Influence of water-to-binder ratio on the optimum percentage of nano-TiO2 addition in terms of compressive strength of mortars: A laboratory and virtual experimental study based on ANN model
Source abstract
Abstract
Abstract This research aims to study the effect of water-to-binder ratio (w/b) as a potential key factor that changes the optimum percentage of nano-TiO2 addition in terms of compressive strength of mortars. Data from previous literature were collected and analyzed. An artificial neuron network (ANN) model was trained and validated to predict the compressive strength of mortars as a function of the level of nano-TiO2, w/b, cement content, aggregate-to-binder ratio, and age. Then, a virtual experimental campaign evaluating 45,015 case scenarios, and using the ANN model, was performed to study the effect of the w/b on the optimum percentage of nano-TiO2. Results suggest that the higher the w/b and the lower the age, the higher the optimum percentage of nano-TiO2. Laboratory experimental compressive strength results are in agreement with these trends. Thermogravimetric analysis and 3D X-Ray scans show that the use of nano-TiO2 presents a double positive effect on compressive strength, reducing the porosity and increasing the hydration product content when the initial porosity of the reference cement paste is high (due to high w/b). However, when the porosity of reference samples is very low (due to low w/b), the use of nano-TiO2 may lead to a reduction of hydration products content due to the lack of space for the CH to grow. Since the initial porosity was already very low, the porosity reduction due to the use of nano-TiO2 would not be enough to overcome the negative effect on hydration. Therefore, it may lead to a decrease in the compressive strength of mortars. These results explain the dependence of the optimum percentage of nano-TiO2 on w/b and age.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. White Cement for Architectural Concrete, Possessing Photocatalytic Properties, 11th Int
2. Photocatalysis of Cementitious Materials: Clean Buildings and Clean Air10.1557/mrs2004.99 ↗
3. Photocatalysis of cementitious materials, Int. RILEM Symp. Photocatal. Environ
4. Titanium dioxide photocatalysis: present situation and future approaches10.1016/j.crci.2005.02.055 ↗
5. Influence of nano-TiO2 on physical and hydration characteristics of fly ash–cement systems10.1016/j.conbuildmat.2016.02.087 ↗
6. Hydration and properties of nano-TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
7. The effects of TiO2 nanoparticles on properties of binary blended concrete10.1177/0021998310378910 ↗
8. Effects of nano-TiO2 on properties of cement-based materials10.1680/macr.13.00131 ↗
9. Influences of nano-TiO2 on the properties of cement-based materials: Hydration and drying shrinkage10.1016/j.conbuildmat.2015.02.003 ↗
10. Effects of adding nano-TiO 2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer paste10.1016/j.conbuildmat.2015.12.095 ↗
11. Effects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag pastes10.1016/j.cemconcomp.2014.11.009 ↗
12. The effect of curing temperature on the properties of cement pastes modified with TiO2 nanoparticles
13. Pore structure and chloride diffusivity of recycled aggregate concrete with nano-SiO2 and nano-TiO210.1016/j.conbuildmat.2017.05.168 ↗
14. Effects of fly ash and TiO2 nanoparticles on rheological, mechanical, microstructural and thermal properties of high strength self compacting concrete10.1016/j.mechmat.2013.01.010 ↗
15. Enhancements and mechanisms of nanoparticles on wear resistance and chloride penetration resistance of reactive powder concrete10.1016/j.conbuildmat.2018.09.041 ↗
16. Single and combined effects of nano-SiO2, nano-Al2O3 and nano-TiO2 on the mechanical, rheological and durability properties of self-compacting mortar containing fly ash10.1016/j.conbuildmat.2015.03.006 ↗
17. Ryou, Influence of titanium dioxide nanoparticles on the sulfate attack upon ordinary Portland cement and slag-blended mortars10.3390/ma11030356 ↗
18. Effects of Nano-TiO2 on the toughness and durability of cement-based material
19. Incorporation of nano TiO2 in black rice husk ash mortars10.1016/j.conbuildmat.2013.06.066 ↗
20. Exploring the influence of SiO2 and TiO2 nanoparticles on the mechanical properties of concrete10.1016/j.conbuildmat.2018.04.181 ↗
21. Self-cleaning engineered cementitious composites10.1016/j.cemconcomp.2015.09.007 ↗
22. Effect of nano-TiO2 on the mechanical properties of cement mortar10.1016/j.conbuildmat.2011.10.047 ↗
23. Self-cleaning and mechanical properties of modified white cement with nanostructured TiO210.1166/jnn.2013.7586 ↗
24. Experimental study of the mechanical properties and durability of self-compacting mortars with nano materials (SiO2 and TiO2)10.1016/j.conbuildmat.2015.08.049 ↗
25. Curing temperature: a key factor that changes the effect of TiO2 nanoparticles on mechanical properties, calcium hydroxide formation and pore structure of cement mortars10.1016/j.cemconcomp.2019.103374 ↗
26. TiO2 nanoparticles influence on the environmental performance of natural and recycled mortars: a life cycle assessment10.1016/j.eiar.2020.106430 ↗
27. Reactive powder concrete reinforced with nano SiO2-coated TiO210.1016/j.conbuildmat.2017.05.065 ↗
28. Z. Li, B. Han, X. Yu, S. Dong, L. Zhang, X. Dong, J. Ou, Effect of nano-titanium dioxide on mechanical and electrical properties and microstructure of reactive powder concrete, Mater. Res. Express. 4 (2017). doi: 10.1088/2053-1591/aa87db.10.1088/2053-1591/aa87db ↗
29. Influence of nanoparticles on fluidity and mechanical properties of cement mortar10.1016/j.conbuildmat.2015.10.149 ↗
30. Microstructure and durability properties of cement mortars containing nano-TiO2 and rice husk ash10.1016/j.conbuildmat.2016.03.136 ↗
31. The effect of TiO2 nanoparticles on water permeability and thermal and mechanical properties of high strength self-compacting concrete10.1016/j.msea.2010.09.074 ↗
32. Artificial Neural Network to Predict the Compressive Strength of Semilightweight Concrete Containing Ultrafine GGBS10.1520/JTE20180597 ↗
33. Machine learning-based compressive strength prediction for concrete: an adaptive boosting approach10.1016/j.conbuildmat.2019.117000 ↗
34. The mechanical properties and microstructure of ultra-high-performance concrete containing various supplementary cementitious materials10.1080/21650373.2016.1262798 ↗
35. Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer10.1016/j.conbuildmat.2019.117266 ↗
36. J.Y. Park, Y.G. Yoon, T.K. Oh, Prediction of concrete strength with P-, S-, R-wave velocities by support vector machine (SVM) and artificial neural network (ANN), Appl. Sci. 9 (2019). doi: 10.3390/app9194053.10.3390/app9194053 ↗
37. A logical calculus of the ideas immanent in nervous activity10.1007/BF02478259 ↗
38. L. Fausett, Fundamentals Of Neural Network Architectures, Algorithms, and Applications, Inc.,New Jersey. (1994).
39. Neural networks for predicting compressive strength of structural light weight concrete10.1016/j.conbuildmat.2008.12.003 ↗
40. S. Subaşi, Prediction of mechanical properties of cement containing class C fly ash by using artificial neural network and regression technique, Sci. Res. Essays. (2009).
41. Modeling slump of ready mix concrete using genetic algorithms assisted training of Artificial Neural Networks10.1016/j.eswa.2014.08.048 ↗
42. Prediction of compressive strength of concrete by neural networks10.1016/S0008-8846(00)00345-8 ↗
43. Nano-TiO2 effects on high temperature resistance of recycled mortars10.1016/j.jclepro.2020.121581 ↗
44. Influence of partial replacement TiO2 nanoparticles on the compressive and flexural strength of ordinary cement mortar
45. ASTM C349, C349-97. Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure), ASTM Int. (2018). doi: 10.1520/C0349-97.10.1520/C0349-97 ↗
46. Effects of sample preparation and interpretation of thermogravimetric curves on calcium hydroxide in hydrated pastes and mortars10.3141/2290-02 ↗
47. Hardened portland cement pastes of low porosity10.1016/0008-8846(73)90031-8 ↗
48. J. Beaudoin, I. Odler, Hydration, Setting and Hardening of Portland Cement, in: Lea’s Chem. Cem. Concr. (Fifth Ed., 5th ed., Elsevier Ltd., 2019: pp. 157–250. doi: 10.1016/b978-0-08-100773-0.00005-8.10.1016/B978-0-08-100773-0.00005-8 ↗
49. Investigations on the relationship between porosity, structure and strength of hydrated Portland cement pastes. II. Effect of pore structure and of degree of hydration10.1016/0008-8846(85)90044-4 ↗
50. The effect of water ratio on microstructure and composition of the hydration products of Portland cement pastes
51. Factors influencing cessation of hydration in water cured cement pastes