durability tests were carried out to evaluate the performance of mixtures under repeated wetting and drying in the tropical climate. Experimental results revealed that the addition of cement in CTRA had more effect on mechanical and durability properties compared to RA content. The CTRA mixtures were found to be more ductile albeit lower values of elastic modulus. Scanning Electronic Microscope (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) analysis manifest that large amount of Ettringite and higher the Si/Ca ratio in CTRA compared to cement treated mixtures without RA. The higher proportion of these products signify the detrimental effect in mechanical properties. Cost analysis for a typical pavement section demonstrate that the cost-saving of the pavement section with CTRA mixtures observed to be in the range of 26–32% under varying cement and RA contents compared to the pavement section without CTRA. It was found that these mixtures can be used as a replacement for granular bases and sub-bases in flexible pavements and/or bases for concrete pavements instead of roller-compacted concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Leaching of pollutants from reclaimed asphalt pavement10.1089/ees.1999.16.105 ↗
2. Cement stabilization of reclaimed asphalt pavement aggregate for road bases and subbases10.1061/(ASCE)0899-1561(2002)14:3(239) ↗
3. Laboratory investigations on Reclaimed Asphalt Pavement (RAP) for using it as base course of flexible pavement10.1016/j.proeng.2017.05.069 ↗
4. Laboratory investigation of cement-treated reclaimed asphalt pavement material10.1061/(ASCE)MT.1943-5533.0001158 ↗
5. Cement-treated bases containing reclaimed asphalt pavement, quarry by-products, and fibers10.3141/2580-02 ↗
6. Cement stabilization of aggregate base material blended with reclaimed asphalt pavement10.3141/2026-06 ↗
7. Laboratory evaluation of the use of cement-treated construction and demolition materials in pavement base and subbase applications10.1061/(ASCE)MT.1943-5533.0001148 ↗
8. Evaluation and mix design of cement-treated base materials with a high content of reclaimed asphalt pavement10.3141/2212-12 ↗
9. Durability and long-term performance of geopolymer stabilized reclaimed asphalt pavement base courses10.1016/j.conbuildmat.2016.05.162 ↗
10. Rana · 2004 · 212
11. FHWA, Reclaimed asphalt pavement in asphalt mixtures: state of the practice, Publication number: FHWA-HRT-11-021, Washington, DC, 2011.
12. ASTM C311, Standard test methods for sampling and testing fly ash or natural pozzolans for use in Portland-cement concrete, 2017.
13. MoRTH, Specifications for road and bridge works, Published by the Indian Roads Congress on behalf of the Govt. of India, Ministry of Road Transport and Highways, Government of India, 2000.
14. ASTM D1557, Standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ft3 (2700 kN-m/m3)), 2012.
15. ASTM C1435, Standard practice for molding roller-compacted concrete in cylinder molds using a vibrating hammer, 2014.
16. Austroads, Cemented materials characterisation: Final report, AP-R462-14, Sydney, Australia, 2014a.
17. ASTM D559, Standard test methods for wetting and drying compacted soil-cement mixtures, 2015.
18. Fracture properties of roller-compacted concrete with virgin and recycled aggregates10.3141/2441-17 ↗
19. Indian Roads Congress, Guidelines for the design of flexible pavements, IRC-37, 2012. New Delhi, India, pp. 12–18.
20. AASHTO guide for design of pavement structures, American Association of State Highway and Transportation Officials, Washington, D.C., 1993.
21. Laboratory fatigue life of cemented materials in Australia10.1080/14680629.2013.779300 ↗