journal article·2021-06

Behaviour of screw connections in timber-concrete composites using low strength lightweight concrete

Elif Appavuravther, Bram Vandoren, Jose Henriques

Publisher page

Abstract

Abstract In this paper, the use of low strength lightweight concrete in combination with glue-laminated timber (TLCC) is studied. Six series of push-out tests were conducted to assess the mechanical performance of the screw shear connection between these materials with a perpendicular and inclined (shear-compression) configuration with various screw diameters and lengths. The tests show that though low strength lightweight concrete is used, composite action can still be obtained. Given the equivalent Young’s modulus between the concrete and the timber, a proposal is made consisting in the use of the design approach for timber-to-timber connections in order to determine the load capacity of the tested connections, contrary of what is commonly used in the literature. The comparison with experimental tests confirm the proposed approach.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M. Van der Linden, “Timber-Concrete Composite Floor Systems,” PhD Dissertation, Technical University of Delft, Delft, The Netherlands, 1999.
2. Jorge · 2005
3. S. Carvalho, T. Panzera, A. Christoforo, J. Fiorelli, F. Lahr, R. Freire, “Epoxy mortar timber beam upgrading,” Int. Wood Products J., 2017.10.1080/20426445.2017.1335937 ↗
4. T. Zahra, M. Dhanasekar, “A generalised damage model for masonry under compression,” Int. J. Damage Mech., 25 (5) (2016) 629-660.10.1177/1056789516656745 ↗
5. L.F. Jorge, J. Schanzlin, S. Lopes, H. Cruz, U. Kuhlmann, “Time-dependent behaviour of timber lightweight concrete composite floors,” (in English), Eng. Struct. 32 (12) (2010) 3966-3973.10.1016/j.engstruct.2010.09.007 ↗
6. EN 1995-1-1 - Design of timber structures - Part 1-1: General rules and rules for buildings, E. C. f. Standardization, 2004.
7. EN 1995-2 - Design of timber structures - Part 2: Bridges, E. C. f. Standardization, 2004.
8. Dias · 2005
9. E. Lukaszewska, “Development of Prefabricated Timber-Concrete Composite Floors,” PhD, Department of Civil, Mining and Environmental Engineering, Lulea University of Technology, Sweden, 2009.
10. M. Fragiacomo, C. Amadio, L. Macorini, “Short- and long-term performance of the ”Tecnaria“ stud connector for timber-concrete composite beams,” (in English), Mater. Struct., 40 (10) (2007) 1013-1026.10.1617/s11527-006-9200-2 ↗
11. COST, Design of timber-concrete composite structures - A state-of-the-art report by COST Action FP1402 / WG 4. Shaker Verlag Aachen, 2018.
12. COST, C. Sandhaas, J. Munch-Andersen, and P. Dietsch, Eds. Design of Connections in Timber Structures. 2018.
13. L. Marchi, R. Scotta, L. Pozza, “Experimental and theoretical evaluation of TCC connections with inclined self-tapping screws,” (in English), Mater. Struct., 50 (3) (2017) Art. no. ARTN 180.10.1617/s11527-017-1047-1 ↗
14. R. Tomasi, A. Crosatti, M. Piazza, “Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws,” (in English), Construction Build. Mater., 24 (9)pp. 1560-1571 (2010).10.1016/j.conbuildmat.2010.03.007 ↗
15. H. Blass, I. Bejtka, “Screws with continuous threads in timber connections,” presented at the RILEM, 2001.
16. Bejtka · 2002
17. Kevarinmaki · 2002
18. Study on shear behavior of inclined cross lag screws for glulam-concrete composite beams10.1016/j.conbuildmat.2019.07.035 ↗
19. H. Du, X. Hu, Y. Jiang, C. Wei, W. Hong, “Load-carrying Capacity of Self-tapping Lag Screws for Glulam-lightweight Concrete Composite Beams,” (in English), Bioresources, 14 (1) (2019) 166-179.10.15376/biores.14.1.166-179 ↗
20. A. Dias, F. Fragiacomo, R. Harris, P. Kuklic, V. Rajicic, J. Schanzlin, “Technical Specification – Final Draft - Eurocode 5: Design of Timber Structures - Part 1-3: Structural design of timber concrete composite structures – Final Draft / Project Team CEN/TC 250- SC5.T2,” 2019.
21. K. Johansen, “Theory of timber connections,” International association of bridge and structural engineering, vol. 9, pp. 249-262, 1949.
22. EN 1992-2 Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules, E. C. f. Standardization, 2004.
23. J. Porteous, A. Kermani, Structural timber design to Eurocode 5. Oxford ; Malden, MA: Blackwell Pub., 2007, pp. xii, 542 p.10.1002/9780470697818 ↗
24. Mechanical behaviour of timber-to-concrete connections with inclined screws10.3846/13923730.2007.9636437 ↗
25. ETA-13/0029, “Self-tapping screws for use in wood-concrete slab kits,” ed. ETA-Denmark A/S, 2017.
26. EN 1992-4 Design of concrete structures - Part 4: Design of fastenings for use in concrete, 2018.
27. A. Dias, F. Fragiacomo, R. Harris, P. Kuklic, V. Rajicic, J. Schanzlin, “Technical Specification – Background Document - Eurocode 5: Design of Timber Structures; Structural design of timber concrete composite structures – common rules for buildings / Project Team CEN/TC 250- SC5.T2,” 2019.
28. EN 12512 - Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners, 2002.
29. General notes on ductility in timber structures10.1016/j.engstruct.2011.07.024 ↗
30. EN 14080 Timber structures—glued laminated timber and glued solid timber—requirements, 2013.
31. EN 1992-1-1 Design of concrete structures - Part 1-1: General rules and rules for buildings, E. C. f. Standardization, 2004.
32. EN 12390-3 Testing hardened concrete - Part 3: Compressive strength of test specimens, 2009.
33. L. Jorge, S. Lopes, H. Cruz, “Experimental research in timber-LWAC composite structures,” in International Symposium on Advanced Timber and Timber-Composite Elements for Buildings, Florence, Italy, 2004, pp. 97-104.
34. C. Bedon, M. Fragiacomo, “Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws,” (in English), Composite Structures, Article vol. 207, pp. 13-28, JAN 1 2019 2019.10.1016/j.compstruct.2018.09.008 ↗