Full size testing and detailed micro-modeling of the in-plane behavior of FRCM–reinforced masonry
Source abstract
Abstract
Abstract Fiber Reinforced Cementitiuos Mortars (FRCM) are a relatively new class of reinforcement used in conservation engineering. However, the structural response of shear walls reinforced with non-isotropic composite material nets, bonded with relatively low-strength and non-elastic mortar matrices is difficult to study with numerical models. The reliability of numerical models could be improved if experimental data was available from full size testing. However, such data is expensive to obtain as large specimens are needed. In this paper, an experimental campaign was carried out at the laboratory on 12 full size wall panels. These were tested in diagonal tension to assess their shear behavior in unreinforced and FRCM-reinforced configurations. Some manipulation of the data is required in order to interpret the experimental results, but diagonal tension testing has many advantages over other testing methods to study the shear behavior of masonry walls. In general the results have demonstrated that FRCM strengthening of shear walls is an effective retrofitting method. Different reinforcement schemes (single- and double-sided retrofits) and bonding inorganic matrices have been studied. Lastly, a two-step non-linear numerical procedure, calibrated with characterization test data and benchmarked on the laboratory outcomes (i.e. full scale testing), has been also implemented to define an effective tool for predicting the shear behavior of reinforced walls.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Hygrothermal properties of building materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A simplified analysis of the total seismic hazard in Italy10.1016/j.enggeo.2020.105511 ↗
2. Strong ground motion characteristics from 2016 Central Italy earthquake sequence10.1193/091817EQS184M ↗
3. Italian Senate, Report No. 01077470 (2017) Earthquakes. Central Italy 2016, Emilia 2012, L’Aquila 2009: reconstruction resources and laws, Rome, Italy.
4. Assessment and analysis of damage in L’Aquila historic city centre after 6th April 200910.1007/s10518-010-9224-4 ↗
5. Reconnaissance investigation on the damage of the 2009 L'Aquila, Central Italy earthquake10.1080/13632460903584055 ↗
6. Seismic behaviour of ordinary masonry buildings during the 2016 central Italy earthquakes10.1007/s10518-018-0370-4 ↗
7. Fiber-reinforced polymer strengthening of unreinforced masonry walls subject to out-of-plane loads
8. Out-of-plane behavior of unreinforced masonry walls strengthened with FRP strips10.1016/j.compscitech.2006.08.021 ↗
9. Modeling out-of-plane behavior of URM walls retrofitted with fiber composites10.1061/(ASCE)1090-0268(2000)4:4(172) ↗
10. Discrete element modelling of the in-plane and out-of-plane behaviour of dry-joint masonry wall constructions10.1016/j.engstruct.2017.01.020 ↗
11. The Reticulatus method for shear strengthening of fair-faced masonry10.1007/s10518-016-0006-5 ↗
12. Experimental performance of FRCM retrofit on out-of-plane behaviour of clay brick walls10.1016/j.compositesb.2018.04.062 ↗
13. Out-of-plane maximum resisting bending moment of masonry walls strengthened with FRCM composites10.1016/j.compstruct.2018.04.054 ↗
14. In-plane resistance of reinforced masonry shear walls10.1061/(ASCE)0733-9445(1990)116:3(619) ↗
15. Experimental analysis and detailed micro-modeling of masonry walls subjected to in-plane shear10.1016/j.engfailanal.2018.08.030 ↗
16. Garbin, E., Valluzzi, M.R., Modena, C., & Oliveira, D.V., & Lourenço, P.B. (2006). Experimental investigation on the structural behaviour and strengthening of three-leaf stone masonry walls, In Proceedings of Structural Analysis of Historical Constructions – SAHC, New Delhi 2006.
17. Experimental evaluation of in-plane shear behaviour of masonry walls retrofitted using conventional and innovative methods
18. Shear behavior of unreinforced and reinforced masonry panels subjected to in situ diagonal compression tests10.1016/j.conbuildmat.2011.01.009 ↗
19. Strengthening of unreinforced masonry using welded wire mesh and micro-concrete–Behaviour under in-plane action10.1016/j.conbuildmat.2013.12.033 ↗
20. Repair of in-plane shear damaged masonry walls with external FRP10.1016/j.conbuildmat.2010.09.030 ↗
21. Modelling approaches of the in-plane shear behaviour of unreinforced and FRP strengthened masonry panels10.1016/j.compstruct.2005.04.012 ↗
22. Static cyclic in-plane shear response of damaged masonry walls retrofitted with NSM FRP strips–An experimental evaluation10.1016/j.engstruct.2012.10.026 ↗
23. Preservation of historical monumental structures using fibre reinforced polymer (FRP)-case studies10.1016/j.proeng.2013.03.043 ↗
24. Venice Charter (1964) International Charter for the Conservation and Restoration of Monuments and sites, (ICOMOS). In Proceedings of the 2nd International Congress of Architects and Technicians oh Historical Monuments, Venice, Italy.
25. ICOMOS–ISCARSAH Committee (2003) ICOMOS Charter—Principles for the analysis, conservation and structural restoration of architectural heritage. In Proceedings of the ICOMOS 14th General Assembly and Scientific Symposium, Victoria Falls, Zimbabwe (Vol. 2731).
26. Borri, A., & Corradi, M. (2019). Architectural heritage: A discussion on conservation and safety. Heritage, 2(1), 631-647.10.3390/heritage2010041 ↗
27. Environmental ageing on GFRP pultruded joints: comparison between different adhesives10.1016/j.compstruct.2015.07.067 ↗
28. Ageing of carbon/epoxy and carbon/vinylester composites used in the reinforcement and/or the repair of civil engineering structures10.1016/j.compositesb.2012.01.001 ↗
29. FRCM-strengthened CMU masonry walls subjected to out-of-plane load
30. Shear strengthening of masonry wallettes resorting to structural repointing and FRCM composites10.1016/j.conbuildmat.2019.02.044 ↗
31. Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading10.1617/s11527-006-9207-8 ↗
32. Mechanical characterization and thermal conductivity measurements using of a new'small hot-box'apparatus: innovative insulating reinforced coatings analysis10.1016/j.jobe.2016.05.005 ↗
33. Pseudo-static cyclic loading comparison of reinforced masonry walls strengthened with FRCM or NSM FRP10.1016/j.conbuildmat.2018.02.043 ↗
34. Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements10.1016/j.compositesb.2017.06.018 ↗
35. Cyclic bond behavior of FRCM composites applied on masonry substrate10.1016/j.compositesb.2019.04.009 ↗
36. ASTM, E. (2007). 519-07. Standard Test Methods for Diagonal Tension (Shear) in Masonry,” American Society of Testing and Materials, West Conshohocken, PA.
37. RILEM. LUMB6 – Diagonal tensile strength tests of small wall specimens. Technical Report, RILEM; 1994.
38. BS EN 771-1 (2011) Specification for masonry units. Clay masonry units.
39. Experimental study on the determination of strength of masonry walls10.1016/S0950-0618(03)00007-2 ↗
40. ASTM C348 – 21, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars.
41. ASTM C349 – 18 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure).
42. Italian Building Code (2018) Norme tecniche per le Costruzioni – NTC 2018, Rome, Italy (in Italian).
43. A database of the structural behavior of masonry in shear10.1007/s10518-018-0328-6 ↗
44. Mechanical characterisation of Tuscany masonry typologies by in situ tests10.1007/s10518-018-0451-4 ↗
45. Repairing brickwork panels using titanium rods embedded in the mortar joints
46. Willam KJ, & Warnke ED. Constitutive model for the triaxial behaviour of concrete. In Proceeding of the International Association for Bridge and Structural Engineering, Bergamo, Italy; 1975.
47. Prediction of solid block masonry prism compressive strength using FE model10.1617/s11527-009-9524-9 ↗
48. Simple holonomic homogenization model for the non-linear static analysis of in-plane loaded masonry walls strengthened with FRCM composites10.1016/j.compstruct.2016.09.027 ↗
49. A fast modeling approach for numerical analysis of unreinforced and FRCM reinforced masonry walls under out-of-plane loading10.1016/j.compositesb.2019.107553 ↗