journal article·2021-03

Effective control of flexible asphalt pavement cracking through quality assurance testing of extracted and recovered binders

Yiming Li, Haibo Ding, Yihua Nie, Simon A.M. Hesp

Publisher page

Abstract

Abstract A total of 54 asphalt binders were obtained from six different Canadian (four municipalities) and United States (two State Departments of Transportation (DOTs)) user agencies. Regular AASHTO M 320 grades, critical crack tip opening displacements (CTOD), extended bending beam rheometer (EBBR) limiting low temperature grades (LLTG), and limiting phase angles grades T(δ = 30°) and T(δ = 45°), were determined for tank-sampled and extracted and recovered materials. While nearly all binders sampled from storage tanks at asphalt plants pass regular contract quality assurance (QA) requirements with ease, enhanced test methods showed major variability for materials of ostensibly the same AASHTO M 320 grade. The CTOD provides a measure of strain tolerance in the ductile state around the freeze-thaw regime. It ranged from a low of 8.4 mm for a contract in a PG minus 28 zone—likely burdened by too much reclaimed asphalt pavement (RAP) and/or poor virgin binder quality—to a high of 48.4 mm for a contract in a PG minus 34 zone. The CTOD varied by as much as threefold within the same climatic zone. Tank samples graded consistently better according to the CTOD compared to recovered binders, at times in a major way. Grade losses due to cold conditioning in the extended BBR protocol, which provide a measure of durability, ranged from a negligible 0.9 °C to a very significant 9.1 °C after only 72 h of cold conditioning. The EBBR LLTG was found to be highly correlated with the T(δ = 30°) grade (R2 = 0.85), and somewhat less correlated with T(δ = 45°) (R2 = 0.74). The CTOD was found to be highly correlated with the T(δ = 45°) (R2 = 0.90), and somewhat less correlated with the T(δ = 30°) grade (R2 = 0.86). Hence, the two limiting phase angle temperatures may be used, in the future, in a more precise, accurate, and practical specification protocol for the control of cold temperature cracking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. C.M. Baskin. Written discussion. Proceedings, American Society for Testing and Materials, Part II, Vol. 35, 1935, pp. 576–579.
2. Quality of paving grade bitumen–a practical approach in terms of functional tests
3. A 4-year survey of low temperature transverse pavement cracking on the three Ontario test roads
4. Preliminary experience with improved asphalt cement specifications in the City of Kingston, Ontario, Canada10.1016/j.conbuildmat.2017.09.118 ↗
5. S.A.M. Hesp, S. Subramani. Another look at the bending beam rheometer for specification grading of asphalt cements. Proceedings, 6th MAIREPAV Conference, Torino, Italy, 2009.
6. Durability of asphalt concrete subjected to deteriorating effects of water and frost10.1061/(ASCE)CF.1943-5509.0000645 ↗
7. Performance grading of the Lamont, Alberta C-SHRP pavement trial binders10.1080/10298430600715667 ↗
8. Asphalt pavement cracking: Analysis of extraordinary life cycle variability in eastern and northeastern Ontario10.1080/10298430802343169 ↗
9. Five year performance review of a northern Ontario pavement trial: Validation of Ontario's double-edge-notched tension (DENT) and extended bending beam theometer (BBR) test methods
10. Effect of thermal relaxation on asphalt properties10.1007/BF00749094 ↗
11. Formation of equilibrium structures in bitumens10.1007/BF00725771 ↗
12. Possible role of thermal ratchetting in alligator cracking of asphalt pavements10.1080/10298430902730547 ↗
13. Coupled Navier-Stokes phase-field model to evaluate the microscopic phase separation in asphalt binder under thermal loading10.1061/(ASCE)MT.1943-5533.0001581 ↗
14. Development of SHRP binder specification (with discussion)
15. Increase in viscosity of asphalts with time
16. Development of internal structure in asphalts with time
17. Reversible aging in asphalt binders10.1021/ef060463b ↗
18. Effects of physical hardening on stress relaxation in asphalt cements: Implications for pavement performance10.3141/2207-05 ↗
19. Rheological, fatigue and relaxation properties of aged bitumen10.1080/10298436.2019.1654609 ↗
20. Quantification of crystalline wax in asphalt binders using variable-temperature Fourier-transform infrared spectroscopy10.1016/j.fuel.2020.118220 ↗
21. Effect of controllable variables upon the penetration test for asphalts and asphalt cements
22. Steric hardening of asphalts
23. Viscoelastic properties of a penetration grade paving asphalt at winter temperatures
24. Struik · 1978
25. Interrelation of density, composition, and properties of asphalts10.1007/BF00719118 ↗
26. Characterization of paving asphalts by differential scanning calorimetry10.1080/08843759108942254 ↗
27. Claudy · 1992 · 1408
28. Thermal behavior of asphalt cements10.1016/S0040-6031(98)00537-1 ↗
29. Physical aging in semi-crystalline asphalt binders
30. Low-temperature behavior of bituminous materials
31. Bituminous materials, I. Plasticity and depth of color of bituminous materials
32. The properties of bitumen in relation to the micelle
33. K. Krenkler, E. Jantzen. Bitumen, Teere, Asphalte, Peche, 2 (1951) 59-63.
34. Barth · 1962
35. Asphalt concrete damage associated with extreme low temperatures10.1061/(ASCE)0899-1561(1998)10:4(269) ↗
36. Low temperature performance of SBS-modified asphalt mixes
37. Universal and practical approach to evaluate asphalt binder resistance to thermally-induced surface damage10.1016/j.conbuildmat.2020.119331 ↗
38. Non-isothermal kinetic analysis of reversible ageing in asphalt cements10.1080/14680629.2017.1389070 ↗
39. AASHTO T 313-10, Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR). AASHTO, Washington, DC, 2010.
40. AASHTO T 315-10, Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR). AASHTO, Washington, DC, 2011.
41. Field validation study of low-temperature performance grading tests for asphalt binders10.3141/1875-03 ↗
42. A. Andriescu, S. Iliuta, S. Hesp, J. Youtcheff. Essential and plastic works of ductile fracture in asphalt binders and mixtures. Proceedings, Forty-Ninth Annual Conference of the Canadian Technical Asphalt Association, Montreal, Quebec, 2004.10.3141/1875-01 ↗
43. Essential and plastic works of ductile fracture in asphalt binders10.3141/1875-01 ↗
44. Validation of the essential work of fracture approach to fatigue grading of asphalt binders
45. AASHTO TP 113-15, Determination of Asphalt Binder Resistance to Ductile Failure Using the Double-Edge-Notched Tension (DENT) Test. AASHTO, Washington, D.C., 2015.
46. AASHTO TP 122-16, Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method. AASHTO, Washington, D.C., 2016.
47. Performance grading of extracted and recovered asphalt cements10.1016/j.conbuildmat.2018.07.243 ↗
48. Comparison between thermal, rheological and failure properties for the performance grading of asphalt cements10.1016/j.conbuildmat.2019.05.187 ↗
49. Repeatability, reproducibility, and sensitivity assessments of thermal and fatigue cracking acceptance criteria for asphalt cement10.1016/j.conbuildmat.2019.117956 ↗
50. Durability assessment of asphalt binder10.1016/j.conbuildmat.2018.01.037 ↗
51. Asphalt cement loss tangent as surrogate performance indicator for control of thermal cracking10.3141/2126-05 ↗
52. AASHTO R 28, Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV). AASHTO, Washington, D.C., 2009.
53. AASHTO M320-10, Standard Specification for Performance-Graded Asphalt Binder. AASHTO, Washington, D.C., 2010.
54. Development of Superpave high-temperature performance grade (PG) based on rutting damage (with discussion and closure)