Effect of polyvinyl alcohol fiber on the cracking risk of high strength concrete under uniaxial restrained condition at early age
Source abstract
Abstract
Abstract Fiber materials with toughening effect can enhance the tensile strength of concrete, reduce shrinkage, and decrease the possibility of concrete cracking. Despite substantial previous researches, the effect of polyvinyl alcohol fiber (PVAF) on the cracking risk of high strength concrete (HSC) under the uniaxial restrained condition and adiabatic curing mode is hardly investigated. Accordingly, the early-age temperature, autogenous shrinkage (AS), creep, and restrained stress of concrete reinforced with different volume fractions of PVAF (0%, 0.2%, 0.4%, and 0.6% of concrete by volume, respectively) under the uniaxial restrained condition and adiabatic curing mode were further investigated in the current research. The cracking risk of HSC reinforced with different volume fractions of PVAF was estimated based on the test results. The AS decreased, while the temperature drop, cracking age, cracking stress, and cracking stress/axial tensile strength of HSC increased with increasing PVAF volume fraction. The incorporation of PVAF increased the early-age compressive creep and tensile creep of HSC. The cracking risk of HSC estimated by the stress reserve or integrated criterion decreased with increasing PVAF volume fraction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Effect of mineral admixtures and curing periods on shrinkage and cracking age under restrained condition10.1016/j.conbuildmat.2008.05.023 ↗
2. Influence of super absorbent polymers on early-age behavior and tensile creep of internal curing high strength concrete10.1016/j.conbuildmat.2020.120068 ↗
3. Experimental investigation on correlation between autogenous shrinkage and internal relative humidity of superabsorbent polymers modified concrete
4. Greener engineered cementitious composite (ECC) - The use of pozzolanic fillers and unoiled PVA fibers10.1016/j.conbuildmat.2020.118211 ↗
5. The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete10.1016/S0008-8846(00)00479-8 ↗
6. Early-age behaviour and cracking potential of fly ash concrete under restrained condition10.1680/jmacr.18.00106 ↗
7. The effect of curing temperature on autogenous deformation of fly ash concretes10.1016/j.cemconcomp.2020.103574 ↗
8. Effect of temperature history and restraint degree on cracking behavior of early-age concrete10.1016/j.conbuildmat.2018.10.066 ↗
9. Restrained cracking failure behavior of concrete due to temperature and shrinkage10.1016/j.conbuildmat.2020.118318 ↗
10. Effects of different silica fume dosages on early-age behavior and cracking resistance of high strength concrete under restrained condition10.1016/j.conbuildmat.2020.120218 ↗
11. Effect of double hooked-end steel fiber on early-age cracking potential of high strength concrete in restrained ring specimens10.1016/j.conbuildmat.2019.07.319 ↗
12. Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation10.1016/j.cemconres.2004.09.004 ↗
13. Tensile basic creep behavior of lightweight aggregate concrete reinforced with steel fiber10.1016/j.conbuildmat.2018.12.138 ↗
14. Properties of early-age concrete relevant to cracking in massive concrete10.1016/j.cemconres.2019.05.015 ↗
15. A quantitative study on the plastic shrinkage cracking in high strength hybrid fibre reinforced concrete10.1016/j.cemconcomp.2007.03.005 ↗
16. Influence of ground granulated blast furnace slag on the early-age anti-cracking property of internally cured concrete10.1016/j.conbuildmat.2019.06.149 ↗
17. Influence of ground granulated blast furnace slag on early-age cracking potential of internally cured high performance concrete10.1016/j.conbuildmat.2019.117083 ↗
18. Basic creep of concrete under compression, tension and bending10.1016/j.conbuildmat.2012.08.024 ↗
19. Influence of Initial Cracks on the Frequency of a 60-year-old Reinforced Concrete Box Beam10.1680/jmacr.18.00276 ↗
20. Effect of high temperatures on high performance steel fibre reinforced concrete10.1016/j.cemconres.2006.03.024 ↗
21. Influence of Barchip fiber length on early-age behavior and cracking resistance of concrete internally cured with super absorbent polymers10.1016/j.conbuildmat.2019.03.209 ↗
22. The influence of fiber type and length on the cracking resistance, durability and pore structure of face slab concrete10.1016/j.conbuildmat.2021.122706 ↗
23. W. Hu, X. Yang, J. Zhou, H. Xing, J. Xiang, Experimental research on the mechanical properties of PVA fiber reinforced concrete, Res. J. Appl. Sci., Eng. Technol. 5 (18) (2013) 4563-4567. https://doi.org/10.19026/rjaset.5.4375.10.19026/rjaset.5.4375 ↗
24. Experimental investigation on the potential use of poly(vinyl alcohol) short fibers in fiber-reinforced cement-based composites10.1007/BF02498739 ↗
25. Study of crack resistance property of polyvinyl alcohol fiber reinforced concrete10.4028/www.scientific.net/AMR.287-290.178 ↗
26. Effect of PVA fiber content on creep property of fiber reinforced high-strength concrete columns
27. Effect of polyvinyl alcohol (PVA) fibre on dynamic and material properties of fibre reinforced concrete10.1016/j.conbuildmat.2013.08.035 ↗
28. Cracking behavior of concrete with shrinkage reducing admixtures and PVA fibers10.1016/j.cemconcomp.2009.08.004 ↗
29. Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)10.1016/j.conbuildmat.2014.12.071 ↗
30. Strength prediction models for PVA fiber-reinforced high-strength concrete10.1061/(ASCE)MT.1943-5533.0001279 ↗
31. Microstructure and bonding behavior of fiber-mortar interface in fiber-reinforced concrete10.1016/j.conbuildmat.2019.117235 ↗
32. S.L. Xu, S.L. Gao, Fracture and tensile properties of polyvinyl alcohol fiber reinforced cementitous composites, J. Wuhan Univ. Technol., Mater. Sci. Ed. 23 (1) (2008) 7–11. https://doi.org/10.1007/s11595-006-1007-z.10.1007/s11595-006-1007-z ↗
33. M. Dan, C.K. Lee, Y.X. Zhang, Flexural behaviour of reinforced polyvinyl alcohol-engineered cementitious composite beams, International conference on strain-hardening cement-based composites, 2017, pp. 441–447.10.1007/978-94-024-1194-2_51 ↗
34. Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles10.1016/j.conbuildmat.2014.02.040 ↗
35. Unrestrained early age shrinkage of concrete with polypropylene, PVA, and carbon fibers10.1617/s11527-006-9106-z ↗
36. Comparative study between natural and PVA fibers to reduce plastic shrinkage cracking in cement-based composite10.1016/j.conbuildmat.2015.05.028 ↗
37. Frost resistance and microstructure of engineered cementitious composites: influence of fly ash and micro poly-vinyl-alcohol fiber10.1016/j.cemconcomp.2011.10.002 ↗
38. Effect of PVA fiber on durability of cementitious composite containing nano-SiO210.1515/ntrev-2019-0011 ↗
39. Comparison of fly ash, PVA fiber, MgO and shrinkage-reducing admixture on the frost resistance of face slab concrete via pore structural and fractal analysis10.1142/S0218348X21400028 ↗
40. Modeling basic creep of concrete since setting time10.1016/j.cemconcomp.2017.07.023 ↗
41. High-performance fiber-reinforced concrete: a review10.1007/s10853-016-9917-4 ↗
42. Stress prediction in very early-age concrete subject to restraint under varying temperature histories10.1016/j.cemconcomp.2017.07.006 ↗
43. Early age creep and stress relaxation of concrete containing blended cements10.1007/BF02482107 ↗
44. Creep behavior of C-S-H under different drying relative humidities: Interpretation of microindentation tests and sorption measurements by multi-scale analysis10.1016/j.cemconres.2020.106036 ↗
45. Tensile creep behavior of concrete subject to constant restraint at very early ages10.1061/(ASCE)MT.1943-5533.0000671 ↗
46. Comparison of tensile and compressive creep of fly ash concretes in the hardening phase10.1016/j.cemconres.2017.02.018 ↗
47. Tensile creep and cracking resistance of concrete with different water-to-cement ratios at early age10.1016/j.conbuildmat.2017.04.056 ↗
48. Early age tensile creep of high performance concrete containing mineral admixtures: experiments and modeling10.1016/j.conbuildmat.2018.11.218 ↗
49. Effect of fiber types on creep behavior of concrete10.1016/j.conbuildmat.2015.12.149 ↗
50. Study on the creep behavior of PVA-ECC based on fractional-differential rheological model10.1016/j.conbuildmat.2019.117064 ↗
51. Tensile creep and cracking potential of high performance concrete internally cured with super absorbent polymers at early age10.1016/j.conbuildmat.2017.12.136 ↗
52. Tensile basic creep: measurements and behavior at early age
53. Comparison of concrete creep in tension and in compression: influence of concrete age at loading and drying conditions10.1016/j.cemconres.2013.04.001 ↗
54. Tensile basic creep versus compressive basic creep at early ages: comparison between normal strength concrete and a very high strength fibre reinforced concrete10.1617/s11527-013-0150-1 ↗
55. Plastic shrinkage cracking of polypropylene fiber reinforced concrete
56. Advanced techniques for the study of shrinkage-induced cracking of concrete with recycled aggregates at early age10.1016/j.conbuildmat.2019.117340 ↗
57. GB 175-2007/XG3-2018. Common Portland Cement, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and Standardization Administration of the People's Republic China, China, 2018 (in Chinese).
58. Testing system for determining the mechanical behaviour of early age concrete under restrained and free uniaxial shrinkage10.1007/BF02473424 ↗
59. Tensile creep due to restraining stresses in high-strength concrete at early ages10.1016/j.cemconres.2005.11.017 ↗
60. Creep and thermal cracking of ultra-high volume fly ash mass concrete at early age10.1016/j.cemconcomp.2019.02.018 ↗
61. Early-age tensile creep and cracking potential of concrete internally cured with pre-wetted lightweight aggregate10.1016/j.conbuildmat.2016.12.187 ↗
62. GB/T 50081-2019, Standard for Test Methods of Concrete Physical and Mechanical Properties, Ministry of Housing and Urban-Rural Development of the People's Republic of China, China, 2019 (in Chinese).
63. Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete10.1016/j.conbuildmat.2012.12.015 ↗
64. Mechanical properties of young concrete: Part I: Experimental results related to test methods and temperature effects10.1007/BF02479614 ↗
65. Maturity computer for controlled curing and hardening of concrete
66. Determination of time-zero and its effect on autogenous deformation evolution10.1080/19648189.2011.9695290 ↗
67. Examining the “time-zero” of autogenous shrinkage in high/ultra-high performance cement pastes10.1016/j.cemconres.2017.03.010 ↗
68. Time-zero and deformational characteristics of high performance concrete with and without superabsorbent polymers at early ages10.1016/j.conbuildmat.2020.120262 ↗
69. Experimental investigations on early-age tensile creep of internally cured high strength concrete under different initial stress/strength ratios10.1016/j.conbuildmat.2020.120313 ↗
70. Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures10.1016/j.conbuildmat.2014.03.023 ↗
71. Separation of thermal and autogenous deformation at varying temperatures using optical fiber sensors10.1016/j.cemconcomp.2007.01.005 ↗
72. Effect of internal curing with super absorbent polymers on autogenous shrinkage of concrete at early age10.1016/j.conbuildmat.2015.12.115 ↗
73. Estimation of temperature effects on autogenous shrinkage of concrete by a new prediction model10.1016/j.conbuildmat.2012.03.005 ↗
74. Improving test methods to measure early age autogenous shrinkage in concrete based on air cooling, IES
75. Early-age tensile basic creep behavioral characteristics of high-strength concrete containing admixtures
76. Early-age tensile creep and shrinkage induced cracking in internally restrained concrete members10.1680/jmacr.18.00038 ↗
77. Plastic shrinkage cracking in concrete materials - Influence of fly ash and fibers
78. Investigation of properties and performances of Polyvinyl Alcohol (PVA) fiber-reinforced rubber concrete10.1016/j.conbuildmat.2018.11.002 ↗
79. Influence of particle internal pores on hydration kinetics and microstructure development in tricalcium silicate hydration10.1007/978-981-33-6088-4 ↗
80. Mechanical properties of hybrid basalt-polyvinyl alcohol (PVA) fiber reinforced concrete10.4028/www.scientific.net/KEM.744.3 ↗
81. Autogenous deformation and coefficient of thermal expansion of early-age concrete: Initial outcomes of a study using a newly-developed Temperature Stress Testing Machine10.1016/j.cemconcomp.2021.103997 ↗
82. Parametric assessment of stress development and cracking in internally cured restrained mortars experiencing autogenous deformations and thermal loading10.1155/2011/870128 ↗
83. Influence of low curing temperatures on the tensile response of low clinker strain hardening UHPFRC under full restraint10.1016/j.cemconres.2019.105940 ↗
84. Prediction model for internal relative humidity in early-age concrete under different curing humidity conditions10.1016/j.conbuildmat.2020.119987 ↗
85. Static mechanical properties of polyvinyl alcohol fibre reinforced concrete (PVA-FRC)10.1680/macr.13.00320 ↗
86. Effect of silica fume and PVA fiber on the abrasion resistance and volume stability of concrete10.1016/j.compositesb.2017.07.058 ↗
87. Influence of cement and admixture on autogenous shrinkage of cement paste10.1016/0008-8846(95)00010-0 ↗
88. Early-age behavior and cracking resistance of high-strength concrete reinforced with Dramix 3D steel fiber10.1016/j.conbuildmat.2018.10.125 ↗
89. Thermo-mechanical response of UHPFRC at early age — Experimental study and numerical simulation10.1016/j.cemconres.2008.01.009 ↗
90. Early-age strain-stress relationship and cracking behavior of slag cement mixtures subject to constant uniaxial restraint10.1016/j.conbuildmat.2013.08.061 ↗
91. Tensile creep and early-age concrete cracking due to restrained shrinkage10.1016/j.conbuildmat.2017.05.081 ↗
92. Tensile basic creep of early-age concrete under constant load10.1016/S0008-8846(01)00691-3 ↗
93. Evaluation of zero-stress temperature prediction model for Portland cement concrete pavements10.1016/j.conbuildmat.2012.10.013 ↗
94. Simulation of the thermal stress in mass concrete using a thermal stress measuring device10.1016/j.cemconres.2008.12.008 ↗
95. Autogenous shrinkage and induced restraining stresses in high-strength concretes10.1016/S0008-8846(00)00399-9 ↗
96. Influence of Barchip fiber on early-age cracking potential of high performance concrete under restrained condition10.1016/j.conbuildmat.2018.07.121 ↗
97. Tensile creep behavior of high strength concretes at early ages10.1007/BF02479631 ↗
98. Correlation between the viscoelastic properties and cracking potential of engineered cementitious composites10.1016/j.conbuildmat.2014.08.089 ↗
99. Influence of curing temperature on autogenous shrinkage and cracking resistance of high-performance concrete at an early age10.1016/j.conbuildmat.2015.11.039 ↗
100. Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age10.1016/j.conbuildmat.2015.08.093 ↗