Experimental study on durability characteristics of composite fiber reinforced high-performance concrete incorporating nanosilica and ultra fine fly ash
Source abstract
Abstract
Abstract This study is aimed at investigating the durability properties of Composite Fiber Reinforced High-Performance Concrete. A 15% partial replacement of cement by weight was done with ultra-fine fly ash. The addition of nanosilica was in fractions of 0%, 1.5%, 3.0% and 4.5% by weight of cement. For each of the above combinations, 1.0% steel and 0.25% polypropylene fibers, respectively, by volume of the binders were added. A constant aggregate binder ratio of 2.0 and varying water binder ratios of 0.275, 0.300, 0.325 were used in this investigation. The sorptivity test was performed to assess the rate of absorption, and the rapid chloride permeability test (RCPT) was performed to assess the permeability of concrete. Test results revealed that all the mixes attained low to very low chloride permeability. The decrease in chloride ion permeability for mixes with nanosilica and ultra-fine fly ash ranged from 53.83% to 71.45% for 28 days curing period and 55.88% to 74.27% for 56 days curing period, as against the reference mix. ‘Residual Compressive Strength’ and ‘Percentage Weight Loss’ for 28 and 56 days of immersion in 5% concentrated solutions of HCl, H2SO4, and MgSO4 were evaluated to study the effects of aggressive ions such as chlorides and sulfates on concrete. The weight loss observed ranged from 7.09% to 2.07% in the case of HCl, from 7.96% to 2.86% in the case of MgSO4, from 17.93% to 11.02% in case of H2SO4 for water binder ratio of 0.275 and 56 days of immersion. The percentage reduction in strength after 56 days of immersion for mixes with water binder ratio of 0.275 ranged from 14.39% to 8.92% in HCl, from 14.53% to 9.66% in MgSO4 and 14.81% to 10.92% in H2SO4. The outcomes of the study showed that a combination of 15% ultra-fine fly ash and 3% nanosilica is the optimum replacement level to achieve increased durability, reduced porosity and permeability due to improved macro and micrometer densities of concrete. In addition, steel and polypropylene fibers have also made a small contribution towards improving the durability of Composite Fiber Reinforced High-Performance Concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Residual compressive strength of fly ash based glass fibre reinforced high performance concrete subjected to acid attack10.29121/ijoest.v4.i6.2020.139 ↗
2. High performance concrete—An overview10.1007/BF02486473 ↗
3. High strength concrete containing natural pozzolan and silica fume10.1016/S0958-9465(00)00037-8 ↗
4. Effect Of Replacement Of Cement By Metakalion On The Properties Of High Performance Concrete Subjected To Hydrochloric Acid Attack
5. Experimental study on strength of concrete by using metakaolin and M-Sand
6. Laboratory investigation of nanomaterials to improve the permeability and strength of concrete, Virginia
7. Effects of Fe 2O 3 Nanoparticles on Water Permeability and Strength Assessments of High Strength Self-Compacting Concrete10.1016/S1005-0302(12)60026-7 ↗
8. Influence of nano particles on durability and mechanical properties of high performance concrete10.1016/j.proeng.2011.07.382 ↗
9. Influence of nanosilica on mechanical and durability properties of concrete
10. Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review10.1016/j.conbuildmat.2018.05.266 ↗
11. Pore structure refinement of cement paste incorporating nanosilica: Study with dual beam scanning electron microscopy/focused ion beam (SEM/FIB)10.1016/j.matchar.2018.08.045 ↗
12. Improvement of concrete durability by nanomaterials
13. Strength and durability behaviour of nano silica on high performance concrete10.14419/ijet.v7i3.12.16118 ↗
14. Mehta · 2006
15. An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete10.1016/j.matdes.2013.03.046 ↗
16. Durability performances of concrete with nano-silica10.1016/j.conbuildmat.2014.10.014 ↗
17. Chloride Permeability and Microstructure of Portland Cement Mortars Incorporating Nanomaterials10.3141/2070-03 ↗
18. Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar10.1016/j.cemconres.2003.11.021 ↗
19. Effect of fly ash fineness on compressive strength and pore size of blended cement paste10.1016/j.cemconcomp.2004.07.003 ↗
20. Role of super fine fly ash on high performance concrete
21. Research on hydration mechanism of ultrafine fly ash and cement composite10.1016/j.conbuildmat.2019.116697 ↗
22. Effects of ultrafine fly ash on the properties of high-strength concrete10.1007/s10973-015-4567-3 ↗
23. Properties of Concrete Incorporating Ultrafine Fly Ash and Silica Fume10.3141/2113-05 ↗
24. Properties of high-strength concrete using a fine fly ash10.1016/S0008-8846(98)00125-2 ↗
25. Influence of Ultrafine Fly Ash on the Early Age Response and the Shrinkage Cracking Potential of Concrete10.1061/(ASCE)0899-1561(2005)17:1(45) ↗
26. Karthik H. Obla Michael D. A. Thomas Surali G. Shashiprakash and, R.L.H. Olga Perebatova properties of concrete containing ultra-fine fly ash, ACI Mater. J. 100 (2003). 10.14359/12819**10.14359/12819 ↗
27. Laboratory Investigation of Ultra-High–Performance Fiber-Reinforced Concrete Modified with Nanomaterials10.1520/JTE20180806 ↗
28. Experimental and mechanical performance of shotcrete made with nanomaterials and fiber reinforcement10.1016/j.conbuildmat.2017.12.199 ↗
29. K.J. Folliard, D. Sutfin, R. Turner, D.P. Whitney, Fiber in Continuously Reinforced Concrete Pavements, 2006.
30. Laboratory evaluation of self-compacting fiber-reinforced concrete modified with hybrid of nanomaterials
31. ASTM C1585–04, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
32. ASTM C1202 - 19 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, (n.d.). https://www.astm.org/Standards/C1202, (accessed April 4, 2020).
33. BIS (Bureau of Indian Standards) (2013) IS 516 (1959): Method of Tests for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.