Rate dependent tensile behavior of polyurethane under varying strain rates
Source abstract
Abstract
Abstract Elastomeric polymers, such as polyurethane (PU), are being used in novel applications to enhance the load-carrying capacity, ductility, and the survivability of structures under dynamic loading. The mechanical response of elastomeric materials is highly rate and pressure dependent, and exhibits stress-strain non-linearity. The objective of the current study is to identify the effect of the strain rate on the uniaxial tensile behavior of elastomeric PU. To this end, four types of PUs differing in their plasticizer content were used. The uniaxial tensile characteristics under loading and unloading conditions and the cyclic softening behavior were examined under varying strain rate regimes (ranging from 0.001 s−1 to 0.33 s−1). The experimental results showed that the stress-strain behavior of all PUs is non-linear and rate dependent. Young’s module, yield stress, tangent module, ultimate tensile stress, failure stress, failure strain, resilience module, toughness module and residual strain of PU6 at 0.33 s−1 are 0.37–4.13 times compared to the values at 0.001 s−1. It also exhibits hysteresis and cyclic softening. Increasing strain rates resulted in a dramatic transition in behavior from rubbery to leathery for all PUs. This behavior was described as positive strain-rate dependence. The behavior of PUs was defined as hyper-viscoelastic material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer composites and self-healing · Polymer Nanocomposites and Properties · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Structural engineering of polyurethane coatings for high performance applications10.1016/j.progpolymsci.2006.05.003 ↗
2. The use of polyurethane for structural and infrastructural engineering applications: a state-of-the-art review10.1016/j.conbuildmat.2018.09.166 ↗
3. Elastomeric polymers for blast and ballistic retrofitting of structures10.11113/jt.v76.3608 ↗
4. A multi-mechanism model for large-strain thermomechanical behavior of polyurethane shape memory polymer10.1016/j.polymer.2017.10.003 ↗
5. Computational investigation of impact energy absorption capability of polyurea coatings via deformation-induced glass transition10.1016/j.msea.2010.08.042 ↗
6. High-strain-rate tensile mechanical response of a polyurethane elastomeric material
7. Glass interface effect on high-strain-rate tensile response of a soft polyurethane elastomeric polymer material10.1016/j.compscitech.2015.08.007 ↗
8. Synthesis of highly functionalized thermoplastic polyurethanes and their potential applications10.1016/j.polymer.2017.03.083 ↗
9. Explosive testing of polymer retrofit masonry walls10.1061/(ASCE)0887-3828(2004)18:2(100) ↗
10. T.D. Hrynyk, J.J. Myers, F. Asce, Out-of-Plane Behavior of URM Arching Walls with Modern Blast Retrofits: Experimental Results and Analytical Model, (2008) 1589–159710.1061/(ASCE)0733-9445(2008)134:10(1589) ↗
11. Plastic deformation of polyurea coated composite aluminium plates subjected to low velocity impact10.1016/j.matdes.2013.11.063 ↗
12. Out-of-plane impact resistance of aluminium plates subjected to low velocity impacts10.1016/j.matdes.2013.03.023 ↗
13. Experimental investigation of response of monolithic and bilayer plates to impulsive loads10.1016/j.ijimpeng.2009.04.002 ↗
14. Investigation of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments10.1016/j.mechmat.2009.09.008 ↗
15. Deformation of polyurea-coated steel plates under localised blast loading10.1016/j.ijimpeng.2012.08.005 ↗
16. The role of adhesive in the ballistic/structural performance of ceramic/polymer–matrix composite hybrid armor10.1016/j.matdes.2012.05.023 ↗
17. Behavior of sandwich plates reinforced with polyurethane/polyurea interlayers under blast loads10.1177/1099636207066313 ↗
18. Raman · 2011
19. Bio-based polyurethane elastomer for strengthening application of concrete structures under dynamic loadings
20. Hyper-viscoelastic constitutive models for predicting the material behavior of polyurethane under varying strain rates and uniaxial tensile loading10.1016/j.conbuildmat.2019.117417 ↗
21. S.N. Raman, T. Pham, T. Ngo, P. Mendis. (2012). Experimental Investigation on the Behaviour of RC Panels Retrofitted with Polymer Coatings under Blast Effects. Proceedings of the 2nd International Conference on Sustainable Built Environment: 14 pgs. Kandy, Sri Lanka, 14–16 December 2012.
22. S. N. Raman, H. M. C. C. Somarathna, A. A. Mutalib, K. H. Badri. (2017). “Elastomeric Polyurethane for Retrofitting Application of Concrete Structures under Dynamic Loading”. RILEM Proceedings 118: Advances in Construction Materials and Systems – Vol. 2 (ICACMS2017): pp. 549–556. Chennai, India, 3–8 September 2017.
23. Polyurethane elastomers10.1016/0079-6700(91)90011-9 ↗
24. Elasticity and inelasticity of thermoplastic polyurethane elastomers: Sensitivity to chemical and physical structure10.1016/j.polymer.2010.04.069 ↗
25. Thermoplastic Elastomers
26. Irreversible deformation of semicrystalline PUR-elastomers -a novel concept10.1007/BF01418190 ↗
27. The influences of deformation state and experimental conditions on inelastic behaviour of an extruded thermoplastic polyurethane elastomer10.1016/j.matdes.2013.02.055 ↗
28. F. Yeh, B.S. Hsiao, B.B. Sauer, S. Michel, H.W. Siesler, In-Situ Studies of Structure Development during Deformation of a Segmented Poly (urethane – urea) Elastomer (2003) 1940–1954.10.1021/ma0214456 ↗
29. Quasi-static behavior of palm-based elastomeric polyurethane: for strengthening application of Structures under impulsive loadings10.3390/polym8050202 ↗
30. Dynamic-Tensile-Extrusion for investigating large strain and high strain rate behavior of polymers10.1016/j.polymertesting.2012.07.011 ↗
31. Lonesuc · 2005
32. Mechanical characterization of polyurethane elastomers: for retrofitting application against blast effects
33. The effect of hard segment ordering in copolyurethane elastomers obtained by using simultaneously two types of diisocyanates10.1016/S0032-3861(03)00489-0 ↗
34. Mechanical response of dibenzyl-based polyurethanes with diol chain extension10.1016/j.polymer.2005.03.046 ↗
35. H.J. Qi, M.C. Boyce, Stress-Strain Behavior of Thermoplastic Polyurethane Stress-Strain Behavior of Thermoplastic (2004) 1–51
36. Microphase-separated structure and mechanical properties of novel polyurethane elastomers prepared with ether based diisocyanate10.1016/j.polymer.2005.09.009 ↗
37. Control of mechanical properties of thermoplastic polyurethane elastomers by restriction of crystallization of soft segment10.3390/ma3125097 ↗
38. Design, polymerization, and properties of high performance thermoplastic polyurethane elastomers from seed-oil derived soft segments
39. Effect of high strain rate and low temperature on mode II fracture toughness of ductile adhesive10.1016/j.ijadhadh.2018.09.003 ↗
40. Largely improved mechanical properties of a biodegradable polyurethane elastomer via polylactide stereocomplexation10.1016/j.polymer.2017.12.067 ↗
41. C.M. Roland, J.N. Twigg, Y. Vu, P.H. Mott, High strain rate mechanical behavior of polyurea, 48 (2007) 574–578. doi:10.1016/j.polymer.2006.11.051.10.1016/j.polymer.2006.11.051 ↗
42. Analysis of Strain Rate Dependent Tensile Behaviour of Polyurethanes
43. Tensile behaviour of glass fibre reinforced polyurethane at different strain rates10.1016/j.matdes.2013.01.065 ↗
44. High strain rate sensitivity of epoxy/clay nanocomposites using non-contact strain measurement10.1016/j.polymer.2015.12.054 ↗
45. Large deformation rate-dependent stress – strain behavior of polyurea and polyurethanes10.1016/j.polymer.2005.10.107 ↗
46. S.S. Sarva, S. Deschanel, M.C. Boyce, W. Chen, Stress e strain behavior of a polyurea and a polyurethane from low to high strain rates 48 (2007) 2208–2213. doi:10.1016/j.polymer.2007.02.058.10.1016/j.polymer.2007.02.058 ↗
47. Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain rates10.1016/j.ijimpeng.2008.12.010 ↗
48. Measurement and prediction of compressive properties of polymers at high strain rate loading10.1016/j.matdes.2011.04.037 ↗
49. High strain rate mechanical behavior of epoxy under compressive loading: experimental and modeling studies10.1016/j.msea.2010.10.099 ↗
50. A visco-elastoplastic constitutive model for large deformation response of polycarbonate over a wide range of strain rates and temperatures
51. Temperature and strain rate dependent tensile behavior of a transparent polyurethane interlayer10.1016/j.matdes.2014.08.054 ↗
52. Analytical and experimental studies on mechanical behavior of composites under high strain rate compressive loading10.1016/j.matdes.2012.07.040 ↗
53. Rate-dependent large deformation behavior of PC/ABS10.1016/j.polymer.2008.10.042 ↗
54. Experimental investigation on the tensile behavior of polyurea at high strain rates10.1016/j.matdes.2013.02.063 ↗
55. Temperature and strain rate dependent large tensile deformation and tensile failure behavior of transparent polyurethane at intermediate strain rates10.1016/j.ijimpeng.2019.03.005 ↗
56. Dissipation and resilience of elastomeric segmented copolymers under extreme strain rates
57. High-speed testing and material modeling of unfilled styrene butadiene vulcanizates at impact rates10.1023/B:JMSC.0000047530.86758.b9 ↗
58. Impact tests on lincoln wool fibers using a mini split hopkinson tensile bar10.1177/0040517508095610 ↗
59. Compressive response of multiple-particles-polymer systems at various strain rates
60. De Castro San Román · 2005
61. Biobased polyurethane from palm kernel oil-based polyol
62. Chemical analyses of palm kernel oil-based polyurethane prepolymer
63. Real time SAXS/stress-strain studies of thermoplastic polyurethanes at large strains10.1016/S0032-3861(02)00386-5 ↗
64. W.D. Callister, D.G. Rethwisch, Materials science and engineering: an introduction, n.d.
65. Hibbeler · 2011