journal article·2021-08

Sustainable use of municipal solid waste incinerator bottom ash and the treated industrial wastewater in self-compacting concrete

Abolfazl Taherlou, Gholamreza Asadollahfardi, Amir Masoud Salehi, Ali Katebi

Publisher page

Abstract

Abstract The vast amount of solid waste landfilling and discharging of wastewater in surface water or groundwater increases water pollution. Therefore, reusing solid waste and wastewater is vital. We studied the feasibility of using different percentages of simultaneous municipal solid waste incineration bottom ash (MSWIBA) and the treated industrial wastewater in self-compacting concrete (SCC). Also, producing concrete using MSWIBA and tap water was performed. The workability (Slump flow, J-ring, T50, V-funnel, sieve segregation, and Visual Stability Index tests), mechanical property (compressive strength), durability (water adsorption and rapid chloride penetration tests), Scanning Electron Microscope (SEM) image, and Toxicity Characteristic Leaching Procedure (TCLP) of SCCs were carried out. The workability of different SCCs mixtures, including different percent of MSWIBA (replacing instead of natural aggregates) with tap water or the treated industrial wastewater, was reached the suitable level and satisfied European guidelines for SCCs and ASTM C1585 by adopting the rate of superplasticizer. The results indicated that the compressive strength decreased with increasing the MSWIBA content in concrete samples using tap water. However, using MSWIBA and the treated industrial wastewater led to increasing compressive strength compared to SCC using both MSWIBA and tap water. When it was used MSWIBA and the treated industrial wastewater simultaneously in SCCs, the water adsorption and rapid chloride permeability test (RCPT) results decreased compared to the concrete samples using MSWIBA and tap water. The SEM images present fewer pores and cracks while using the treated industrial wastewater in SCCs. The TCLP results of SCCs include concurrent MSWIBA, and the treated wastewater is below the U.S. Environmental Protection Agency (EPA) 1311.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. L. Bertolini, M. Carsana, D. Cassago, A. Q. Curzio, M. Collepardi, MSWI ashes as mineral additions in concrete, Cem. Concr. Res. 34(10) 2004 1899–1906. https://doi.org/10.1016/j.cemconres.2004.02.001.10.1016/j.cemconres.2004.02.001 ↗
2. M. Kosior-Kazberuk, Application of SSA as partial replacement of aggregate in concrete, Polish J. Environ. Stud. 20(2) 2011 365–370.
3. M. Jamshidi, A. Jamshidi, N. Mehrdadi, F. Pacheco-Torgal, Mechanical performance and capillary water absorption of sewage sludge ash concrete (SSAC), Int. J. Sustain. Eng. 5(3) 2012 228–234. https://doi.org/10.1080/19397038.2011.642020.10.1080/19397038.2011.642020 ↗
4. Stabilization and solidification of incinerator bottom ash using portland cement and silica fume
5. Effects of sewage sludge ashes addition in portland cement concretes
6. J.M. Paris, J. G. Roessler, C.C. Ferraro, H.D. Deford, T.G. Townsend, A review of waste products utilized as supplements to Portland cement in concrete, J. Clean. Prod., 121 2016 1–18. https://doi.org/10.1016/j.jclepro.2016.02.013.10.1016/j.jclepro.2016.02.013 ↗
7. S. Casanova, R.V. Silva, J.de Brito, M.F.C. Pereira. Mortars with alkali-activated municipal solid waste incinerator bottom ash and fine recycled aggregates, J. Clean. Prod. 289 2021 125707 10.1016/j.jclepro.2020.125707.10.1016/j.jclepro.2020.125707 ↗
8. JJ. Gražulytė, A. Vaitkus, O. Šernas, L. Žalimienė. The impact of MSWI bottom ash as aggregate on concrete mechanical performance, Int. J. Pave. 2021 https://doi.org/10.1080/10298436.2021.1873333.10.1080/10298436.2021.1873333 ↗
9. S. Zhang, Z. Ghouleh, Z. He, L. Hu, Y. Shao, Materials Use of municipal solid waste incineration bottom ash as a supplementary cementitious material in dry-cast concrete, Constr. Build. Mater. 266 (2021) 120890. https://doi.org/10.1016/j.conbuildmat.2020.120890.10.1016/j.conbuildmat.2020.120890 ↗
10. Ternary mixes of self-compacting concrete with fly ash and municipal solid waste incinerator bottom ash10.3390/app11010107 ↗
11. Municipal solid waste incineration bottom ash fines: Transformation into a minor additional constituent for cements
12. Use of ready-mixed concrete plant sludge water in concrete containing an additive or admixture10.1016/j.jenvman.2009.01.008 ↗
13. ASTM C1602, C1602M-12, Specification for mixing water used in the production of hydralic cement concrete, ASTM international West Conshohocken PA.2012. http://www.astm.org/cgi-bin/resolver.cgi?C1602C1602M-12.
14. Effect of using wastewater on the properties of high strength concrete10.1016/j.proeng.2011.07.046 ↗
15. S.O. Ekolu A. Dawneerangen, Evaluation of recycled water recovered from a ready-mix concrete plant for reuse in concrete, J. South African Inst. Civ. Eng. 52 (2) 2010 77–82.
16. Z.Z. Ismail, E.A. Al-Hashmi, Assessing the recycling potential of industrial wastewater to replace freshwater in concrete mixes: application of polyvinyl acetate resin wastewater, J. Clean. Prod., 19(2-3) 2011 197–203. http//org.do/10.1016/j.jclepro.2010.09.011.10.1016/j.jclepro.2010.09.011 ↗
17. Experimental and statistical studies of using wash water from ready-mix concrete trucks and a batching plant in the production of fresh concrete10.1016/j.conbuildmat.2015.08.053 ↗
18. Use of treated domestic wastewater before chlorination to produce and cure concrete10.1016/j.conbuildmat.2015.12.039 ↗
19. M. Sheikh. Hassani, G. Asadollahfardi, S.F. Saghravani, S. Jafari, F.S. Peighambarzadeh, The difference in chloride ion diffusion coefficient of concrete made with drinking water and wastewater, Constr. Build. Mater. 231 2020 253-261. https://doi.org/10.1016/j.conbuildmat.2019.117182.10.1016/j.conbuildmat.2019.117182 ↗
20. Effect of wastewater on properties of concrete10.1016/j.jobe.2018.10.003 ↗
21. The feasibility of using treated industrial wastewater to produce concrete10.1002/suco.201700255 ↗
22. Use of recycled water from mixer truck wash in concrete: effect on the hydration, fresh and hardened properties10.1016/j.conbuildmat.2019.116981 ↗
23. B. Yahyaei, G. Asadollahfardi, A.M. Salehi, Workability, mechanical, and durability properties of self-compacting concrete using the treated wastewater, Struct. Concr. 22(2021) S1 E997-E1008. https://doi.org/10.1002/suco.201900447.10.1002/suco.201900447 ↗
24. A. Raza, U. Rafique, F. ul Haq. Mechanical and durability behavior of recycled aggregate concrete made with different kinds of wastewater, J. Build. Eng. 34 2021 e101950 https://doi.org/10.1016/j.jobe.2020.101950.10.1016/j.jobe.2020.101950 ↗
25. ASTM C 150/C 150M - 09, Standard Specification for Portland Cement, ASTM Int. West Conshohocken, PA, 2009 www.scribd.com/document/206853676.
26. ASTM C136/C136M-14, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA, 2014. https://doi.org/10.1520/c0136-05.10.1520/C0136-05 ↗
27. A. Ferraro, I. Farina, M. Race, F. Colangelo, R. Cioffi, M. Fabbricino, Pre-treatments of MSWI fly-ashes: a comprehensive review to determine optimal conditions for their reuse and/or environmentally sustainable disposal, Rev. Environ. Sci. Bio/Tec. 18 2019 453–471.10.1007/s11157-019-09504-1 ↗
28. A. Ferraro, F. Colangelo, I. Farina, M. Race, R. Cioffi, C. Cheeseman M. Fabbricino. Cold-bonding process for treatment and reuse of waste materials: Technical designs and applications of pelletized products, Crit. Rev.Environ. Sci. Technol. 2020 https:// org.do/ 10.1080/10643389.2020.1776052.10.1080/10643389.2020.1776052 ↗
29. On utilization and mechanisms of waste aluminum in mitigating alkali-silica reaction (ASR) in concrete10.1016/j.jclepro.2018.11.288 ↗
30. ASTM C494/C494M-13, Standard Specification for Chemical Admixtures for Concrete,” Annu. B. ASTM Stand., ASTM Int. West Conshohocken, PA.2013.
31. ASTM C94, Standard Specification for Ready-Mixed Concrete, Annu. B. ASTM Stand., ASTM Int. West Conshohocken, PA, USA, 2016.
32. ASTM E1621-13, Standard Guide for elemental analysis by wavelength dispersive X-Ray fluorescence spectrometry, Annu. B. ASTM Stand., 2013.ASTM Int. West Conshohocken, PA.USA, 2013.
33. BS EN 13925-1 Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. General principles, UK, 2003.
34. ASTM C1611/C1611M-14 Standard Test Method for Slump Flow of Self-Consolidating Concrete, Annu. B. ASTM Stand. West Conshohocken, PA, USA, 2014.
35. ASTM C1621/ C 1621M-09b Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring, Annu. B. ASTM Stand. West Conshohocken, PA, USA, 2014.
36. B. S. 12350-9 Institution, Testing fresh concrete Part 9: Self-compacting concrete -V-funnel test, UK, 2010.
37. BS 12350-11,, Testing fresh concrete Part 11: Self-compacting concrete - Sieve segregation test, UK, 2010.
38. BS EN 12390-3 Testing hardened concrete: Compressive strength of test specimens, UK, 2009.
39. BS 1881-122, BSI Standards Publication Testing concrete — Part 122 : Methods for mixing and sampling fresh concrete in the laboratory, Br. Stand., UK, 2013.
40. ASTM C1202, Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, Annu. B. ASTM Stand., West Conshohocken, USA, 2012.
41. U. S. EPA, EPA Method 1311, SW-846 Test Method 1311: Toxicity Characteristic Leaching Procedure, USA, 2013.
42. ASTM C1723, Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy1, Annu. B. ASTM Stand West Conshohocken, USA, 2006.
43. EFNARC, Specification and Guidelines for Self-Compacting Concrete,” Rep. from EFNARC, vol. 44, no. p. 32, 2002.
44. EFNARC, The European Guidelines for Self-Compacting Concrete, Eur. Guidel. Self Compact. Concr., no. p. 63, 2005.
45. Properties of SCC with supplementary cementing materials, properties and applications
46. J. Pera, L. Coutaz, J. Ambroise, M. Chababbet, Use of incinerator bottom ash in concrete, Cem. Concr. Res. 27 (1) 1997 1–5. https://doi.org/10.1016/S0008-8846(96)00193-7.10.1016/S0008-8846(96)00193-7 ↗
47. J.R. Pan, C. Huang, J.J. Kuo, S.H. Lin, Recycling MSWI bottom and fly ash as raw materials for Portland cement, Waste Manag. 28(7) 2008 1113–1118. https://doi.org/10.1016/j.wasman.2007.04.009.10.1016/j.wasman.2007.04.009 ↗
48. U. Müller, K. Rübner, The microstructure of concrete made with municipal waste incinerator bottom ash as an aggregate component, Cem. Concr. Res. 36(8) 2006 1434–1443. https://doi.org/10.1016/j.cemconres.2006.03.023.10.1016/j.cemconres.2006.03.023 ↗
49. Z. Zhang, L. Zhang, Y. Yin, X. Liang, A. Li, The recycling of incinerated sewage sludge ash as a raw material for CaO–Al2 O3 –SiO 2 –P2 O5 glass-ceramic production, Environ. Technol. 36(9) 2015 1098–1103. https://doi.org/10.1080/09593330.2014.982208.10.1080/09593330.2014.982208 ↗
50. J. An, J. Kim, B.H. Nam, Investigation on impacts of municipal solid waste incineration bottom ash on cement hydration, ACI Mater. J. 114(5) 2017 701–711. http://org.doi/10.14359/51689712.10.14359/51689712 ↗
51. N.H. Jun, M.M.A.B. Abdullah, T.S. Jin, A.A. Kadir, C.A. Tugui, A.V. Sandu, Use of incineration solid waste bottom ash as cement mixture in cement production, IOP Conf. Ser. Mater. Sci. Eng. 209(1) 2017 012082.http://org.doi/10.1088/1757-899X/209/1/012082.10.1088/1757-899X/209/1/012082 ↗
52. BHRC R-434 Assessing concrete durability with different types of cement and pozzolan Persian Gulf and environment. in Persian. 2006.
53. M. Machaka, J. Khatib, A. Elkordi, H. Ghanem, O. Baalbaki, Selected properties of concrete containing municipal solid waste incineration bottom ash (MSWI-BA), Sustain. Constr. Mater.5th Inter. Conf. on Sustain. Constr. Mater. and Techno. (SCMT5), Kingston University London (in Partnership with Coventry University), UK, 14 – 17 July 2019. http://org.doi/10.18552/2019/IDSCMT5099.
54. H.-L. Luo, W.-C. Chang, D.-F. Lin, The effects of different types of nano-silicon dioxide additives on the properties of sludge ash mortar, J. Air Waste Manage. Assoc. 59(4) 2009 440–446. http://org.doi/10.3155/1047-3289.59.4.440.10.3155/1047-3289.59.4.440 ↗
55. J.S. Chen, P.H. Kuo, L.S. Huang, Engineering and environmental characterization of municipal solid waste bottom ash applied to asphalt concrete, J. Chinese Inst. Civ. Hydraul. Eng. 24(1) 2012 25–32.
56. X. Wang, W. Yuan, H. Yuan. Cement-based solidification of incinerated sewage sludge ash by the addition of a novel solidifying aid, Int. J. Waste Resour. 5(4) 2015, 1-5. http://org.doi/10.4172/2252-5211.100018.10.4172/2252-5211.1000185 ↗
57. H.- S. Shi, L.-L Kan, Leaching behavior of heavy metals from municipal solid wastes incineration (MSWI) fly ash used in concrete, J. Hazard. Mater. 164(2-3) 2009 750–754. https://doi.org/10.1016/j.jhazmat.2008.08.077.10.1016/j.jhazmat.2008.08.077 ↗
58. Assessment and mechanism analysis of municipal solid waste incineration bottom ash as aggregate in cement stabilized macadam10.1016/j.jclepro.2019.118750 ↗