journal article·2020-12

Potential of using virgin cork as aggregates in development of new lightweight concrete

Ahmed Kamel Tedjditi, Fouad Ghomari, Omar Taleb, Rafik Belarbi, Rachid Tarik Bouhraoua

Publisher page

Abstract

Abstract This paper examines the potential to develop a lightweight concrete for building applications using cork aggregates. The main contribution of the proposed work is the use of virgin cork, which presents, compared to reproduction cork, different structure, density and surface type so that it has insufficient quality for cork stoppers. The experimental work was carried out by producing four concrete mixtures containing, in volume of aggregates: 25, 50, 75 and 100% of virgin cork aggregates. Cork concretes were assessed and compared with an ordinary concrete in terms of: workability, plastic viscosity, density, ultrasonic pulse velocity (UPV), porosity, capillary absorption, mechanical properties, microstructure and thermal conductivity. The experimental work shows that the incorporation of virgin cork into concrete reduces its workability and plastic viscosity and produces lightweight concretes with density lower than 720 kg/m3. Remarkably, depending on virgin cork amount, the increase of concrete porosity varied between 26 and 470%, compared to ordinary concrete. When replacing the totality of mineral aggregates, concretes showed values of only 0.48 and 0.72 MPa for compressive and flexural strength, respectively. Nonetheless, for non-structural materials, these mechanical strengths can be considered as competitive. Investigation of the Interfacial Transition Zone (ITZ) between cork aggregates and cementitious matrix revealed porous layer with thickness ranging between 90 and 150 µm. In terms of insulation capacity, the use of virgin cork leads to enhance thermal conductivity of concrete by 28–98 %, depending on cork percentage. Findings suggest that the developed virgin cork concretes can be used in several building application, namely, as filling blocks and insulation screeds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Plant Surface Properties and Treatments · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. IEA, Key Wold Energy Statistic, Int. Energy Agency. (2017) 97. https://doi.org/10.1017/CBO9781107415324.004.10.1017/CBO9781107415324.004 ↗
2. Agricultural wastes as aggregate in concrete mixtures - A review10.1016/j.conbuildmat.2013.11.074 ↗
3. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
4. Lightweight screed containing cork granules: Mechanical and hygrothermal characterization10.1016/j.cemconcomp.2014.01.012 ↗
5. Experimental and numerical investigations of thermal performance of a Hemp Lime external building insulation10.1016/j.buildenv.2017.12.037 ↗
6. Use of Furnace Bottom Ash for producing lightweight aggregate concrete with thermal insulation properties10.1016/j.jclepro.2015.10.001 ↗
7. The effects of by-products incorporated in low-strength concrete for concrete masonry units10.1016/j.conbuildmat.2017.07.086 ↗
8. Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes10.1016/j.wasman.2008.06.014 ↗
9. Recycled lightweight concrete made from footwear industry waste and CDW10.1016/j.wasman.2010.02.007 ↗
10. Mechanical behaviour and thermal conductivity of mortars containing waste rubber particles10.1016/j.matdes.2010.10.013 ↗
11. Physico-mechanical and thermal properties of composite mortars containing lightweight aggregates of expanded polyvinyl chloride10.1016/j.conbuildmat.2018.04.173 ↗
12. Hygro-thermal and durability properties of a lightweight mortar made with foamed plastic waste aggregates10.1016/j.conbuildmat.2018.03.083 ↗
13. A comparison of the thermal conductivity of oil palm shell foamed concrete with conventional materials10.1016/j.matdes.2013.04.078 ↗
14. Use of raw rice husk as natural aggregate in a lightweight insulating concrete: An innovative application10.1016/j.conbuildmat.2014.07.025 ↗
15. Properties of cementitious mortars reinforced with natural fibers10.1080/01694243.2017.1290572 ↗
16. Mechanical and hygrothermal behavior of clay – Sunflower (Helianthus annuus) and rape straw (Brassica napus) plaster bio-composites for building insulation10.1016/j.conbuildmat.2017.11.140 ↗
17. Hygrothermal and mechanical characterisation of novel hemp shiv based thermal insulation composites10.1016/j.conbuildmat.2019.04.029 ↗
18. Cork: Properties, capabilities and applications10.1179/174328005X41168 ↗
19. Cork: Biology, Production and Uses
20. Cork as a building material: a review10.1007/s00107-016-1076-4 ↗
21. Cork composites: A review10.3390/ma2030776 ↗
22. V. Garavaglia, C. Besacier, State of Mediterranean forests, in: Vivexpo, Vives, 2012.
23. Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance10.1016/j.conbuildmat.2013.08.006 ↗
24. Developmental potentiality of insulating lightweight concrete based on cork and calcareous sand10.1080/01694243.2015.1129882 ↗
25. Properties of hydrophobised lightweight mortars with expanded cork10.1016/j.conbuildmat.2017.08.052 ↗
26. Densidade da cortiça: factores que a influenciam
27. H. Pereira, Anais Instituto Superior de Agronomía Lisboa, 40 (1981) 17–25.
28. M.M. Caldas, J.L. Ferreira, M. Borges, Cortiça. Boletim do Instituto dos Produtos Florestais, Lisboa. 578 (1986) 339–342.
29. BS EN 1097-3, Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids, 1998.
30. BS EN 1097-6, Tests for mechanical and physical properties of aggregates. Part 6: Determination of particle density and water absorption, 2013.
31. BS EN 933-1, Tests for geometrical properties of aggregates. Part 1 : Determination of particle size distribution – Sieving method, 2012.
32. Y. Traoré, A. Messan, K. Hannawi, J. Gerard, W. Prince, F. Tsobnang, Effect of oil palm shell treatment on the physical and mechanical properties of lightweight concrete, 161 (2018) 452–460. https://doi.org/10.1016/j.conbuildmat.2017.11.155.10.1016/j.conbuildmat.2017.11.155 ↗
33. A.K. Tedjditi, F. Ghomari, O. Taleb, R.T. Bouhraoua, M.R. Dib, A. Amara, Evaluation of the mixing mode effect on properties of cork concrete, in: 2ème Séminaire Int. Génie Civ., Oran, Algeria, 2018.
34. BS EN 12350-2, Testing fresh concrete. Part 2: Slump-test, 2009. https://www.en-standard.eu/din-en-12350-2-testing-fresh-concrete-part-2-slump-test/%0Ahttps://bsol.bsigroup.com/Home.
35. Rheology of ordinary and low-impact environmental concretes10.1080/01694243.2015.1059641 ↗
36. Formulation and rheology of eco-self-compacting concrete (Eco-SCC)10.1080/01694243.2016.1215010 ↗
37. Processing the Couette viscometry data using a Bingham approximation in shear rate calculation10.1016/j.jnnfm.2008.01.006 ↗
38. BS EN 12390-7, Testing hardened concrete. Part 7: Density of hardened concrete, 2009.
39. BS EN 12504-4, Testing concrete — Part 4: Determination of ultrasonic pulse velocity, 2004.
40. AFPC-AFREM, Durabilité des bétons : Méthodes recommandées pour la mesure des grandeurs associées à la durabilité, 2007. https://scholar.google.com/scholar?q=méthodes+recommande+́es+pour+la+mesure+des+grandeurs+associe+́es+a+%60+la+durabilite+́+»%2C&btnG=&hl=en&as_sdt=0%2C5#0 (accessed April 25, 2016).
41. ASTM C 1585-04, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, Am. Soc. Test. Mater. (2004) 1–6.
42. BS EN 12390-3, Testing hardened concrete. Part 3: Compressive strength of test specimens, 2009.
43. A.T. Le, A. Gacoin, A. Li, T.H. Mai, M. Rebay, Y. Delmas, Experimental investigation on the mechanical performance of starch – hemp composite materials, 61 (2014) 106–113. https://doi.org/10.1016/j.conbuildmat.2014.01.084.410.1016/j.conbuildmat.2014.01.084 ↗
44. BS EN 12390-5, Testing hardened concrete. Part 5: Flexural strength of test specimens, 2009.
45. Experimental and modeling investigation of the thermal conductivity of fiber-reinforced soil subjected to freeze-thaw cycles10.1016/j.applthermaleng.2016.07.112 ↗
46. Properties of fresh and hardened concrete using agro-waste as partial replacement of coarse aggregate - A review10.1016/j.conbuildmat.2015.02.063 ↗
47. Long term study on compressive and bond strength of coconut shell aggregate concrete10.1016/j.conbuildmat.2011.08.072 ↗
48. Mechanical and hygrothermal characterisation of cork concrete composite: experimental and modelling study
49. Lateral load-carrying capacity of hemp concrete as a natural infill material in timber frame walls10.1016/j.engstruct.2018.11.046 ↗
50. Cement & Concrete Composites The mechanical, transport and thermal properties of mortar and concrete containing waste cork10.1016/j.cemconcomp.2012.06.003 ↗
51. Thermal conductivity of concrete – A review10.1016/j.jobe.2018.07.002 ↗