The effect of initial strength of concrete wastes on the fresh and hardened properties of recycled concrete reinforced with recycled steel fibers
Source abstract
Abstract
Abstract The initial strength of concrete wastes is one of the most influential parameters in the behavior of recycled concrete. In this paper, in the production of recycled concrete aggregates (RCA), three types of concrete wastes with initial strength of 20, 40, and 80 MPa were used. Natural aggregates (NA) were replaced by RCAs with amounts of 0, 50, and 100% by volume. In addition, the specimens were reinforced with 0, 0.5, and 1% by volume of recycled steel fibers from scrap tires (RSF). Workability, water absorption, ultrasonic pulse velocity (UPV), mechanical properties (compressive strength, splitting tensile strength, and flexural strength) as well as economic aspects of 21 mixtures were assessed. The results showed that the use of RCAs have a negative effect on the workability, quality, and mechanical properties of concrete, which can be prevented by increasing the initial strength of RCAs and also using RSF. Finally, multi-criteria optimization (MCO) indicated that the use of RSF and 50% RCAs with initial strength of 40 and 80 MPa is justified, in terms of workability, quality, water absorption, mechanical properties, and economic aspects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Assessment of longitudinal and transversal plastic behavior of recycled aggregate self-compacting concrete: a two-way study10.1016/j.conbuildmat.2021.123426 ↗
2. Study on the influence of attached mortar content on the properties of recycled concrete aggregate10.1016/j.conbuildmat.2008.04.012 ↗
3. Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation10.1016/j.cemconcomp.2013.01.006 ↗
4. Establishing a relationship between modulus of elasticity and compressive strength of recycled aggregate concrete10.1016/j.jclepro.2015.10.064 ↗
5. Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete
6. Parametric study of functionally graded concretes incorporating steel fibres and recycled aggregates10.1016/j.conbuildmat.2020.118186 ↗
7. Characterization of concrete containing RCA and GGBFS: mechanical, microstructural and environmental properties10.1016/j.conbuildmat.2021.123134 ↗
8. Effect of fine recycled concrete aggregate on the mechanical behavior of self-compacting concrete10.1016/j.conbuildmat.2020.120671 ↗
9. Comparative tests of beams and columns made of recycled aggregate concrete and natural aggregate concrete10.3151/jact.5.259 ↗
10. Effect of different types of recycled concrete aggregates on equivalent concrete strength and drying shrinkage properties10.3390/app8112190 ↗
11. Behavior of reinforced concrete beams with recycled concrete coarse aggregates, structural
12. Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete10.1016/j.compstruct.2017.08.086 ↗
13. Experimental study on bond behavior in fiber-reinforced concrete with low content of recycled steel fiber10.1061/(ASCE)MT.1943-5533.0001534 ↗
14. Behavior of composite self-compacting concrete (SCC) reinforced with steel wires from waste tires
15. Fiber-reinforced concrete with low content of recycled steel fiber: shear behaviour10.1016/j.conbuildmat.2017.11.101 ↗
16. Compressive strength enhancement of concrete reinforced by waste steel fibers utilizing nano SiO2, Middle East
17. Shear strengthening of RC beams with thin panels of mortar reinforced with recycled steel fibres10.1016/j.jclepro.2018.05.096 ↗
18. On the mechanical response of hybrid fiber reinforced concrete with recycled and industrial steel fibers10.1016/j.conbuildmat.2017.04.160 ↗
19. Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)10.1016/j.conbuildmat.2016.08.046 ↗
20. Steel fibers from waste tires as reinforcement in concrete: a mechanical characterization10.1016/j.conbuildmat.2012.04.088 ↗
21. Mechanical propertis of fiber reinforced concretes produced from building demolished waste
22. Experimental study on the flexural behaviour and ductility ratio of steel fibres coarse recycled aggregate concrete beams10.1016/j.conbuildmat.2018.07.132 ↗
23. A comparison of the effects of pozzolanic binders on the hardened-state properties of high-strength cementitious composites reinforced with waste tire fibers10.1016/j.compositesb.2018.10.100 ↗
24. Comparative study on performance of manufactured steel fiber and shredded tire recycled steel fiber reinforced self-consolidating concrete10.1016/j.conbuildmat.2020.121102 ↗
25. An experimental study on the post-cracking behaviour of hybrid industrial/recycled steel fiber-reinforced concrete10.1016/j.conbuildmat.2015.07.007 ↗
26. Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires10.1016/j.conbuildmat.2016.06.113 ↗
27. ASTM C150 / C150M-20, Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, 2020.
28. ASTM C33 / C33M–18, Standard Specification for Concrete Aggregates, ASTM International 2018 West Conshohocken, PA.
29. ASTM C39 / C39M–21, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International 2021 West Conshohocken, PA.
30. Experimental investigation of (FRSC) cementitious composite functionally graded slabs under projectile and drop weight impacts
31. Assessment of hybrid FRSC cementitious composite with emphasis on flexural performance of functionally graded slabs
32. Flexural and impact performance of functionally graded reinforced cementitious composite (FGRCC) panels10.1016/j.istruc.2020.12.042 ↗
33. Effect of purposive distribution of fibers to prevent the penetration of bullet in concrete walls, KSCE
34. Flexural behavior of self-compacting concrete reinforced with different types of steel fibers10.1016/j.conbuildmat.2013.05.072 ↗
35. Life cycle assessment of steel production in Poland: a case study10.1016/j.jclepro.2013.04.031 ↗
36. Strength and permeability characteristics of Fibre reinforced recycled aggregate concrete with different fibres
37. N. Taranu, R. Andrei, L. Dumitrescu, S. G. Maxineasa., Using Recycled Components from Post-Consumer Tyres in Construction Materials Industry, Geoconference on Energy and Clean Technologies, Stef92 Technology Ltd, Sofia. (2014) 259–264.10.5593/SGEM2014/B42/S18.034 ↗
38. Effects of waste steel fibers on strength and stress strain behavior of concrete incorporating silica nanopowder
39. Splitting tensile strength assessment of lightweight foamed concrete reinforced with waste tyre steel fibres
40. Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength10.1016/j.wasman.2008.12.002 ↗
41. Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires10.1680/macr.14.00232 ↗
42. Shrinkage and flexural behaviour of free and restrained hybrid steel fibre reinforced concrete10.1016/j.conbuildmat.2018.09.052 ↗
43. Alternative processing procedures for recycled aggregates in structural concrete10.1016/j.conbuildmat.2014.06.084 ↗
44. ASTM C125–19, Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM International 2019 West Conshohocken, PA.
45. ASTM C131 / C131M–20, Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine, ASTM International 2020 West Conshohocken, PA.
46. ASTM C143 / C143M–20, Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International 2020 West Conshohocken, PA.
47. Temporal flowability evolution of slag-based self-compacting concrete with recycled concrete aggregate10.1016/j.jclepro.2021.126890 ↗
48. Influence of production and processing on the properties of fibre reinforced concrete (FRC), international workshop on advances in fiber reinforced concrete
49. ASTM C642–13, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International 2013 West Conshohocken, PA.
50. BS 1881 - Part 201 \Guide to the use of nondestructive methods of test for hardened concrete“, British Standards Institution (2009).
51. Effect of rice husk ash on the strength and durability characteristics of concrete10.1016/j.conbuildmat.2011.04.009 ↗
52. Impact resistance of hybrid fibre-reinforced oil palm shell concrete10.1016/j.conbuildmat.2013.10.016 ↗
53. Soniscope tests concrete structures
54. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
55. Performance of recycled aggregate concrete monitored by durability indexes10.1016/S0008-8846(01)00653-6 ↗
56. Influence of recycled aggregates on mechanical properties of HS/HPC10.1016/S0958-9465(01)00012-9 ↗
57. Influence of recycled aggregates on properties of self-consolidating concretes10.1016/j.conbuildmat.2016.03.079 ↗
58. ASTM C496 / C496M–17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International 2017 West Conshohocken, PA.
59. Mechanical, durability and microstructural characteristics of ultrahigh-strength self-compacting concrete incorporating steel fibers10.1016/j.matdes.2009.04.024 ↗
60. Self-compacting concrete incorporating steel and polypropylene fibers: compressive and tensile strengths, moduli of elasticity and rupture, compressive stress–strain curve, and energy dissipated under compression10.1016/j.compositesb.2013.04.044 ↗
61. Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)10.1016/j.conbuildmat.2015.08.112 ↗
62. Investigation of reinforced concrete beams behavior of steel fiber added lightweight concrete10.1016/j.conbuildmat.2012.09.022 ↗
63. Properties of concrete made with crushed concrete as coarse aggregate10.1680/macr.1985.37.130.29 ↗
64. ASTM C1609/C1609M–19a, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM International 2019 West Conshohocken, PA.
65. Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates10.1016/j.conbuildmat.2019.07.211 ↗
66. Mechanical behavior of ultra-high performance concrete (UHPC) using recycled fine aggregate cured under different conditions and the mechanism based on integrated microstructural parameters10.1016/j.conbuildmat.2018.10.117 ↗
67. Optimization of fibre reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
68. Experimental design for formulation
69. Compressive strength and rapid chloride permeability of concretes with ground fly ash and slag10.1061/(ASCE)0899-1561(2009)21:9(494) ↗
70. Characterization and optimization of hardened properties of selfconsolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers10.1016/j.compositesb.2018.06.021 ↗
71. Carbon dioxide sequestration on fly ash/waste glassalkali-based mortars with recycled aggregates: compressive strength, hydration products, carbon footprint, and cost analysis, woodhead publishing series in civil and structural