journal article·2020-11

Improved durability of Saudi Class G oil-well cement sheath in CO2 rich environments using olive waste

Ahmed Abdulhamid Mahmoud, Salaheldin Elkatatny

Publisher page

Abstract

Abstract The physical properties of the oil-well cement, especially its strength and permeability, are changing significantly after reacting with CO2-saturated brine which will alter the cement hydration products. In this study, the effect of incorporating the olive waste into Saudi Class G oil-well cement formulation subjected to CO2 sequestration conditions at 130 °C and 10 MPa on the cement permeability, carbonation depth, compressive and tensile strength, and microstructural changes during 20 days of carbonation was evaluated. The results obtained showed that the addition of 0.1% by weight of cement (BWOC) of the olive waste to the cement enhanced the cement resistance to the carbonation process and decrease the carbonation depth from 1469 μm for the base cement to 1269 μm after 20 days of carbonation. Incorporating 0.1% BWOC of the olive waste into the cement slurry also maintained the original cement permeability of 14.3% less than that for the base cement, while the permeability of the cement samples with 0.1% BWOC olive waste after 20 days of carbonation is 33.9% lower than the base cement permeability. The permeability reduction is the main mechanism responsible for the enhancement of carbonation resistance for the olive waste-based cement. The ability of the olive waste to delay calcium leaching is attributed to the decrease in the permeability of the sample with 0.1% BWOC of olive waste.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Drilling and Well Engineering · Concrete and Cement Materials Research · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A review of developments in carbon dioxide storage10.1016/j.apenergy.2017.09.015 ↗
2. Influence of capillary-pressure models on CO2 solubility trapping10.1016/j.advwatres.2013.08.005 ↗
3. Interfacial tension of CO2 + brine systems: experiments and predictive modelling10.1016/j.advwatres.2017.02.015 ↗
4. DECC, 2012. CCS Roadmap - Supporting Deployment of Carbon Capture and Storage in the UK, UK.
5. Experimental investigation on the impact of connate water salinity on dispersion coefficient in consolidated rocks cores during Enhanced Gas Recovery by CO2 injection10.1016/j.jngse.2018.10.007 ↗
6. Selection of monitoring techniques for a carbon storage and enhanced coalbed methane recovery pilot test in the Central Appalachian Basin10.1016/j.coal.2013.07.007 ↗
7. Experimental study of the effects of CO2 concentration and pressure at elevated temperature on the mechanical integrity of oil and gas well cement10.1016/j.jngse.2017.04.009 ↗
8. Life cycle water use of coal- and natural-gas-fired power plants with and without carbon capture and storage10.1016/j.ijggc.2015.11.029 ↗
9. Hydrogeochemical and isotopic evidence for trans-formational flow in a sedimentary basin: implications for CO2 storage10.1016/j.apgeochem.2012.08.024 ↗
10. Prediction of CO2 leakage risk for wells in carbon sequestration fields with an optimal artificial neural network10.1016/j.ijggc.2017.11.004 ↗
11. The permeability of geopolymer at down-hole stress conditions: application for carbon dioxide sequestration wells10.1016/j.apenergy.2012.09.004 ↗
12. Carbonation resistance of cement containing supplementary cementitious materials and its relation to various parameters of concrete10.1016/j.conbuildmat.2018.05.162 ↗
13. Corrosion and failure assessment for CO2 EOR and associated storage in the Weyburn field10.1016/j.egypro.2017.03.1671 ↗
14. Geochemical alteration of wellbore cement by CO2 or CO2+H2S reaction during long-term carbon storage10.1002/ghg.1595 ↗
15. Effect of the hydration temperature on the microstructure of class G cement: C-S-H composition and density10.1016/j.cemconres.2017.02.008 ↗
16. The work of powers and Brownyard revisited: part 110.1016/j.cemconres.2004.05.031 ↗
17. A review on cement degradation under CO2-rich environment of sequestration projects10.1016/j.jngse.2015.09.061 ↗
18. Degradation of cement at the reservoir/ cement interface from exposure to carbonated brine10.1016/j.ijggc.2011.06.007 ↗
19. H2S–CO2 reaction with hydrated Class H well cement: acid-gas injection and CO2 Co-sequestration10.1016/j.ijggc.2011.02.008 ↗
20. Carbonation resistance cement for CO2 storage and injection wells10.1016/j.petrol.2016.08.006 ↗
21. Meter-scale reactive transport modeling of CO2-rich fluid flow along debonded wellbore casing-cement interfaces10.1021/acs.est.7b05358 ↗
22. A.A. Mahmoud, S. Elkatatny, Effect of the Temperature on the Strength of Nanoclay-Based Cement under Geologic Carbon Sequestration. Paper AADE-19-NTCE-066 Presented at the 2019 AADE National Technical Conference and Exhibition, Denver, Colorado, USA, April 9-10, 2019.
23. A.A. Mahmoud, S. Elkatatny, M. Mahmoud, Improving Class G Cement Carbonation Resistance Using Nanoclay Particles for Geologic Carbon Sequestration Applications. Paper SPE-192901-MS Presented at the 2018 Abu Dhabi International Petroleum Exhibition & Conference, Abu Dhabi, UAE, 12-15 November. doi: 10.2118/192901-MS, 2018.10.2118/192901-MS ↗
24. Armouring of well cement in H2S–CO2 saturated brine by calcite coating – experiments and numerical modelling10.1016/j.apgeochem.2011.12.004 ↗
25. Mitigating CO2 reaction with hydrated oil well cement under geologic carbon sequestration using nanoclay particles10.1016/j.jngse.2019.102902 ↗
26. Effect of different mix compositions on apparent carbon dioxide (CO2) permeability of geopolymer: suitability as well cement for CO2 sequestration wells10.1016/j.apenergy.2013.05.050 ↗
27. O.R. Ilesanmi, B. Hilal, S. Gill, A. Brandl, Long term wellbore isolation in a corrosive environment, in: SPE/IADC Middle East Drilling Technology Conference & Exhibition. Society of Petroleum Engineers, Dubai, 2014. doi: 10.3997/2214-4609-pdb.395.SPE-166769-MS.10.3997/2214-4609-pdb.395.SPE-166769-MS ↗
28. Well completion and integrity evaluation for CO2 injection wells10.1016/j.rser.2015.02.022 ↗
29. Cementing solutions for corrosive well environments10.2118/132228-PA ↗
30. V. Barlet-Gouedard, S. James, B. Drochon, B. Piot, C. Jean-Philippe, Cement composition for carbon dioxide supercritical environment, in: Patent, U. (Ed.), US 8, 091,642 B2, US, 2012.
31. Nanosilica-latex reduction carbonation-induced degradation in cement of CO2 geological storage wells10.1016/j.jngse.2019.03.013 ↗
32. A pozzolanic based methodology to reinforce Portland cement used for CO2 storage sites10.1016/j.jngse.2019.103062 ↗
33. Improving class G cement carbonation resistance for applications of geologic carbon sequestration using synthetic polypropylene fiber10.1016/j.jngse.2020.103184 ↗
34. N.M. Al-Akhras, Performance of olive waste ash concrete exposed to alkali‐silica reaction. Structural Concrete 13(4), 221–226 (Wiley Group, USA), 2012. doi: 10.1002/suco.201100058.10.1002/suco.201100058 ↗
35. Performance of olive waste ash concrete exposed to elevated temperatures10.1016/j.firesaf.2008.08.006 ↗
36. Effect of olive waste (Husk) on behavior of cement paste
37. API, 1991. Worldwide Cementing Practices, API, Dallas, Texas, USA.
38. API, 2013. API Recommended Practice 10B-2-Recommended Practice for Testing Well Cements. Second edition, American Petroleum Institute, Washington.
39. Influence of nanoclay content on cement matrix for oil wells subjected to cyclic steam injection10.3390/ma12091452 ↗
40. Influence of the age on the air permeability of concrete10.1007/BF00356701 ↗
41. A.A. Mahmoud, S. Elkatatny, S.A. Ahmed, M. Mahmoud, Nanoclay Content Influence on Cement Strength for Oil Wells Subjected to Cyclic Steam Injection and High-Temperature Conditions. In the Proceedings of the 2018 Abu Dhabi International Petroleum Exhibition & Conference, Abu Dhabi, UAE, 12-15 November, 2018. SPE-193059-MS. doi: 10.2118/193059-MS.10.2118/193059-MS ↗
42. Carbonation of cement paste: understanding, challenges, and opportunities10.1016/j.conbuildmat.2016.04.138 ↗