journal article·2021-02

Raw material ratio optimisation of magnesium oxychloride cement using response surface method

Ke Li, Yuansheng Wang, Xiao Zhang, Xuan Wang, Aimin Zhang

Publisher page

Abstract

Abstract To improve the mechanical properties of magnesium oxychloride (MOC) cement, its raw materials ratio was optimized using the response surface method (RSM). The effects of the molar ratios of MgO/MgCl2 and H2O/MgCl2 on the compressive strength of MOC cement was were analysed using single-factor tests. Based on the results of the single-factor analysis, the factors and levels of the response surface test were determined. The response surface was established using a binary cubic equation, which fit well with the experimental data. It was predicted by RSM that when the molar ratio of MgO:MgCl2:H2O is 7.56:1:13.51, the compressive strength of the MOC cement would be the highest. The compressive strength of the samples fabricated according to the predicted ratio was 105.48 MPa, and the experimental value was 6.29% higher than the predicted value. The factors contributing to the high strength of the optimised samples were explained using X-ray diffraction and scanning electron microscopy, and it was proved that RSM had a guiding significance in optimising the performance of MOC cement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. On a new magnesium cement
2. Light-weight wood-magnesium oxychloride cement composite building products made by extrusion10.1016/j.conbuildmat.2011.07.033 ↗
3. Identification of magnesium oxychloride cement biomaterial heterogeneity using Raman chemical mapping and NIR hyperspectral chemical imaging10.1038/s41598-018-31379-5 ↗
4. Magnesia-based cements: a journey of 150 years, and cements for the future?10.1021/acs.chemrev.5b00463 ↗
5. Effect of magnesium oxychloride cement on stabilization/solidification of sewage sludge10.1016/j.conbuildmat.2009.08.011 ↗
6. Experimental study on urban refuse/magnesium oxychloride cement compound floor tile10.1016/S0008-8846(03)00136-4 ↗
7. Removal of methyl orange and bromophenol blue dyes from aqueous solution using Sorel’s cement nanoparticles10.1016/j.jece.2015.06.022 ↗
8. Removal of synthetic reactive dyes from textile wastewater by Sorel's cement10.1016/j.jhazmat.2008.05.138 ↗
9. Compressive strength of fly ash magnesium oxychloride cement containing granite wastes10.1016/j.conbuildmat.2012.06.016 ↗
10. Influence of curing temperature on the evolution of magnesium oxychloride cement10.1007/s10853-011-5628-z ↗
11. Experimental determination of the solubility constant for magnesium chloride hydroxide hydrate (Mg3Cl(OH)5·4H2O, phase 5) at room temperature, and its importance to nuclear waste isolation in geological repositories in salt formations10.1016/j.gca.2010.05.029 ↗
12. Influence of MgO/MgCl2 molar ratio on phase stability of magnesium oxychloride cement10.1007/s11595-009-3476-3 ↗
13. Investigations on the properties of magnesium oxychloride cement produced by in situ and classic methods
14. Magnesium oxychloride cement concrete10.1007/s12034-007-0043-4 ↗
15. The system MgO-MgCl2-H2O at 23 ℃10.1111/j.1151-2916.1980.tb10752.x ↗
16. Influence of raw material ratio of magnesium oxychloride cement on the compressive strength of solidified gravel soil, Chin
17. Influence of molar ratios on properties of magnesium oxychloride cement10.1016/j.cemconres.2007.03.015 ↗
18. J. Wen, H.F. Yu, X.Y. Xiao, J.M. Dong, Influence of Materials Ratio on the Hydration Process of Magnesium Oxychloride Cement, Materials Science Forum, Trans Tech Publ, 2015, pp. 180-184.10.4028/www.scientific.net/MSF.817.180 ↗
19. The influence of composition and temperature on hydrated phase assemblages in magnesium oxychloride cements10.1111/jace.14817 ↗
20. Tuning the phase structure and mechanical performance of magnesium oxychloride cements by curing temperature and H2O/MgCl2 ratio10.1016/j.conbuildmat.2018.05.257 ↗
21. Simulation of the properties of MgO-MgCl2 -H2O system by thermodynamic method10.1016/j.cemconres.2014.11.006 ↗
22. The Extraction of pepsin-soluble collagen from grass carp (Ctenopharyngodon idella) skin using an artificial neural network10.1016/j.foodchem.2008.04.037 ↗
23. The Extraction optimization of pepsin-soluble collagen from eggshell be by response surface methodology (RSM)10.1016/j.foodchem.2015.05.073 ↗
24. Optimization of extraction process of petroleum polysaccharides from the boat-fruited sterculia seeds by response surface methodology10.1016/j.foodchem.2007.03.066 ↗
25. Effect of tartaric acid and phosphoric acid on the water resistance of magnesium oxychloride (MOC) cement10.1016/j.conbuildmat.2019.04.086 ↗
26. GB/T 17671-1999, Method of testing cements-Determination of strength. Beijing: Administration of Quality Supervision, Inspection and Quarantine.
27. The mechanism for soluble phosphates to improve the water resistance of magnesium oxychloride cement10.1016/S0008-8846(03)00043-7 ↗