New geopolymers from industrial by-products: Olive biomass fly ash and chamotte as raw materials
Source abstract
Abstract
Abstract This research presents the feasibility of a geopolymer fully prepared using chamotte, ceramic industry residue, and fly ash from olive biomass, residue from the olive oil industry. A typical ceramic characterization was carried out from a mechanical and physical standpoint, aimed at exploring their potential as a building material in order to reuse this currently unused waste and to reduce clay extraction operations. Based on the obtained tests results, binder samples showed promising mechanical properties with compressive strengths of over 50 MPa, leading to sustainable raw materials for traditional ceramics in certain applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Production of bricks from waste materials – A review10.1016/j.conbuildmat.2013.05.043 ↗
2. European Enviromment Agency. (2019). Annual European Union greenhouse gas inventory 1990-2017 and inventory report 2019. Retrieved from https://www.eea.europa.eu/publications/european-union-greenhouse-gas-inventory-2019. Accessed February 1, 2020.
3. Exploratory study on the effect of waste rice husk and sugarcane bagasse ashes in burnt clay bricks10.1016/j.jobe.2016.08.001 ↗
4. Manufacturing of sustainable clay bricks: Utilization of waste sugarcane bagasse and rice husk ashes10.1016/j.conbuildmat.2016.05.084 ↗
5. Strength, durability, thermal and run-off properties of fired clay roof tiles incorporated with ceramic sludge10.1016/j.conbuildmat.2018.05.187 ↗
6. Geopolymer synthesis by the alkali-activation of blastfurnace steel slag and its fire-resistance10.1016/j.hbrcj.2016.06.001 ↗
7. Rahhal, V.F.; Trezza, M.A.; Tironi, A.; Castellano, C..; Pavlíková, M.; Pokorný, J.; Irassar, E.F.; Jankovský, O.; Pavlík, Z. Complex Characterization and Behavior of Waste Fired Brick Powder-Portland Cement System. Materials. 12 (2019) 1650. https://doi.org/10.3390/ma12101650.10.3390/ma12101650 ↗
8. Rahman, M.T.; Mohajerani, A.; Giustozzi, F. Recycling of Waste Materials for Asphalt Concrete and Bitumen: A Review. Materials. 13 (2020) 1495. https://doi.org/10.3390/ma13071495.10.3390/ma13071495 ↗
9. Meor Ahmad Tajudin, Meor Ahmad Faris & Abdullah, Mohd Mustafa Al Bakri & Sandu, Andrei Victor & Nizar, Khairul & Moga, Ligia & Neculai, Oana & Muniandy, Ratnasamy.Assessment of alkali activated geopolymer binders as an alternative of portlant cement. Materiale Plastice. 54 (2017) 145-154.10.37358/MP.17.1.4806 ↗
10. Ambient and Elevated Temperature Geopolymerization Behaviour of Class F Fly Ash10.1080/0371750X.2014.922428 ↗
11. The use of industrial ceramic waste (brick powder) to improve product quality in ceramic elements manufacture: An experimental study
12. Reuse of waste bricks in the production line10.1016/S0360-1323(03)00140-9 ↗
13. Vieira, C.M.F.; Monteiro, S.N. Effect of the particle size of the grog on the properties and microstructure of bricks. Mater. Sci. Forum. 530 (2016) 438–443. https://doi.org/10.4028/www.scientific.net/MSF.530-531.438.10.4028/www.scientific.net/MSF.530-531.438 ↗
14. Effect of grog addition on the properties and microstructure of a red ceramic body for brick production10.1016/j.conbuildmat.2006.05.013 ↗
15. Orimulsion fly ash in clay bricks. Part 1: Composition and thermal behavior of ash10.1016/S0955-2219(01)00493-9 ↗
16. Orimulsion fly ash in clay bricks. Part 2: Technological behavior of clay/ash mixtures10.1016/S0955-2219(01)00494-0 ↗
17. Orimulsion fly ash in clay bricks—part 310.1016/S0955-2219(01)00495-2 ↗
18. Firewood ash for application in red ceramic10.1590/S0366-69132005000300004 ↗
19. Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production10.1016/j.psep.2016.08.001 ↗
20. Mechanical properties of concretes with recycled aggregates and waste brick powder as cement replacement10.1016/j.proeng.2017.01.396 ↗
21. Blended alkali-activated fly ash/brick powder materials10.1016/j.proeng.2016.07.397 ↗
22. Reuse of waste bricks: a new generation of geopolymer bricks10.1007/s42452-019-1209-6 ↗
23. Reuse Research Progress on Waste Clay Brick10.1016/j.proenv.2016.02.029 ↗
24. Production of refractory chamotte particle-reinforced geopolymer composite10.1088/1757-899X/123/1/012041 ↗
25. Thermomechanical properties of particle-reinforced geopolymer composite with various aggregate gradation of fine ceramic filler10.1016/j.conbuildmat.2017.03.134 ↗
26. Davidovits, Joseph. (1994). Properties of Geopolymer Cements. SRIBM, Kiev. 1. (1994) 131-149.
27. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
28. Reig, L. & Tashima, Mauro & Borrachero, M. & Monzo, J. & Cheeseman, C.R. & Payá, Jordi. Properties and microstructure of alkali-activated red clay brick waste. Construction and Building Materials. 43 (2013) 98–106. https://doi.org/ 10.1016/j.conbuildmat.2013.01.031.10.1016/j.conbuildmat.2013.01.031 ↗
29. Methods of Granulometric Analysis: application in the Granulometry Control of Raw Materials
30. Recycling waste materials in geopolymer concrete10.1007/s10098-018-01660-2 ↗
31. Romero, Esperanza & Quirantes, Mar & Nogales, Rogelio. Characterization of biomass ashes produced at different temperatures from olive-oil-industry and greenhouse vegetable wastes. Fuel. 208 (2017) 1-9. https:// 10.1016/j.fuel.2017.06.13310.1016/j.fuel.2017.06.133 ↗
32. Reduction of Leaching Impacts by Applying Biomass Bottom Ash and Recycled Mixed Aggregates in Structural Layers of Roads10.3390/ma9040228 ↗
33. Effect of Particle Size on Properties of Sidoarjo Mud-Based Geopolymer10.4028/www.scientific.net/MSF.803.44 ↗
34. The Use of Industrial Ceramic Waste - Brick Powder - to Improve Product Quality in Ceramic Elements Manufacture: an Experimental Study
35. Reuse of waste bricks in the production line10.1016/S0360-1323(03)00140-9 ↗
36. Effect of the particle size of the grog on the properties and microstructure of bricks